MODFLOW 6 Grid Approach Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(Created page with "This is a top level workflow. This workflow includes all of the specific workflows needed in creating a general MODFLOW project using the GMS:MODFLOW Grid Approach|grid appr...")
 
No edit summary
 
(10 intermediate revisions by 2 users not shown)
Line 1: Line 1:
This is a top level workflow. This workflow includes all of the specific workflows needed in creating a general MODFLOW project using the [[GMS:MODFLOW Grid Approach|grid approach]]. Newer and infrequent GMS users should start here.
This is a top level workflow. This workflow includes all of the specific workflows needed in creating a general [[GMS:MODFLOW 6|MODFLOW 6]] project using the grid approach. Newer and infrequent GMS users should start here.


To build a [[GMS:MODFLOW|MODFLOW]] grid approach model in GMS, use the following steps:
To build a [[GMS:MODFLOW 6|MODFLOW 6]] grid approach model in GMS, use the following steps:


{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"
Line 30: Line 30:
{|class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"
{|class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"
|-
|-
!style="text-align:left;"|4. Create a grid.
!style="text-align:left;"|4. Create a UGrid.
|-
|-
|
|
:Create either a 3D grid or a 3D UGrid by completing one of the following:
{{GMS Creating a UGrid 3D Workflow}}
<blockquote>
{{GMS Creating a Grid Workflow}}
</blockquote>
|}
|}
{|class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"
{|class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"
|-
|-
!style="text-align:left;"|5. Set up the MODFLOW simulation.
!style="text-align:left;"|5. Create a MODFLOW 6 simulation.
|-
|-
|
|
<blockquote>
{{GMS MODFLOW 6 Simulation Setup Workflow}}
{{GMS MODFLOW Simulation Setup Workflow}}
</blockquote>
|}
|}
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"
Line 52: Line 47:
|-
|-
|
|
{{GMS MODFLOW Package Parameters Setup Workflow}}
{{GMS MODFLOW 6 Package Parameters Setup Workflow}}
|}
|}
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"
|-
|-
!style="text-align:left;"|7. Run MODFLOW.
!style="text-align:left;"|7. Run MODFLOW 6 Simulation.
|-
|-
|
|
{{GMS MODFLOW Save and Run Workflow}}
{{GMS MODFLOW 6 Save and Run Workflow}}
|}
|}
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #CDB7B5; margin-bottom:0.4em;"

Latest revision as of 17:17, 28 July 2022

This is a top level workflow. This workflow includes all of the specific workflows needed in creating a general MODFLOW 6 project using the grid approach. Newer and infrequent GMS users should start here.

To build a MODFLOW 6 grid approach model in GMS, use the following steps:

1. Start GMS.
1. Start GMS, or clear existing projects in GMS.
  1. If GMS is already running, select File | New.
  2. A new project can also be started by clicking New New Macro.svg.
2. If necessary, register or update GMS.
1. Register GMS and components.
  1. Launch the GMS Registration Wizard.
  2. Follow the Registration Wizard instructions.
  3. Review the registered components in the Aquaveo License Registration dialog.
2. Update GMS.
GMS can be updated by doing any of the following:
  1. Select Download if prompted to update when starting GMS.
  2. Select Help | Check For Updates.
  3. Go directly to the GMS download page.
3. Set the display projection.
  1. Select the Edit | Units... command.
  2. In the Units dialog, set the time, mass, force, and concentration.
  3. Click the Dot dot dot button.png button and set the horizontal and vertical projection in the Display Projection dialog.
  4. If necessary, use the Horizontal Projection dialog to set a global projection.
2. Import data.
1. Gather and open image files.

Images are imported into the GIS module in GMS.

