Search results

To use [[WMS:Display Options|Display Options]] in WMS, use the following steps: !style="text-align:left;"|1. Open the Display Options.

A drawing grid can be activated using the '''Grid Options''' command in the ''Display'' menu. ...he drawing grid. The Grid color window specifies the color that is used to display the drawing grid in the ''Graphics Window''.

[[Image:WMS Display Options 2D Grid.jpg|thumb|500 px|''Display Options'' dialog showing the ''2D Grid'' tab]] ...et, the component is displayed when the grid is redrawn. The color used to display the component can be set using the pop-up color window to the left of the t

...that only the shapefile format is supported, and many of the selection and display capabilities are minimal. .... If a license is not found then the ArcView® functions remain dimmed, but WMS is able to do many of the same things, the primary limitation being that on

#redirect [[Projection Dialogs]] ...each projection and the information in these dialogs can be found in the [[WMS:Projections]] article.

...ol Cards'' toggle box, and then selecting a job control card from the text display window. *[[WMS:Basin HEC-1 Cards|Basin HEC-1 Cards]]

...S:Vector Display Options|''Vectors'']] tabs of the [[SMS:Display Options|''Display Options'']] dialog. ...or ramp'' dialog allows the user to select a color palette for the contour display. A selected color palette will be applied to the contours of the selected m

...and the ''TIN-Drainage'' tab. Also the ''Drainage Data'' tab controls the display of text with computed geometric parameters for watersheds done with either [[Image:WMSdisplayopts.jpg|thumb|500 px|Display Options dialog]]

[[Image:WMS XY SeriesEditor.jpg|thumb|none|left|600 px|Example of the ''XY Series Edito The ''Show Dates'' option can be used to display the date and time at each point if the data is time series data. The increm

...ow is calculated. Once all of the items listed in this window are entered, WMS performs the calculation for peak discharge and displays the result in the ...eak discharge is computed. The primary purpose for including the different display options is so that all results can be copied to the clipboard and then past

[[File:WMS Model Wrapper Dialog.png|thumb|right|550px|''Model Wrapper'' dialog]] The ''Model Wrapper'' dialog in WMS is used to display what is happening during a model run. The following information is displaye

...e to enable importing, exporting, viewing, and editing DSS files inside of WMS. ...d edit a DSS file. This dialog comes up when reading a DSS file from the [[WMS:XY Series Editor|XY Series Editor]] or from the '''Open''' command in the '

...ty curves, but the primary use of ''Plot Windows'' is to [[WMS:Hydrographs|display the hydrographs]] that result from hydrologic modeling simulations. ===Display Options===

...rd guides the user through setting up the application on each system. Once WMS is installed, default settings can be adjusted and saved. ...stallation process, make sure the computer meets the [[System Requirements|WMS System Requirements]].

#Open the *.dem file in WMS {{Raster Display Options}}

{{WMS Deprecated Feature}} ...play in the WMS window according to this projection and any data mapped to WMS coverages will be mapped into the coordinate system specified by the ''Map

WMS uses a third party set of DLLs to read CAD files. This is done so that WMS can stay current with evolving changes in DXF and other file formats. Previ WMS can use CAD files as base map (background) information to the project, and

[[File:WMS Film Loop.png|thumb|400 px|Example of the ''Film Loop Setup'' wizard.]] One of the most powerful 2D visualization tools in WMS is animation. An animation sequence can be generated for a grid with a tran

|label5 = WMS ...rt the data from the object projection to the display projection, just for display purposes. This is referred to as "Project on the fly". The data itself ma

Like the other models supported by WMS, the Rational Method can be defined for a watershed/catchment developed fro *''Display''

[[File:WMS GSSHA Solution Analysis dialog.png|thumb|450 px|''GSSHA Solution Analysis'' ...t dot button.png|16px]] button in the ''Solution Results'' column in the [[WMS:GSSHA Feature Nodes#Properties Dialog|GSSHA feature points/nodes ''Properti

...anizing all the datasets associated with the several models and modules in WMS. In the 2D Grid module, the Project Explorer serves to store and modify the ...rves as a manager for all of the gridded datasets that have been read into WMS. When other modules are active the Project Explorer references TINs, DEMs,

...on of MODRAT input data. Furthermore, MODRAT can be launched directly from WMS through menu options. These menus can be found in the Hydrologic Modeling m * [[WMS:MODRAT#Saving_and_Reading_MODRAT_Files|'''Save MODRAT File''']] – Sa

...e drainage basin boundaries option in the Drainage [[WMS:Display Options|''Display Options'']] dialog is automatically set when defining basins. ...boundaries can be split using the '''Refine Boundaries''' command in the [[WMS:Drainage_Module_Menus#Drainage_TIN_Menu|''TIN'']] menu for the Drainage mod

'''Solid Color''' will display all contours according to the specified color at the bottom of the palette * [[WMS:Contour Options|Contour Options]]

Output for several of the hydrologic models includes a hydrograph. WMS allows hydrographs to be displayed and compared. Multiple hydrographs can b The hydrograph should be selected prior to bringing up the [[WMS:Detention Basin Calculator|detention basin calculator]].

