|
|
(2 intermediate revisions by the same user not shown) |
Line 58: |
Line 58: |
| |- | | |- |
| | | | | |
| :# Using the '''Select Cells''' tool, select cells to use as monitoring stations. | | :# Using the [[SMS:Cartesian Grid Tools#Select Cell|'''Select Cell''']] [[File:SMS Select Cell Cell Tool.svg|16 px]] tool, select cells to use as monitoring stations. |
| :# Select the [[SMS:CMS-Wave Menu|''CMS-Wave'' | '''Assign Cell Attributes''']] menu command. | | :# Select the [[SMS:CMS-Wave Menu|''CMS-Wave'' | '''Assign Cell Attributes''']] menu command. |
| :# Assign cell as a monitoring station in the [[SMS:CMS-Wave Cell Attributes Dialog|''Cell Attributes'']] dialog. | | :# Assign cell as a monitoring station in the [[SMS:CMS-Wave Cell Attributes Dialog|''Cell Attributes'']] dialog. |
Revision as of 14:48, 20 June 2017
This is a top level workflow. This workflow includes all of the specific workflows users will need to use in creating a CMS-WAve project. Newer and infrequent SMS users should start here.
To build a CMS-Wave model in SMS, use the following steps:
1. Start a new SMS project.
|
1. Start SMS, or clear existing projects in SMS.
|
- If SMS is already running, select File | Delete All.
- A new project can also be started by using CTRL + N.
|
|
2. Import the data.
|
1. Gather and open image files.
|
Images are imported into the GIS module in SMS.
2. Import images from the web.
|
|
|
|
3. Review and edit the elevation data.
|
1. Review elevation data for errors.
|
1. Use the Dataset Info dialog.
|
- Find the "Z", "elevation" or "depth" datasets on the geometric object (mesh, TIN, grid, raster) that is being reviewed
- Right-click on elevation data and select Info.
- Review information in the Dataset Info dialog to see that the range of values are as expected.
|
2. Use contour display options.
|
- Turn off Points and Triangles, then turn on Contours in the Scatter tab of the Display Options dialog.
- Set contour options in the Contours tab. The "Color Fill" option is recommended for this.
- Look for inconsistent points (points with values much higher/lower than their neighbors or regions where no data points exist).
- Verify that the region being modeled is covered by the elevation/depth data and there are no holes.
|
3. Rotate the elevation data.
|
- Use the Rotate tool to examine the elevation data from different angles.
|
|
2. Remove erroneous points and triangles.
|
- After reviewing the imported data, points or triangles covering regions where there are no data points should be deleted. This could include outlier points or thin triangles.
2. Manually remove points.
|
- Use Select Scatter Point tool to select erroneous points in the scatter set.
- Review and edit point data in the Edit Window.
- Delete erroneous points.
|
|
3. Add breaklines.
|
- Select the Create Breakline tool.
- Click along points of a common elevation, such as at a bank toe or levee crest, to connect these points in the surface.
- Use the Backspace key to back up if an erroneous selection is made.
- Double-click or press Enter key to complete the breakline.
|
|
4. Generate a Cartesian grid.
|
1. Create a CMS-Wave map coverage.
|
- Create a new coverage with the "CMS-Wave" type.
1. Create new coverage from scratch.
|
- Select Map Data in the Project Explorer and use the New Coverage right-click command.
- Use the New Coverage dialog to create a new coverage by selecting the desired coverage type, and naming the coverage.
|
2. Create new coverage from an existing coverage.
|
- Use the Duplicate command on an existing coverage. This will copy any feature objects on the coverage.
- Use the Rename command to give the coverage a new name.
- Change the coverage type.
|
|
3. Generate grid from the CMS-Wave coverage.
|
- Select the CMS-Wave coverage and use the Map → 2D Grid right-click command.
- Set the grid parameters in the Map → 2D Grid dialog.
|
|
5. Generate spectral energy distribution.
|
1. Create a Spectral coverage.
|
- Create a new coverage with the "Spectral" type.
1. Create new coverage from scratch.
|
- Select Map Data in the Project Explorer and use the New Coverage right-click command.
- Use the New Coverage dialog to create a new coverage by selecting the desired coverage type, and naming the coverage.
|
2. Create new coverage from an existing coverage.
|
- Use the Duplicate command on an existing coverage. This will copy any feature objects on the coverage.
- Use the Rename command to give the coverage a new name.
