WMS:2D Grid Tools: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 24: Line 24:
==[[Image:WMSIcon_Create_Gages.png]]The Create Gages Tool==
==[[Image:WMSIcon_Create_Gages.png]]The Create Gages Tool==


The '''Create Gages''' tool is used to interactively create gages in the ''Graphics Window''. When this tool is active, a new gage is created by clicking in the ''Graphics Window'' at the desired location of the gage (the ''Graphics Window'' must be in plan view when creating gages). The xy coordinates of the gage are defined by the cursor position and you are prompted for the z coordinate. The x, y, and z coordinates of a new gage can be edited using the ''dit Window.'' In addition, once a gage has been defined with the '''Create Gages''' tool, the gage can be edited using the [[WMS:Gages#Gages Dialog|Gages dialog]].
The '''Create Gages''' tool is used to interactively create gages in the ''Graphics Window''. When this tool is active, a new gage is created by clicking in the ''Graphics Window'' at the desired location of the gage (the ''Graphics Window'' must be in plan view when creating gages). The xy coordinates of the gage are defined by the cursor position and the user will be prompted for the z coordinate. The x, y, and z coordinates of a new gage can be edited using the ''dit Window.'' In addition, once a gage has been defined with the '''Create Gages''' tool, the gage can be edited using the [[WMS:Gages#Gages Dialog|Gages dialog]].


==[[Image:WMSIcon_Select_Gages.png]]The Select Gages Tool==
==[[Image:WMSIcon_Select_Gages.png]]The Select Gages Tool==

Revision as of 14:44, 2 September 2014

The following tools are contained in the dynamic portion of the Tool Palette when the 2D Grid module is active.

WMSIcon Select Cell.png Select Cell

The Select Cell tool is used to select individual grid cells or grid nodes. Multi-selection can be performed by holding down the SHIFT key while selecting or by dragging a rectangle to enclose the cells to be selected. The ij indices of the selected cell are displayed in the Edit Window.

If the grid is cell-centered, selected cells are highlighted by drawing small circles around the cell centers. If the grid is mesh-centered, the grid nodes (corners) are selected, and the circles are drawn around the grid nodes.

Only visible cells can be selected. Cells which have been hidden cannot be selected. Inactive cells can only be selected when they are being displayed by turning on the Inactive Cells item in the Display Options dialog (see section below on active/inactive cells).

File:WMSIcon Select i.pngSelect i

The Select i tool is used to select an entire "row" (set of cells with the same i index) of cells at once. Multi-selection can be performed by holding down the SHIFT key. The i index of the selected row is displayed in the Edit Window.

File:WMSIcon Select j.pngSelect j

The Select j tool is used to select an entire "column" (set of cells with the same j index) of cells at once. Multi-selection can be performed by holding down the SHIFT key. The j index of the selected column is displayed in the Edit Window.

WMSIcon Contour Labels.pngContour Labels

The Contour Label tool manually places numerical contour elevation labels at points clicked on with the mouse. These labels remain on the screen until the contour options are changed, until they are deleted using the Contour Labels dialog, or until the grid is edited in any way. Contour labels can be deleted with this tool by holding down the SHIFT key while clicking on the labels. This tool can only be used in plan view.

WMSIcon Create Gages.pngThe Create Gages Tool

The Create Gages tool is used to interactively create gages in the Graphics Window. When this tool is active, a new gage is created by clicking in the Graphics Window at the desired location of the gage (the Graphics Window must be in plan view when creating gages). The xy coordinates of the gage are defined by the cursor position and the user will be prompted for the z coordinate. The x, y, and z coordinates of a new gage can be edited using the dit Window. In addition, once a gage has been defined with the Create Gages tool, the gage can be edited using the Gages dialog.

WMSIcon Select Gages.pngThe Select Gages Tool

The Select Gages tool is used to select previously defined gages. A set of selected gages can be deleted by hitting the DELETE key or by selecting the Delete command from the Edit menu. The coordinates of a selected gage can be edited using the Edit Window. The location of a gage can also be edited by holding down the mouse button when a gage is selected and dragging the gage. This tool is also used to control what is plotted in the Gage Plot Window. Only the curves associated with selected gages are plotted.

WMSIcon Select Hydrograph.pngThe Select Hydrograph Tool

The Select Hydrograph Tool allows theuser to select hydrograph icons that appear at specified locations after completing a GSSHA solution. By double-clicking on the icon a hydrograph plot window will be created (or the user can select the hydrograph and choose the New Hydrograph Plot option from the Display menu).

Related Topics