The CMS-Flow graphical interface includes tools to assist with creating, editing, and debugging a CMS-Flow model. The CMS-Flow interface exists as a simulation. The simulation requires components in the Quadtree module and the Map module.
The interface consists of a right-click CMS-Flow simulation menu and CMS-Flow coverage righ-click menus with model specific commands and visualization tools for setting up a simulation and analyzing the datasets computed by the model.
CMS-Flow Simulation Right-Click Menu
The simulation right-click menu includes the general simulation commands Delete, Duplicate, and Rename along with the following model specific commands:
- Model Control
- Brings up the CMS-Flow Model Control dialog. The dialog allows viewing and editing the current parameters that affect how CMS-Flow runs and what options are to be included in the current simulation.
- Model Check
- The CMS-Flow Model Check performs a number of checks on the simulation to ensure a valid model.
- Export CMS-Flow
- Tells SMS that it is time to write out the files that CMS-Flow needs to run. Note that the project must be saved before the files may be exported. The user will not see anything happen, but SMS uses the input information from the model control, the boundary conditions, and quadtree data to create the files in preparation for CMS-Flow to work.
- Launch CMS-Flow
- When the model is ready and has been exported, it may be launched. Launching CMS-Flow initiates the model run for the simulation. Upon successful completion of the launch, the analysis is complete and results are ready to be read and displayed by SMS.
- Save, Export, and Launch CMS-Flow
- This is a combination of the previous steps put together into one.
Boundary Condition Coverage Right-Click Menu
When clicking on the CMS-Flow boundary condition coverage in the Project Explorer, the coverage has the standard coverage menu. After creating feature arcs in the coverage, the Select Feature Arcs tool can be used to bring up a right-click menu. This menu has the following additional command when the CMS-Flow boundary condition coverage is active.
- Assign Boundary Conditions
- Brings up the CMS-Flow Arc Buondary Conditions dialog where boundary condition parameters can be assigned to the selected arc.
Save Points Coverage Right-Click Menu
The CMS-Flow save points coverage has additional right-click menu commands for both the coverage and for feature points created in the coverage.
Right-clicking on the save points coverage in the Project Explorer has the following additional menu command:
- Brings up the Save Points Properties dialog where the data type that will be collected in during the model run can be specified.
- Assign Save Points
- Brings up the Assign Save Points dialog where the type of data the feature point will gather can be specified.
SMS Menu Bars
|Standard Menus:||File • Edit • Display • Window • Help|
|Module Menus:||2D Mesh • Cartesian Grid • Curvilinear Grid • GIS • Map • Particle • Quadtree • Raster • Scatter|
|Model Menus:||ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • FESWMS • Generic Model • GenCade • PTM • RMA2 • RMA4 • SRH-2D • STWAVE • TUFLOW|
SMS – Surface-water Modeling System
|Modules:||1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid|
|General Models:||3D Structure • FVCOM • Generic • PTM|
|Coastal Models:||ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM|
|Riverine/Estuarine Models:||AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV|
|Aquaveo • SMS Tutorials • SMS Workflows|