GMS:WEL Package

From XMS Wiki
Revision as of 20:57, 19 April 2022 by Klemon (talk | contribs)
Jump to navigationJump to search
MODFLOW
Pre-processing
MODFLOW Commands
Building a MODFLOW Model
Map to MODFLOW
Calibration
Packages Supported in GMS
Saving a MODFLOW Simulation
Importing MODFLOW Files
Unsupported MODFLOW Features
Run MODFLOW
Post-processing
MODFLOW Display Options
MODFLOW Post-Processing Viewing Options
Reading a MODFLOW Simulation
Tutorials
Packages
Flow: BCF6, HUF, LPF, UPW
Solvers:

DE4, GMG, NWT, PCG,

PCGN, LMG, SIP, SOR,

SMS
Other:

BAS6, BFH, CHD1, CLN,

DRN1, DRT1, EVT1, ETS1,

GAGE, GHB1, GNC, HFB1,

HUF, LAK3, MNW1, MNW2,

OUT1, RCH1, RIV1, SFR2,

STR1, SUB1, SWI2, WEL1,

UZF1

A set of selected cells can be specified as wells using the Point Sources/Sinks command in the MODFLOW menu or by using the conceptual model in the Map module. Wells are specified by assigning a pumping rate to a selected cell at the location of each well. Wells can be either injection wells (positive flow rate) or extraction (negative flow rate) wells.

Once a set of cells has been specified, the Well Package dialog can be used to view and edit the values assigned to the cells.

The MODFLOW Well Package dialog.

Stress Period

The Stress Period field shows the current stress period and allows users to cycle through the stress periods and view the different well properties for those stress periods in the spreadsheet below.

Use Previous

Use this option on a stress period to use the drain values from the previous stress period for the current stress period. This option is unavailable for steady state models and the first stress period of transient models.

Edit All Use Previous

This button brings up a spreadsheet which allows editing the Use Previous flag for all stress periods.

Spreadsheet

For cells where well type boundary conditions have been assigned, the well flow rate for each cell is displayed in the spreadsheet portion at the lower part of the dialog. The spreadsheet can be used to edit the well name, row, column, layer, and flow values.
For a transient simulation, the values displayed in the spreadsheet are for an individual stress period. The values associated with other stress periods can be edited by entering the number of the desired stress period in the stress period edit box in the center of the dialog. If the Use previous option is selected for a given stress period, the values from the previous stress period are used and the spreadsheet is dimmed.
The conductance factor is used with WEL parameters. When doing parameter estimation the value of well conductance assigned to a particular well boundary condition will be the value of the well parameter multiplied by the conductance factor. For more information on WEL parameters and conductance factors see the MODFLOW 2000 manual.

Edit AUX

AUTOFLOWREDUCE

IUNITAFR not specified

IUNITAFR same as list

IUNITAFR specified

Display Cell: IDs/IJK

The radio group at the bottom of the dialog allows the user to adjuster whether the cell ID or the cell i, j, k values are displayed for the cells containing the boundary condition/source/sink.

Delete All

The Delete All button deletes all of the data currently defined in the River package and restores the River package parameters to the default values.