WMS:Storm Drain
The storm drain coverage is used for defining urban hydraulic models. The procedure for defining hydraulic models in this coverage is similar to defining other hydraulic models since streams, ditches, and sewer pipes are created from upstream to downstream. Currently, this coverage only supports links and nodes for the SWMM model.
When having created a conceptual model in the storm drain coverage, select the Map→1D Schematic menu item from the Storm Drain menu to generate a hydraulic schematic from the coverage. After having done this, define model specific data on the hydraulic schematic in the river module.
In other words, here are the steps to take to define a simple urban hydraulic model:
- Create a new storm drain coverage.
- Define any pipes, ditches, and streams as arcs going from upstream to downstream in the storm drain coverage.
- Select the Map to 1D Schematic menu item
- Go to the River module
- Define model-specific data in the river module (currently, only SWMM model data is supported).
The Storm Drain model can be added to a paid edition of WMS.
Storm Drain Menu
The Storm Drain menu is available in the map module when a Storm Drain coverage type is selected as the active coverage. This menu contains the Map→1D Schematic menu command. The menu is shown below:
Map to 1D Schematic
The Map→1D Schematic menu item creates a hydraulic schematic based on the configuration of the arcs and nodes in a Storm Drain or 1D Hydraulic Centerline coverage. If a schematic already exists for this coverage, the existing schematic is updated based on the coverage configuration.
Importing Storm Drain Shapefiles and LandXML Files
WMS has options to import storm drain attributes from either a set of point and node shapefiles or from a LandXML files. Shapefiles are commonly used GIS vector data files. Government agencies often store storm drain network information in a GIS database and exporting these databases to point and arc shapefiles allows importing the data in these databases into WMS. A LandXML file is a commonly used file format that can be exported from all the major CAD software applications. One feature of LandXML files is the ability to store storm drain, sanitary sewer, or culinary water distribution network information. WMS imports this information directly from LandXML files.
When importing a LandXML file, WMS automatically generates a hydraulic schematic and transfers the information in the LandXML file to the SWMM model inputs. When importing point and arc shapefile data, convert the shapefiles to feature objects in a storm drain coverage, map any attributes that need to be mapped, and make sure the storm drain network is topologically correct. When using a shapefile, select the Map to 1D Schematic command after making sure the storm drain network is properly defined in a storm drain coverage in the map module.
FHWA Storm Drain Simulations
This contains information about features no longer in use for the current release of WMS. The content may not apply to current versions. |
- NOTE: The FHWA Storm Drain coverage and model has been deprecated in versions of WMS after 9.1.
- FHWA Storm Drain Nodal Attributes
- Run Simulation
- Build an FHWA Storm Drain simulation by creating Storm Drain-FHWA type coverage. The Storm Drain coverage type (NOT Storm Drain-FHWA) is used for building HY-12 and SWMM models.
- When running an FHWA Storm Drain simulation (by invoking the Run Simulation of the Storm Drain-FHWA menu), an input file is saved and the storm drain program started using the defined input file. An output file name is also required and all of the output generated by the hydraulic analysis is saved to this file.
- Plots of results can be created by reading the output file generated using the Read Solution command and then setting up an FHWA Storm Drain plot using the Plot Wizard.
- Read Solution
- After running the FHWA storm drain model and creating a solution file, plots of results can be created by reading the output file using the Read Solution command and then setting up an FHWA Storm Drain plot using the Plot Wizard.
- Save Simulation
- If there are defined arcs representing pipes and nodes in a Storm Drain-FHWA coverage, WMS can save the simulation using the Save Simulation command. WMS will save a Storm Drain model in the correct format to run the FHWA storm drain model.
Storm Drain Feature Objects
The Storm Drain coverage used to generate HY-12 and SWMM models does not have any attributes for feature objects. This coverage is for storing the storm drain geometry. The FHWA Storm Drain coverage allows attributes for Storm Drain nodes.
Related Topics
WMS – Watershed Modeling System | ||
---|---|---|
Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter | |
Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
Aquaveo |