GMS:Interpolation Commands: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 14: Line 14:


When one of the interpolation commands is selected, the ''Interpolate'' dialog appears.
When one of the interpolation commands is selected, the ''Interpolate'' dialog appears.
[[File:InterpolateToObject.png|thumb|none|225 px|Example of the ''Interplate → Objects'' dialog]]





Revision as of 15:23, 15 June 2016

GMS Commands
Common
File
Edit
Display
Modules
TINs
Boreholes
Solids
Mesh (2D)
Grid (2D)
Scatter Points (2D)
Interpolation (2D and 3D)
Mesh (3D)
Grid (3D)
Scatter Points (3D)
Feature Objects
GIS
UGrid
Models
FEMWATER
MODAEM
MODFLOW
mod-PATH3DU
MODPATH
MT3DMS
SEAWAT
SEEP2D
T-PROGS
UTEXAS

Once a 3D interpolation scheme has been selected and the appropriate parameters for the selected scheme have been input, the dataset of the active scatter point set can be interpolated to another object. During the interpolation process, a new dataset is constructed for the target object containing the interpolated values. A separate interpolation command is provided for interpolating to each of the target objects. The interpolation commands are found in the Interpolation menu. The commands in this menu are as follows:

Interpolate → Active TIN
Interpolates to the vertices of the active TIN.
Interpolate → 2D Mesh
Interpolates to the nodes of the 2D finite element mesh.
Interpolate → 2D Grid
Interpolates to the 2D finite difference grid. The interpolation is done either to the grid nodes or to the grid cell centers depending on whether the grid is a mesh-centered or cell-centered grid. (See 2D Grid Types.)
Interpolate → 3D Mesh
Interpolates to the nodes of the 3D finite element mesh.
Interpolate → 3D Grid
Interpolates to the 3D finite difference grid. The interpolation is done either to the grid nodes or to the grid cell centers depending on whether the grid is a mesh-centered or cell-centered grid. (See 2D Grid Types.)
Interpolate → MODFLOW Layers
The Interpolate to MODFLOW Layers commmand allows interpolating from 2D scatter data to MODFLOW data: top and bottom layer elevations, LPF array data (HK, VK, etc), recharge.
Interpolate → UGrid
Interpolates to the cells of the active UGrid.
Gaussian Simulation Options
Gaussian Sequential Simulation (GSS) is a form of Kriging that can only be used for 2D interpolation and only works when interpolating to 3D cell-centered grids.
Jackknifing
3D Jacknifing is identical to 2D Jacknifing.

When one of the interpolation commands is selected, the Interpolate dialog appears.

Example of the Interplate → Objects dialog


See also