...an elevation discharge relationship with an appropriate elevation step and display it in the detention basin calculator. When defining a weir the parameters c ...levation-discharge computations for this crossing are then assigned to the WMS Elevation Discharge relationship. The hydrograph is routed based on the HY

|label5 = WMS ...rt the data from the object projection to the display projection, just for display purposes. This is referred to as "Project on the fly". The data itself ma

This dialog allows controlling the shading of faces in the GMS, SMS, or WMS display. By default, all objects are displayed in the color specified by their attr ...File:Lighting Options Macro.svg|13 px]] macro or ''Lighting'' tab in the ''Display Options'' dialog. The default options vary between applications, and the op

#In ''Display Options'', turn on the contours. Turning on color filled contours with tran * [[WMS:SMPDBK|Simplified Dam-Break Analysis]]

WMS includes an interface to the Orange County Rational Method which can be use All of the computations for peak flows and routing are done within WMS.

...SHA Storm Drain)|''Properties'' dialog]]. This is only accessible when a [[WMS:GSSHA Storm Drain#GSSHA Storm Drain Coverage|GSSHA storm drain coverage]] i ...commended to add more than one pipe (two nodes) between superjunctions. In WMS, superlinks are represented as arcs and superjunctions are represented by t

...string crosses triangle edges, a prompt will ask if wanting to insert a [[WMS:TIN Breaklines|breakline]]. The breakline is inserted by creating new poin The '''Delete Stream Segments''' command (in the [[WMS:Drainage_Module_Menus#Drainage_TIN_Menu|''TIN'']] menu for the Drainage mod

...soil type coverage for by selecting the appropriate toggle boxes in the ''Display parameters'' (lower left) section of the ''Soil Type Mapping'' dialog (show ...ng, it's necessary to link the appropriate soil type variables to each ID. WMS allows completing this in one of two ways. First of all, with the soil type

This menu is available when a GSSHA coverage is the active coverage, or if WMS is switched to the '''Map''' [[File:Map Module Icon.svg|16px]] module. : Opens the [[WMS:Smooth GSSHA Streams#Stream Smoothing|''Smooth GSSHA Streams'' dialog]].

...options being edited is determined by either the current module and/or the display options dialog from which the contour options are activated. For 2D grids If the ''Log Scale'' option is selected, WMS automatically assigns contour intervals as multiples of 10. Furthermore, if

A Land Use coverage in WMS has a different purpose depending on the model and/or model parameters assi ...e land use coverage for by selecting the appropriate toggle boxes in the ''Display parameters'' (lower left) section of the ''Land Use Mapping'' dialog. Para

...feature object data (the only possibility for the public domain version of WMS). The tree representation can then be used to select basins and outlet poin ...rd in the middle of the new file and save. When opening this new file into WMS, it will contain two trees that can be merged together at the appropriate l

...has been significantly updated, and the process of creating the streams in WMS has been simplified. ...low WMS to correctly generate the GSSHA channel input file. Beginning with WMS 7.0, the stream arcs no longer need to be spatially manipulated. However, t

...analysis is similar to the [[WMS:HEC-1 Parameters|HEC-1 interface]] within WMS. Some of the processes specific to Orange County are described below: * '''Open HEC-1 File''' – [[WMS:HEC-1#Reading_Existing_Files|Reads in]] existing HEC-1 files.

...']] dialog and then clicking on a ''Job Control'' related card in the text display window. .... This diagram should appear similar to the tree representation created by WMS.

Changing the preferences for the WMS interface can be done through the ''Preferences'' dialog. This dialog can b A ''Preferences'' dialog can be opened to control display and default settings/behaviors in the Project Explorer by right-clicking in

...' window provides both information and opportunities to edit properties of WMS entities. ...For example, if selecting a feature polygon representing a basin boundary, WMS will also select the associated basin in the hydrologic tree.

[[File:WMS DrawingToolsQuick.png|thumb|right|The Annotation toolbar.]] ; Select Drawing Objects : The '''Select Drawing Objects''' [[Image:WMS SelectDrawingObjectsTool.svg|15 px]] tool is used to select the previously

A flood extent coverage is created from a [[WMS:Delineate Floodplain|flood delineation dataset]] and contains polygons show ...y showing the extent of a floodplain. These coverages can be exported from WMS for reporting or use with Geographic Information Systems (GIS) to perform o

XMS (WMS, GMS, or SMS) use OpenGL for rendering graphics. OpenGL is a graphics stand ==Graphics Card and Display Issues Troubleshooting Guide==

...s a general purpose watershed modeling system. One of the main purposes of WMS is to provide a consistent interface for a variety of models and grid types ...or transient (one value per item per time step). The following objects in WMS each have a scalar dataset list:

The toolbar for the WMS [[WMS:Map Module|Map module]] has a variety of tools useful for editing and creat {{WMS Select Feature Point/Node}}

...ddition to defining a polygon using the cursor, a polygon created in the [[WMS:Map Module|Map module]] may be chosen to define a selection polygon. ...example, if a TIN is read in which has coordinate vertices in meters then WMS should be told that the project is working with metric units so that proper

...or by selecting the '''Delete''' command from the ''Edit'' menu. If the [[WMS:Edit Menu|''Confirm deletions'']] option is active, a prompt will ask to co ...g ''Vertices'' | '''Delete Duplicates''' from the ''TIN'' menu. Otherwise, WMS may abort when the vertices are triangulated. The tolerance for duplicate v