WMS:TIN Basins: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 40: Line 40:
* [[WMS:TIN Guidelines|Delineation with TINs]]
* [[WMS:TIN Guidelines|Delineation with TINs]]
* [[WMS:Delineation with DEMs|Delineation with DEMs]]
* [[WMS:Delineation with DEMs|Delineation with DEMs]]
* [[WMS:Units|Units]]
* [[WMS:Edit Menu#Units|Units]]


{{Template:WMSMain}}
{{Template:WMSMain}}
[[Category:TINs]]
[[Category:TINs]]

Revision as of 16:20, 17 May 2013

Defining Basins

The Define Basins command assigns each triangle in the TIN to a drainage basin. This is accomplished by initiating a flow path from the centroid of each triangle and "flowing" down until an outlet point is encountered. The triangle is then assigned the appropriate basin ID. The boundaries may appear rough or jagged because each triangle is assigned according to the flow from its centroid, when in fact the triangle may actually straddle basin boundaries. Boundaries may be corrected by issuing the Refine Boundaries command. The drainage basin boundaries option in the Drainage Display Options dialog is automatically set when defining basins.

Refining Boundaries

After the initial definition of drainage basins, many of the boundaries are rough or irregular. Triangles straddling true basin boundaries can be split using the Refine Boundaries command. This process is accomplished by tracing paths of maximum upward gradient along boundaries, splitting triangles when the path crosses over them, and then reassigning all affected triangles to their new basins. The process is displayed graphically.

Merging Basins

For each stream branch upstream from an outlet point, a drainage basin is automatically created. The recommended method of merging basins is to establish the outlet at a node just downstream of the junction.

However, if you need an alternative method to merge basins, there is an option to merge selected basins together using the Merge Basins command. The Merge Basins command allows you to combine the basins for a given outlet. In order to merge basins, they must be adjacent to each other and belong to the same outlet. In order to select drainage basins, the Select Drainage Basins tool must be active.

Editing Basin Variables

The Basin Variables button will let you view/edit any of the basin variables that are computed by WMS. While it is unnecessary to edit these variables, you may find some cases where you want to override what WMS has computed and use a value you have derived through a separate analysis.

Assigning Triangles to Basins

Occasionally you may wish to manually assign triangles to a basin. This is particularly important if you have a large flat area (such as a lake) within a basin and you do not wish to edit the elevations such that they would flow to the outlet. You can select the triangles you wish to assign and then choose the Assign Triangles to Basin command in order to assign the triangle to a basin. You will be prompted to select the outlet of the basin you wish to assign the selected triangles to.

Deleting NULL Basin Triangles

The Delete Null Basin Triangles command can be used to delete all triangles whose flow path does not encounter an outlet. Before defining drainage basins all triangles are classified as belonging to the null drainage basin. After defining drainage basins some triangles still belong to this null basin since they do not contribute flow through any of the given outlets. They should not be deleted if further editing is to be done. However, once all sub-basins have been properly defined, they can be deleted in order to reduce the size of the model to the region of interest.

Computing Basin Data

After defining basin boundaries, attributes such as basin areas and slope and stream lengths and slopes can be computed using the Compute Basin Data command. These are all geometric parameters used in defining basins and routing networks in HEC-1 and TR-20. If the TIN is edited or sub basin configuration changed, the drainage data must be recomputed using this command.

Once computed, they can be displayed along with the basins in the Graphics Window or written to a file using the Export File command found in the File menu. By default, basin IDs and areas are displayed after computing drainage data. The other attributes can be toggled on for display in the Basin Attributes dialog accessed from within the Drainage Display Options dialog.

Units

When the Compute Basin Data command is given the Model and Parameters Units dialog appears allowing you to specify the current Units of the model (TIN vertices) and the units you wish to use for computed parameters. TIN vertices must either be in feet or meters, but the computed areas and lengths can be given separate units. If you wish to change the units of computed parameters at a later point you must recompute the basin parameters with different selections. You may wish to convert the coordinate system prior to computing the basin data.

Related Topics: