WMS:SCS Lag Time Equation: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 5: Line 5:
where:
where:


<math>T_{LAG}</math> = lag time in hours.
:''T<sub>LAG</sub>'' = lag time in hours.


<math>L</math> = hydraulic length of watershed in feet.
:''L'' = hydraulic length of watershed in feet.


<math>S</math> = maximum retention in the watershed in inches as defined by:
:''Y'' = watershed slope in percent.


:<math>S = \frac {1000}{CN} -10 </math>
:''S'' = maximum retention in the watershed in inches as defined by:


<math>Y</math> = watershed slope in percent.
::<math>S = \frac {1000}{CN} -10 </math>


<math>CN</math> = SCS curve number for the watershed as defined by the loss method.
::''CN'' = SCS curve number for the watershed as defined by the loss method.




Line 23: Line 23:


{{WMSMain}}
{{WMSMain}}
[[Category:Equations|S]]
[[Category:Equations|SCS]]
[[Category:WMS Basins|SCS]]

Latest revision as of 15:14, 29 September 2017

Perhaps the most commonly used equation for lag time is the SCS equation (1972) as shown. This equation may be used when computing the unit hydrograph using Snyder's method and any of the preceding equations for lag time may also be used when computing the unit hydrograph using the SCS method. Also remember that the SCS used the relationship relating lag time and time of concentration (Overview of Basin Data Equation) to compute lag time (and the other way around) from any of the time of concentration equations which follow.

where:

TLAG = lag time in hours.
L = hydraulic length of watershed in feet.
Y = watershed slope in percent.
S = maximum retention in the watershed in inches as defined by:
CN = SCS curve number for the watershed as defined by the loss method.


Related Topics