1. Open local images.
  1. Load images from local computer files using the File | Open... command.
  2. Alternatively, drag and drop the file into the Graphics Window in GMS.
2. Import images from the web.
  1. Use the Add Online Maps Add Online Maps Icon.svg macro.
  2. Select a location in the Virtual Earth Map Locator.
  3. If a projection has not been set for the project, set a new project in the Display Projection dialog.
  4. Use the Data Service Options dialog to select a web service.
2. Gather and open geometric data files.
1. Import map data.
  1. Use the File | Open... command to import map data such as Map files, boundary ID files, or boundary XY files.
  2. Alternately, drag and drop the file into the Graphics Window in GMS.
2. Import GIS data.
  1. Use the File | Open... command to import GIS data files such as Shapefiles or raster files.
  2. Alternatively, drag and drop the file into the Graphics Window in GMS.
3. Import scatter data.
  1. Use File | Open... to open files with scatter data.
    • Alternatively, drag and drop the file into the Graphics Window in GMS.
  2. Use the File Import Wizard to specify how to import the data.
4. Import CAD data.
  1. Verify the CAD file type is readable by GMS before importing it. GMS can import DXF and DWG files.
  2. Use the File | Open... command to launch the Open dialog (or drag and drop) to import the CAD files.
The data should load in layers into the Project Explorer.
5. Review and set object projections.
  1. Right-click on an object in the Project Explorer and select the Projection | Projection command.
  2. Set the horizontal and vertical projection using the Object Projection dialog.
  3. To set a global projection, use the Horizontal Projection dialog.
3. Gather hydrologic data files.
  1. Gather data files for hydrologic and hydraulic data. These include data such as hydrographs, water levels, and rating curves. They will be imported when setting boundary conditions and when doing model calibration.
3. Review and edit elevation data.
1. Review elevation data for errors.
1. Use the Dataset Info dialog.
  1. Find the "Z", "elevation" or "depth" datasets on the geometric object (mesh, TIN, grid, raster) that is being reviewed
  2. Right-click on elevation data and select Properties.
  3. Review information in the Dataset Info dialog to see that the range of values are as expected.
2. Use contour display options.
  1. Turn on Contours in the Display Options dialog and set contour options. The "Color Fill" option is recommended for this.
  2. Look for inconsistent points (points with values much higher/lower than their neighbors or regions where no data points exist).
  3. Verify that the region being modeled is covered by the elevation/depth data and there are no holes.
2. Remove erroneous points.
After reviewing the imported data, points covering regions of no data should be deleted.
1. Edit dataset values.
  1. Open the Dataset Info dialog through the dataset Properties right-click command.
  2. Open the Edit Dataset Values dialog.
2. Define active or inactive points.
  1. Open the Dataset Info dialog through the dataset Properties right-click command.
  2. Open the Active/Inactive Flags dialog.
3. Manually remove points.
  1. Use the Select Scatter Point Select Point Tool.svg tool to select erroneous points.
  2. Review and edit point data in the XYZF Bar.
  3. Delete erroneous points.
3. Merge elevation datasets.
  1. Using the Select Scatter Point Set Select Scatter Set Tool.svg tool, select multiple scatter point sets in the Graphics Window.
  2. Select the Scatter Points | Merge Scatter Point Sets command.
  3. In the Scatter Point Set Name dialog assign a name to the new scatter set.
4. Create a UGrid.
Create a 3D UGrid in one of the following ways:
1. Create a 3D UGrid from scratch.
  1. Right-click in the Project Explorer and select New | UGrid 3D....
  2. In the New UGrid dialog, enter the information for the X-, Y-, and Z-Dimension of the grid.
2. Create a 3D UGrid from a coverage.
  1. Right-click on the desired coverage and select the Map To | UGrid command.
  2. In the Map → UGrid dialog, set the Dimension drop-down to "3D".
  3. Enter the rest of the information for the grid, including the X-, Y-, and Z-Dimension information.
5. Create a MODFLOW 6 simulation.
  1. Right-click in the Project Explorer and select the New Simulation | MODFLOW 6 command.
  2. In the New MODFLOW 6 Simulation dialog, select the UGrid to use and any optional packages.
6. Set up package parameters.
  1. Set up global and output package parameters: TDIS, IMS, DIS, IC, OC.
  2. Set up flow package parameters: NPF, HFB, GNC.
  3. Set up optional package parameters, including boundary conditions such as: CHD, GHB, RIV, SFR, etc.
7. Run MODFLOW 6 Simulation.
  1. In the Project Explorer, right-click on the MODFLOW 6 simulation and Save Simulation and Run.
  2. The Simulation Run Queue dialog will appear; allow the simulation to run to completion.
  3. When the simulation has finished successfully, click Load Solution.
8. Visualize the Solution.
1. Change display options.
1. Set display options.
  1. Open the Display Options Display Options Macro.svg dialog.
  2. Set the general display options.
  3. Set general lighting options.
  4. Set display options for each module that is being used.
  5. Set contour options.
  6. Set vector options.
2. View display.
  1. Use the Rotate Rotate Tool.svg, Pan Pan Tool.svg, and Zoom Zoom Tool Icon.svg tools.
  2. Use the View menu commands found in the Display menu.
  3. Use the Frame Frame Macro.svg command to center and resize the display as needed.
3. Adjust display.
Display may need to be adjusted during the remainder of the project.
  1. Use the Display Options dialog and viewing tools as needed.
  2. Use the Frame Frame Macro.svg command to center and resize the display as needed.
2. Change contour options.
  1. Turn on Contours in the Display Options dialog and set contour options. The "Color Fill" option is recommended for this.
  2. Look for inconsistent points (points with values much higher/lower than their neighbors or regions where no data points exist).
  3. Verify that the region being modeled is covered by the elevation/depth data and there are no holes.
3. Create a plot.
1. Start the plot wizard.
  1. Select the Display | Plot Wizard menu command.
2. Select available plot type.
1. Computed vs. Observed Data plots.
1. Computed vs. Observed Data.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Computed vs. Observed Data" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
2. Computed vs. Observed Data (Weighted).
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Computed vs. Observed Data (Weighted)" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
2. Residual vs. Observed Data plots.
1. Residual vs. Observed Data.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Residual vs. Observed" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
2. Residual vs. Observed Data (Weighted).
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Residual vs. Observed (Weighted)" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
3. Parameter Sensitivity plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Parameter Sensitivity" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
4. Error vs. Simulation plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Error vs. Simulation" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
5. Error vs. Time Step plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Error vs. Time Step" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
6. Error Summary plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Error Summary" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
7. Time Series plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Time Series" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
8. Active Dataset Time Series plot.
  1. Select a dataset in Project Explorer.
  2. Select cells in the project.
  3. Select Display | Plot Wizard to start the Plot Wizard.
  4. Select the "Active Dataset Time Series" option on the left and click Next.
  5. Specify plot options in step 2 of the Plot Wizard then click Finish.
  6. Review plot window.
9. S/S Flow vs. Time plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "S/S Flow vs. Time" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
10. Flow Budget vs. Time plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Flow Budget vs. Time" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
11. Gage Package Value vs. Time plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Gage Package Value vs. Time" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
4. Create an animation.
  1. Select a solution dataset and use the Display | Animate menu command.
  2. Use the Animation Wizard to specify the animation parameters.
  3. Save and view the animation file.
5. Review the zone and flow budgets.
  1. Select MODFLOW | Flow Budget....
  2. Review the flow data on the Cells and Zones tabs in the Flow Budget dialog.
  3. Generate water budget data on the USGS ZONEBUDGET tab.