- Change the coverage type.
|
|
2. Create a feature point.
|
- Use the Create Feature Point tool to add a point where the spectral data is to be imported on the spectral coverage.
|
3. Assign spectral data to location.
|
- Double-click on a point in the spectral coverage using the Select Feature Point tool.
- In the Spectral Energy dialog, generate spectral grid and data.
|
|
9. Review the results.
|
1. Load solution files.
|
- The solution file should load after running the model assuming the Load Solution option was checked in the model wrapper before exiting the model run. If loading the solution file separately from the model run, do the following:
- Open the output files generated from the model run.
|
2. Review results datasets and data visualization.
|
1. Manually review dataset solutions.
|
- In the Project Explorer, click on solution dataset created from the simulation run and view results in the Graphics Window.
- Click through the time steps for each dataset to see changes over time in the Graphics Window.
|
2. Adjust the display options.
|
2. View display.
|
- Use the Rotate , Pan , and Zoom tools.
- Use the View menu commands found in the Display menu.
- Use the Frame command to center and resize the display as needed.
|
3. Adjust display.
|
- Display may need to be adjusted during the remainder of the project.
- Use the Display Options dialog and viewing tools as needed.
- Use the Frame command to center and resize the display as needed.
|
|
3. Create a film loop visualization.
|
- Select a solution dataset and use the Data | Film Loop menu command.
- Use the Film Loop Setup wizard to specify the animation parameters.
- Save and view the animation file.
|
4. Create a plot.
|
1. Load solution files if not already in the project.
|
- The solution should load automatically assuming the Load Solution option was checked in the model wrapper before exiting the model run.
- If loading the solution separately from the model run, open the solution file generated from model run.
|
2. Create an observation coverage.
|
- Create a new coverage with the "Observation" type.
- Select Map Data in the Project Explorer and use the New Coverage right-click command.
- Use the New Coverage dialog to create a new coverage by selecting the desired coverage type, and naming the coverage.
|
3. Create observation points in the observation coverage.
|
1. Create feature arcs, nodes and vertices.
|
- In the Map module, create feature objects in the active coverage.
- Use the Create Feature Arc tool to create arcs in the map coverage.
- Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
- Double-click or press the Enter key to terminate the arc.
- Use the Create Feature Node tool to create additional nodes alone or to split arcs.
|
2. Modify arcs.
|
- Feature arcs often need to be edited after initial creation.
3. Split arcs.
|
- An existing arc can be split by:
2. Add a node the arc.
|
- Use the Create Feature Node tool to add a node on an arc in order to split it into two arcs.
|
3. Add a new connecting arc.
|
- Use the Create Feature Arc tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
|
|
4. Merge arcs.
|
- Two arcs that share an end node can be merged together.
- Select the shared node using the Select Feature Node tool.
- Right-click on the node and select the Convert to Vertex command to merge the arcs.
- If desired, the Select Feature Vertex tool can be used to select and delete the new vertex.
|
|
|
4. Add observation point attributes.
|
- With the Select Feature Point tool, right-click on the observation point and select the Node Attributes command.
- Set the observation attributes in the Observation Coverage dialog.
|
5. Use the Plot Wizard to generate plot type.
|
- The Plot Wizard can generate any of the following plot types:
|
|
|
3. Use an observation profile plot.
|
1. Create an observation coverage.
|
- Create a new coverage with the "Observation" type.
- Select Map Data in the Project Explorer and use the New Coverage right-click command.
- Use the New Coverage dialog to create a new coverage by selecting the desired coverage type, and naming the coverage.
|
2. Create observation arcs in the observation coverage.
|
1. Create feature arcs, nodes and vertices.
|
- In the Map module, create feature objects in the active coverage.
- Use the Create Feature Arc tool to create arcs in the map coverage.
- Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
- Double-click or press the Enter key to terminate the arc.
- Use the Create Feature Node tool to create additional nodes alone or to split arcs.
|
2. Modify arcs.
|
- Feature arcs often need to be edited after initial creation.
3. Split arcs.
|
- An existing arc can be split by:
2. Add a node the arc.
|
- Use the Create Feature Node tool to add a node on an arc in order to split it into two arcs.
|
3. Add a new connecting arc.
|
- Use the Create Feature Arc tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
|
|
4. Merge arcs.
|
- Two arcs that share an end node can be merged together.
- Select the shared node using the Select Feature Node tool.
- Right-click on the node and select the Convert to Vertex command to merge the arcs.
- If desired, the Select Feature Vertex tool can be used to select and delete the new vertex.
|
|
|
|
|