WMS:Post Processing

From XMS Wiki
Jump to navigationJump to search

After finishing a stochastic simulation there are two primary results read back into WMS for each simulation: hydrographs from the HEC-1 model, and the floodplain depths and water surface elevations for each run.

Hydrographs

A series of hydrographs are loaded for each hydrograph station and can be viewed in the normal way hydrographs are viewed.

HydrographStationPlot.jpg

Floodplains

Each floodplain delineation results in a water surface elevation and a flood depth dataset. Each pair of datasets are organized in a folder underneath the TIN in the Project Explorer. Set the contour options for a TIN and select the dataset to be active and displayed from the Project Explorer.

File:DatasetPairs.gif

Probabilistic Floodplain Boundary

A final dataset showing the probability of flooding is also created from all of the individual floodplain datasets. The probabilistic flood plain indicates for each vertex on the TIN the percentage of model runs that resulting in inundation at the point.

File:Image136.jpg
Close up view

Annual Exceedance Probability (AEP) Map

When using the stochastic hydrologic/hydraulic/floodplain delineation tools it is possible to generate an annual exceedance probability map. This is done by generating inundation maps that consider the range of all possible floods for all return periods. The result is a map that identifies the annual exceedance probability of flooding for every TIN vertex. For example if a point is flooded 10 times in 1000 simulations then it would represent the .01 probability. The Return Period → Feature Objects... command allows the user to generate contours from the AEP map for specified return periods. Remember that such a map does not represent a solution from a single set of input parameters, but is rather the composite of several hundred or thousand simulations.

AEPMAP.jpg


Previous Step in Stochastic Modeling

Related Topics