WMS:Recompute All Stations

From XMS Wiki
Revision as of 18:06, 4 September 2014 by Jcreer (talk | contribs)
Jump to navigationJump to search

The Recompute All Stations command updates river station information for the 1D hydraulic centerline and the 1D hydraulic cross section coverages. If the user has made any changes to centerline arcs in the 1D hydraulic centerline coverage that changes the cross section stations in the 1D hydraulic cross section coverage, then use this command. For example, if there are some cross sections with negative station values, using this command should fix the cross section stations. To update the cross section stations, first use this command in the 1D hydraulic centerline coverage and then use this command in the 1D hydraulic cross section coverage. This will insure the cross section stations are set to the correct values. This command does the following in the 1D hydraulic centerline and 1D hydraulic cross section coverages:

1D Hydraulic Centerline Coverage

This command recomputes the length and stationing along any centerline arcs in a 1D hydraulic centerline coverage.

1D Hydraulic Cross Section Coverage

This command recomputes the cross section stations for a 1D hydraulic cross section coverage.


Related Topics