SMS:TUFLOW Menu: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 3: Line 3:
* '''Cell Attributes'''
* '''Cell Attributes'''
[[Image:TUFLOW Cell Attributes.jpg|thumb|275 px|TUFLOW ''Cell Attributes'' dialog]]
[[Image:TUFLOW Cell Attributes.jpg|thumb|275 px|TUFLOW ''Cell Attributes'' dialog]]
*:This command is enabled when one or more cells on a TUFLOW grid are selected. The attributes that can be set using this command are the cell code and the option to override the global initial water level (set in the 2D Model Control). The cell code (water cell, inactive cell – in mesh, inactive cell – not in mesh) for the selected cells will only be used if ''Specify cell by cell'' is selected in ''Cell codes'' section of the [[SMS:TUFLOW Grid Options|''TUFLOW Grid Options'']] dialog.
<blockquote>This command is enabled when one or more cells on a TUFLOW grid are selected. The attributes that can be set using this command are the cell code and the option to override the global initial water level (set in the 2D Model Control). The cell code (water cell, inactive cell &ndash; in mesh, inactive cell &ndash; not in mesh) for the selected cells will only be used if ''Specify cell by cell'' is selected in ''Cell codes'' section of the [[SMS:TUFLOW Grid Options|''TUFLOW Grid Options'']] dialog. </blockquote>
*'''Assign Material Type'''
*'''Assign Material Type'''
*:This command is enabled when one or more cells on a TUFLOW grid are selected. The command will open the ''Materials Data'' dialog. The ''Materials Data'' dialog will allow the user to select a material to assign to a cell. The material set for the cell will only be used if ''Specify cell by cell'' is selected in the ''Materials'' section of the [[SMS:TUFLOW Grid Options|''TUFLOW Grid Options'']] dialog.
<blockquote>This command is enabled when one or more cells on a TUFLOW grid are selected. The command will open the ''Materials Data'' dialog. The ''Materials Data'' dialog will allow the user to select a material to assign to a cell. The material set for the cell will only be used if ''Specify cell by cell'' is selected in the ''Materials'' section of the [[SMS:TUFLOW Grid Options|''TUFLOW Grid Options'']] dialog.</blockquote>


The following menu commands are available in the ''TUFLOW Simulation'' Menu:         
The following menu commands are available in the ''TUFLOW Simulation'' Menu:         
                                      
                                      
* '''Delete'''
* '''Delete'''
*: This command will delete the TUFLOW simulation.
<blockquote> This command will delete the TUFLOW simulation. </blockquote>
* '''Duplicate'''
* '''Duplicate'''
*: This command will create another copy of the simulation.
<blockquote> This command will create another copy of the simulation. </blockquote>
*'''Rename'''
*'''Rename'''
*: This command will allow you to rename the simulation.
<blockquote> This command will allow you to rename the simulation. </blockquote>
* '''Export TUFLOW files'''
* '''Export TUFLOW files'''
*: SMS will save the TUFLOW input files in the TUFLOW directory for that simulation. If one does not already exist, the user will be prompted to select a location.
<blockquote> SMS will save the TUFLOW input files in the TUFLOW directory for that simulation. If one does not already exist, the user will be prompted to select a location. </blockquote>
* '''Launch TUFLOW'''
* '''Launch TUFLOW'''
*: SMS will launch TUFLOW using input files that have previously been exported.
<blockquote> SMS will launch TUFLOW using input files that have previously been exported. </blockquote>
* '''Save Project, Export and Launch TUFLOW'''
* '''Save Project, Export and Launch TUFLOW'''
*: SMS will save the project, write out the TUFLOW input files, and launch TUFLOW.
<blockquote> SMS will save the project, write out the TUFLOW input files, and launch TUFLOW. </blockquote>
* '''2D Model Control'''
* '''2D Model Control'''
*: This command will bring up the ''2D Model Control'' dialog where various model parameters are set.  See [[SMS:TUFLOW Model Parameters#Model Control|''TUFLOW 2D Model Control]]'' page.
<blockquote> This command will bring up the ''2D Model Control'' dialog where various model parameters are set.  See [[SMS:TUFLOW Model Parameters#Model Control|''TUFLOW 2D Model Control]]'' page. </blockquote>
* '''1D Control'''
* '''1D Control'''
*: This command will bring up the ''Control 1D'' dialog where various model parameters are set. See [[SMS:TUFLOW Model Parameters#Model Control|''Model Parameters]]'' page.
<blockquote> This command will bring up the ''Control 1D'' dialog where various model parameters are set. See [[SMS:TUFLOW Model Parameters#Model Control|''Model Parameters]]'' page. </blockquote>
* '''Model Check'''
* '''Model Check'''
*: This command will cause SMS to perform a check for invalid settings that could prevent TUFLOW from running properly. If errors are found, they will be reported in the  ''Model Check'' dialog with information on how to correct them.
<blockquote> This command will cause SMS to perform a check for invalid settings that could prevent TUFLOW from running properly. If errors are found, they will be reported in the  ''Model Check'' dialog with information on how to correct them. </blockquote>


==Related Topics==
==Related Topics==

Revision as of 20:22, 11 December 2013

The following menu commands are available in the TUFLOW Menu:

  • Cell Attributes
File:TUFLOW Cell Attributes.jpg
TUFLOW Cell Attributes dialog

This command is enabled when one or more cells on a TUFLOW grid are selected. The attributes that can be set using this command are the cell code and the option to override the global initial water level (set in the 2D Model Control). The cell code (water cell, inactive cell – in mesh, inactive cell – not in mesh) for the selected cells will only be used if Specify cell by cell is selected in Cell codes section of the TUFLOW Grid Options dialog.

  • Assign Material Type

This command is enabled when one or more cells on a TUFLOW grid are selected. The command will open the Materials Data dialog. The Materials Data dialog will allow the user to select a material to assign to a cell. The material set for the cell will only be used if Specify cell by cell is selected in the Materials section of the TUFLOW Grid Options dialog.

The following menu commands are available in the TUFLOW Simulation Menu:

  • Delete

This command will delete the TUFLOW simulation.

  • Duplicate

This command will create another copy of the simulation.

  • Rename

This command will allow you to rename the simulation.

  • Export TUFLOW files

SMS will save the TUFLOW input files in the TUFLOW directory for that simulation. If one does not already exist, the user will be prompted to select a location.

  • Launch TUFLOW

SMS will launch TUFLOW using input files that have previously been exported.

  • Save Project, Export and Launch TUFLOW

SMS will save the project, write out the TUFLOW input files, and launch TUFLOW.

  • 2D Model Control

This command will bring up the 2D Model Control dialog where various model parameters are set. See TUFLOW 2D Model Control page.

  • 1D Control

This command will bring up the Control 1D dialog where various model parameters are set. See Model Parameters page.

  • Model Check

This command will cause SMS to perform a check for invalid settings that could prevent TUFLOW from running properly. If errors are found, they will be reported in the Model Check dialog with information on how to correct them.

Related Topics