SMS:FESWMS Menu

From XMS Wiki
Jump to navigationJump to search

The following menu commands are available in the FESWMS Menu:

  • Assign BC (Boundary Condition) – opens either the FESWMS Nodestring Boundary Conditions dialog or the FESWMS Nodal Boundary Conditions dialog. A node or nodestring must be selected for this command to be available.
  • Local Parameters – brings up the FESWMS Local Parameters dialog. Requires that a node be selected.
  • Initial Conditions – brings up the Initial Conditions Data dialog.
  • Weir – opens the FESWMS Weir dialog. Requires a selected nodestring be active.
  • Culvert – brings up the FESWMS Culvert dialog. Requires that the inlet and outlet nodes are currently selected.
  • Drop Inlet – brings up the Drop Inlet Definition dialog. Requires that a node is currently selected.
  • Channel Link – brings ups the FESWMS Channel Link dialog.
  • Gate – opens the FESWMS Gate dialog.
  • Pier – brings ups the FESWMS Pier Definition dialog.
  • FLUX String – option to set currently selected nodestring to Total Flow string.
  • Material Properties – opens the FESWMS Material Properties dialog. This dialog is different than the general Material Properties dialog in SMS.
  • Model Check – runs the model check. If there are errors, then the Model Check dialog will appear.
  • Model Control – brings up the FESWMS Model Control dialog.
  • Run FST2DH

Local Parameters Dialog

FESWMS Local Parameters dialog

Initial Conditions Dialog

Initial Conditions Data dialog

Run FST2DH

Related Topics