SMS:2D Mesh Elements Menu: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 33: Line 33:
|Generation command – triangulates the selected nodes to form triangle elements.
|Generation command – triangulates the selected nodes to form triangle elements.
|-
|-
|align="center"|[[SMS:Optimize_Triangulation_(Data_Menu)|Optimize Triangulation]]  
|align="center"|[[SMS:Mesh Node Triangulation|Optimize Triangulation]]  
|Generation command – swaps edges of triangular elements to meet the Dulanay criterion.
|Generation command – swaps edges of triangular elements to meet the Dulanay criterion.
|-
|-

Revision as of 19:03, 17 December 2012

The Elements Menu includes the following commands:

Command Description
Options General command – set up the default element options.
Select Thin Triangles General command – selects all thin triangular element that meet the definition specified in the options command.
Find General command – finds the element with a specified ID or location.
Assign Material Type General command – requires a selected element. Sets the material type of the selected elements based on the option defined in the options command.
Merge Triangles Conversion command – merges triangle pairs that meet the standard for rectangles defined in the options command. Can operate on selected elements.
Split Quadrilaterals Conversion command – splits quadrilateral elements into two triangular elements. Can operate on selected elements.
QUAD8 ↔ QUAD9 Conversion command – converts all QUAD8 to QUAD9 elements and vice versa. Only applies to the FESWMS model. Can operate on selected elements.
Linear ↔ Quadratic Conversion command – converts all elements from linear to quad or vice versa. Only applies to TABS and FESWMS models.
Triangulate Generation command – triangulates the selected nodes to form triangle elements.
Optimize Triangulation Generation command – swaps edges of triangular elements to meet the Dulanay criterion.
Refine Generation command – splits all selected elements into four elements.
Relax Generation command – moves all the nodes on the interior of the selected elements to the centroid of their contributing area. Iterates based on option set in the options command.
Fix Bad Area Transitions Generation command – removes nodes that cause bad area transitions as defined in the element quality control.
Rectangular Patch Patch command – creates elements from four selected node strings.
Triangular Patch Patch command – creates elements from three selected node strings.


Related Topics