GMS:CLN Process: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 22: Line 22:
==CLN Process Dialog==
==CLN Process Dialog==


The CLN process values can be edited in the ''CLN Process'' dialog. The dialog contains tables that can be accessed by selecting a table from the list at the left of the dialog.
The CLN process values can be edited in the ''CLN Process'' dialog reached through the ''MODLFOW'' | ''Optional Packages'' | '''CLN – Connected Linear Network''' menu command. The dialog contains tables that can be accessed by selecting a table from the list at the left of the dialog.
*ClnText
*ClnText
*SegmentNodes – The CLN process contains nodes that can be connected together. Each connected nodes have a unique ''ClnSegmentId'', and each node has a unique ''IFNO'' value.  
*SegmentNodes – The CLN process contains nodes that can be connected together. Each connected nodes have a unique ''ClnSegmentId'', and each node has a unique ''IFNO'' value.  

Revision as of 16:17, 13 January 2017

MODFLOW
Pre-processing
MODFLOW Commands
Building a MODFLOW Model
Map to MODFLOW
Calibration
Packages Supported in GMS
Saving a MODFLOW Simulation
Importing MODFLOW Files
Unsupported MODFLOW Features
Run MODFLOW
Post-processing
MODFLOW Display Options
MODFLOW Post-Processing Viewing Options
Reading a MODFLOW Simulation
Tutorials
Packages
Flow: BCF6, HUF, LPF, UPW
Solvers:

DE4, GMG, NWT, PCG,

PCGN, LMG, SIP, SOR,

SMS
Other:

BAS6, BFH, CHD1, CLN,

DRN1, DRT1, EVT1, ETS1,

GAGE, GHB1, GNC, HFB1,

HUF, LAK3, MNW1, MNW2,

OUT1, RCH1, RIV1, SFR2,

STR1, SUB1, SWI2, WEL1,

UZF1

The Connected Linear Network (CLN) Process was developed for MODFLOW-USG to model one dimensional connected features that are much smaller than a groundwater flow model's cells.[1] The CLN Process can be used to replace multi-cell wells that would use the MNW1 or MNW2 package in other versions of MODFLOW.

Conceptual Model

A CLN well can be added to a conceptual model by creating a point using the "Wells (CLN)" type. The geometry of the well screen can be set using the Use screen attribute for a single vertical screen. Otherwise, the generated well nodes include the grid layers specified for the coverage by its default layer range. For transient models, the CLN well node IBOUND values are disabled until the first stress period with a non-zero flow rate.

CLN Process Dialog

The CLN process values can be edited in the CLN Process dialog reached through the MODLFOW | Optional Packages | CLN – Connected Linear Network menu command. The dialog contains tables that can be accessed by selecting a table from the list at the left of the dialog.

  • ClnText
  • SegmentNodes – The CLN process contains nodes that can be connected together. Each connected nodes have a unique ClnSegmentId, and each node has a unique IFNO value.
  • JAConnections – Allows editing the connectivity of nodes similar to the SegmentNodes table.
  • Nodes – This table allows data for CLN nodes to be edited and viewed including the starting head and IBOUND values for each node.
  • GwConnections – This table shows the connections between the CLN process and nodes and the groundwater process cells. The IGWNOD column contains the cell ID of the connected groundwater node.
  • ConduitTypes – This table shows the conduit types generated for each CLN node and the associated mapped values for FRAD and CONDUITK previously entered in the Map module.
  • UnitNumbers
  • TransientIBOUND – Edits changing IBOUND values in transient models. This table can be edited when cells become active and inactive.

A detailed description of CLN process input is available with the MODFLOW-USG documentation available at the USGS MODFLOW-USG website.

MODFLOW CLN Process dialog showing the Nodes options

CLN Wells Dialog

The MODFLOW CLN Wells Package is similar to the WEL Package dialog. It allows CLN well flow rates to be viewed and edited, and CLN wells can also be deleted. The Cell ID table column is the CLN Process node ID of the well.

The MODFLOW CLN Wells Package dialog

Notes