GMS:SIP Package

From XMS Wiki
Revision as of 16:09, 22 January 2016 by Jcreer (talk | contribs) (→‎Reset)
Jump to navigationJump to search
MODFLOW
Pre-processing
MODFLOW Commands
Building a MODFLOW Model
Map to MODFLOW
Calibration
Packages Supported in GMS
Saving a MODFLOW Simulation
Importing MODFLOW Files
Unsupported MODFLOW Features
Run MODFLOW
Post-processing
MODFLOW Display Options
MODFLOW Post-Processing Viewing Options
Reading a MODFLOW Simulation
Tutorials
Packages
Flow: BCF6, HUF, LPF, UPW
Solvers:

DE4, GMG, NWT, PCG,

PCGN, LMG, SIP, SOR,

SMS
Other:

BAS6, BFH, CHD1, CLN,

DRN1, DRT1, EVT1, ETS1,

GAGE, GHB1, GNC, HFB1,

HUF, LAK3, MNW1, MNW2,

OUT1, RCH1, RIV1, SFR2,

STR1, SUB1, SWI2, WEL1,

UZF1

The SIP package is one of four solver packages for MODFLOW supported by GMS.

Maximum Iterations Per Time Step

This value is the maximum number of times through the iteration loop in one time step in an attempt solve the system of finite-difference equations.

Number of Iteration Parameters

Five variables are generally sufficient.

Acceleration Parameter

This value must be greater than zero and is usually 1.0.

Head Change Criterion For Convergence

When the maximum absolute value of head change from all cells during an iteration is less than or equal to the head change criterion, solver iteration stops.

Print Out Interval

The maximum absolute head change is printed for each iteration of a time step whenever the time step is an even multiple of the print out interval. The printout also occurs at the end of each stress period regardless of the print out interval.

Iteration Parameter Seed

These options control the seed for calculating iteration variables. Either specify the seed yourself or have MODFLOW calculate it.

Reset

This button will change all options to the default state.

The MODFLOW SIP Package dialog.