WMS:Orange County Unit Hydrograph: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 21: Line 21:
* '''Edit Parameters''' – Opens the [[WMS:OC Unit Hydro Design Storms|''Edit Orange County Unit Hydrograph Parameters'']] dialog.
* '''Edit Parameters''' – Opens the [[WMS:OC Unit Hydro Design Storms|''Edit Orange County Unit Hydrograph Parameters'']] dialog.
* '''Compute GIS Attributes''' – Brings up the [[WMS:Compute GIS Attributes|''Compute GIS Attributes'']] dialog.
* '''Compute GIS Attributes''' – Brings up the [[WMS:Compute GIS Attributes|''Compute GIS Attributes'']] dialog.
[[Category:WMS Menus|OC]]


==Saving a Simulation==
==Saving a Simulation==

Revision as of 17:19, 31 October 2016

Edit Orange County Unit Hydrograph Parameters dialog

Unit hydrograph analysis is used for watersheds greater than 1 square mile (640 acres) in Orange County, California. Losses are accounted for by calculating an effective precipitation. Runoff hydrographs are computed using a unit hydrograph, which is developed using an S-graph. Use a small area hydrograph instead of a full blown unit hydrograph analysis for watersheds with a Tc < 25 min. WMS creates the input files required for HEC-1 to compute hydrographs for the Orange County unit hydrograph analysis. Much of the interface for the Orange County unit hydrograph analysis is similar to the HEC-1 interface within WMS. Some of the processes specific to Orange County are described below:

OC Hydrograph Menu

The OC Hydrograph menu, available in the Hydrologic Modeling module, has the following commands:

Saving a Simulation

Save only the HEC-1 input files using the Save Simulation command in the OC Hydrograph menu. This will only save the hydrologic tree and the HEC-1 input parameters at each of the tree nodes. Terrain data, feature data, and GIS data will not be saved unless saving a WMS project file using the Save command in the File menu.

Related Topics