SMS:FESWMS Menu: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 1: Line 1:
The following menu commands are available in the [[SMS:FESWMS|FESWMS]] Menu:
The following menu commands are available in the [[SMS:FESWMS|FESWMS]] Menu:
; '''Assign BC''' : (Boundary Condition) Opens either the [[SMS:FESWMS BC Nodestrings|''FESWMS Nodestring Boundary Conditions'']] dialog or the ''FESWMS Nodal Boundary  Conditions'' dialog. A node or nodestring must be selected for this command to be available.
 
; '''Local Parameters''' : Brings up the ''FESWMS Local Parameters'' dialog. Requires that a node be selected.
'''Assign BC'''  
; '''Initial Conditions''' : Brings up the ''Initial Conditions Data'' dialog.
<blockquote style="margin-top:0px; margin-bottom:0px;">
; [[SMS:FESWMS_Hydraulic_Structures#Weir|'''Weir''']] : Opens the ''FESWMS Weir'' dialog. Requires a selected nodestring be active.
(Boundary Condition) Opens either the [[SMS:FESWMS BC Nodestrings|''FESWMS Nodestring Boundary Conditions'']] dialog or the ''FESWMS Nodal Boundary  Conditions'' dialog. A node or nodestring must be selected for this command to be available.
; [[SMS:FESWMS_Hydraulic_Structures#Culvert|'''Culvert''']] : Brings up the ''FESWMS Culvert'' dialog. Requires that the inlet and outlet nodes are currently selected.
</blockquote>
; [[SMS:FESWMS_Hydraulic_Structures#Drop-Inlet_Spillways|'''Drop Inlet''']] : Brings up the ''Drop Inlet Definition'' dialog. Requires that a node is currently selected.
'''Local Parameters'''  
; [[SMS:FESWMS_Hydraulic_Structures#Channel Link|'''Channel Link''']] : Brings ups the ''FESWMS Channel Link'' dialog.
<blockquote style="margin-top:0px; margin-bottom:0px;">
; [[SMS:FESWMS_Hydraulic_Structures#Gate|'''Gate''']] : Opens the ''FESWMS Gate'' dialog.
Brings up the ''FESWMS Local Parameters'' dialog. Requires that a node be selected.
; [[SMS:FESWMS_Hydraulic_Structures#Piers|'''Pier''']] : Brings ups the ''FESWMS Pier Definition'' dialog.
</blockquote>
; '''FLUX String''' : Option to set currently selected nodestring to Total Flow string.
'''Initial Conditions'''  
; [[SMS:FESWMS Material Properties|'''Material Properties''']] : Opens the ''FESWMS Material Properties'' dialog. This dialog is different than the general ''Material Properties'' dialog in SMS.
<blockquote style="margin-top:0px; margin-bottom:0px;">
; [[SMS:Model Checker|'''Model Check''']] : Runs the model check. If there are errors, then the ''Model Check'' dialog will appear.
Brings up the ''Initial Conditions Data'' dialog.
; [[SMS:FESWMS_Model_Control_Dialog|'''Model Control''']] : Brings up the ''FESWMS Model Control'' dialog.
</blockquote>
; '''Run FST2DH''' : Starts the FST2DH model wrapper.
[[SMS:FESWMS_Hydraulic_Structures#Weir|'''Weir''']]  
<blockquote style="margin-top:0px; margin-bottom:0px;">
Opens the ''FESWMS Weir'' dialog. Requires a selected nodestring be active.
</blockquote>
[[SMS:FESWMS_Hydraulic_Structures#Culvert|'''Culvert''']]  
<blockquote style="margin-top:0px; margin-bottom:0px;">
Brings up the ''FESWMS Culvert'' dialog. Requires that the inlet and outlet nodes are currently selected.
</blockquote>
[[SMS:FESWMS_Hydraulic_Structures#Drop-Inlet_Spillways|'''Drop Inlet''']]  
<blockquote style="margin-top:0px; margin-bottom:0px;">
Brings up the ''Drop Inlet Definition'' dialog. Requires that a node is currently selected.
</blockquote>
[[SMS:FESWMS_Hydraulic_Structures#Channel Link|'''Channel Link''']]  
<blockquote style="margin-top:0px; margin-bottom:0px;">
Brings ups the ''FESWMS Channel Link'' dialog.
</blockquote>
[[SMS:FESWMS_Hydraulic_Structures#Gate|'''Gate''']]  
<blockquote style="margin-top:0px; margin-bottom:0px;">
Opens the ''FESWMS Gate'' dialog.
</blockquote>
[[SMS:FESWMS_Hydraulic_Structures#Piers|'''Pier''']]  
<blockquote style="margin-top:0px; margin-bottom:0px;">
Brings ups the ''FESWMS Pier Definition'' dialog.
</blockquote>
'''FLUX String'''  
<blockquote style="margin-top:0px; margin-bottom:0px;">
Option to set currently selected nodestring to Total Flow string.
</blockquote>
[[SMS:FESWMS Material Properties|'''Material Properties''']]  
<blockquote style="margin-top:0px; margin-bottom:0px;">
Opens the ''FESWMS Material Properties'' dialog. This dialog is different than the general ''Material Properties'' dialog in SMS.
</blockquote>
[[SMS:Model Checker|'''Model Check''']]  
<blockquote style="margin-top:0px; margin-bottom:0px;">
Runs the model check. If there are errors, then the ''Model Check'' dialog will appear.
</blockquote>
[[SMS:FESWMS_Model_Control_Dialog|'''Model Control''']]  
<blockquote style="margin-top:0px; margin-bottom:0px;">
Brings up the ''FESWMS Model Control'' dialog.
</blockquote>
'''Run FST2DH'''  
<blockquote style="margin-top:0px; margin-bottom:0px;">
Starts the FST2DH model wrapper.
</blockquote>


