SMS:FESWMS Menu: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 1: Line 1:
The following menu commands are available in the [[SMS:FESWMS|FESWMS]] Menu:
The following menu commands are available in the [[SMS:FESWMS|FESWMS]] Menu:
* '''Assign BC''' (Boundary Condition) – will bring up the ''FESWMS Nodestring Boundary Conditions'' dialog or ''FESWMS Nodal Boundary Conditions'' dialog. A node or nodestring must be selected for this command to be available.
* '''Assign BC''' (Boundary Condition) – will bring up the ''FESWMS Nodestring Boundary Conditions'' dialog or ''FESWMS Nodal Boundary Conditions'' dialog. A node or nodestring must be selected for this command to be available.
* '''Local Parameters''' – brings up the ''FESWMS Local Parameters'' dialog.  
* '''Local Parameters''' – brings up the ''FESWMS Local Parameters'' dialog. Requires that a node be selected.
* '''Initial Conditions'''
* '''Initial Conditions'''
* [[SMS:FESWMS_Hydraulic_Structures#Weir|Weir]]
* [[SMS:FESWMS_Hydraulic_Structures#Weir|Weir]]

Revision as of 16:20, 15 June 2015

The following menu commands are available in the FESWMS Menu:

  • Assign BC (Boundary Condition) – will bring up the FESWMS Nodestring Boundary Conditions dialog or FESWMS Nodal Boundary Conditions dialog. A node or nodestring must be selected for this command to be available.
  • Local Parameters – brings up the FESWMS Local Parameters dialog. Requires that a node be selected.
  • Initial Conditions
  • Weir
  • Culvert
  • Drop Inlet
  • Channel Link
  • Gate
  • Pier
  • FLUX String
  • Material Properties
  • Model Check
  • Model Control
  • Run FST2DH

Boundary Conditions

Boundary Conditions Dialogs

FESWMS Nodestring Boundary Conditions dialog
FESWMS Local Parameters dialog
Initial Conditions Data dialog

Hydraulic Structures

FLUX String

Run FST2DH

Related Topics