WMS:GSSHA Feature Polygons: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(templates)
(rm related in template)
Line 19: Line 19:
===Depression Mask===
===Depression Mask===
Depression mask polygons mask cells contained within the polygon. The elevations of the cells located inside a depression mask polygon are not altered when the CleanDam program is run from WMS.
Depression mask polygons mask cells contained within the polygon. The elevations of the cells located inside a depression mask polygon are not altered when the CleanDam program is run from WMS.
==Related Topics:==
* [[WMS:GSSHA Lakes and Wetlands|GSSHA Lakes and Wetlands]]
* [[WMS:GSSHA Digital Dams|GSSHA Digital Dams]]





Revision as of 20:41, 22 March 2019

GSSHA Polygon Attributes dialog

A new feature of GSSHA 2.0 is the ability to simulate lakes and wetland areas. By attenuating and storing the incoming flow, lakes and wetlands prove to be important hydrologic features of a basin and dramatically alter the response of a watershed to a precipitation event. Both in-stream and out-of-stream lakes and wetland areas can be simulated. Lakes and wetlands are conceptually modeled in WMS as polygons in the GSSHA coverage.

GSSHA Polygon Type

Generic

Generic polygons have no attributes.

Boundary

Boundary polygons are used to define the perimeter of the watershed and are used for creating grids from an already known watershed boundary.

Lake

Lake polygons are used to define cells within a grid used to simulate lakes during a GSSHA simulation. Initial leakage discharge, spillway crest width, discharge coefficient, initial water elevation and crest elevation must be defined for each lake.

Wetland

Wetland polygons define the cells that form part of a wetland. Five parameters must be specified for each wetlands area, retention depth, hydraulic conductivity, retention depth hydraulic conductivity, maximum storage depth, and the base elevation

Figure 27. Lateral seepage flow conceptually is the flow through the subsurface peat layer. It is calculated as a darcian flow across the entire cell face. The flow through the vegetation is computed as a mixed mode flow, darcian and manning's. The flow is computed for both darcian and manning's flow and the actual flow rate varies between the two depending on the water height in relation to the plant height.

Depression Mask

Depression mask polygons mask cells contained within the polygon. The elevations of the cells located inside a depression mask polygon are not altered when the CleanDam program is run from WMS.