== Local Parameters Dialog==
== Local Parameters Dialog==

Revision as of 16:45, 30 September 2016

The following menu commands are available in the FESWMS Menu:

Assign BC

(Boundary Condition) Opens either the FESWMS Nodestring Boundary Conditions dialog or the FESWMS Nodal Boundary Conditions dialog. A node or nodestring must be selected for this command to be available.

Local Parameters

Brings up the FESWMS Local Parameters dialog. Requires that a node be selected.

Initial Conditions

Brings up the Initial Conditions Data dialog.

Weir

Opens the FESWMS Weir dialog. Requires a selected nodestring be active.

Culvert

Brings up the FESWMS Culvert dialog. Requires that the inlet and outlet nodes are currently selected.

Drop Inlet

Brings up the Drop Inlet Definition dialog. Requires that a node is currently selected.

Channel Link

Brings ups the FESWMS Channel Link dialog.

Gate

Opens the FESWMS Gate dialog.

Pier

Brings ups the FESWMS Pier Definition dialog.

FLUX String

Option to set currently selected nodestring to Total Flow string.

Material Properties

Opens the FESWMS Material Properties dialog. This dialog is different than the general Material Properties dialog in SMS.

Model Check

Runs the model check. If there are errors, then the Model Check dialog will appear.

Model Control

Brings up the FESWMS Model Control dialog.

Run FST2DH

Starts the FST2DH model wrapper.

Local Parameters Dialog

Available when a node is selected. Allows setting Ceiling Options or Sediment Options for the selected node.

FESWMS Local Parameters dialog
FESWMS Ceiling dialog

Initial Conditions Dialog

Initial Conditions Data dialog

This dialog allowed writing out a FESWMS initial conditions (*.ini) file.

File Name – This section has an option for saving out an initial conditions (*.ini) file. The initial time step can also be set.

Velocity

  • Constant – Allows setting a constant initial water surface elevation.
  • Dataset – Using the Select button brings up Select Dataset dialog where velocity dataset can be designated.

Water Surface Elevation

  • Constant – Allows setting a constant initial water surface elevation.
  • Dataset – Using the Select button brings up Select Dataset dialog where velocity dataset can be designated.

Run FST2DH

This command will first run the Model Checker which will search for errors in the model set up. If found, the Model Checker dialog will display the errors found and give recommendation on how to fix the errors.

If there are no errors, or SMS is told to ignore the errors, the FESWMS model wrapper will start. The model wrapper will display the progress of the model run. Clicking the Abort button will end the model run. Once the model run has finished, the Abort button will change to an Exit button. Selecting the Load solution option will open the solution file in SMS when the Exit button is clicked.

Related Topics