MODPATH Project Workflow
From XMS Wiki
Jump to navigationJump to search
To build a MODPATH model in GMS, use the following steps:
1. Start with a completed MODFLOW Project. |
---|
|
2. Assign porosities. |
---|
3. Define starting locations |
---|
4. Set particle set properties. |
---|
5. Create additional particles sets. |
---|
6. Run MODFLOW. |
---|
|
7. Visualize the solution. | ||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
GMS – Groundwater Modeling System | ||
---|---|---|
Modules: | 2D Grid • 2D Mesh • 2D Scatter Point • 3D Grid • 3D Mesh • 3D Scatter Point • Boreholes • GIS • Map • Solid • TINs • UGrids | |
Models: | FEFLOW • FEMWATER • HydroGeoSphere • MODAEM • MODFLOW • MODPATH • mod-PATH3DU • MT3DMS • MT3D-USGS • PEST • PHT3D • RT3D • SEAM3D • SEAWAT • SEEP2D • T-PROGS • ZONEBUDGET | |
Aquaveo |