Search results

From XMS Wiki
Jump to navigationJump to search

Page title matches

Page text matches

  • GMS:Time-Array Series
    ...om the drop-down, indicate which Time-Array Series is being applied in the Series: field. ...RAY SERIES" – Is not supported for IEVT, SURFACE, or DEPTH. The Time-Array Series is only accessible through the Rate option in the PERIODS section.
    498 bytes (66 words) - 16:37, 6 June 2022
  • WMS:XY Series Editor
    ...his data can include precipitation, discharge, and other parameters versus time or other data such as elevation-area and elevation-discharge curves. [[Image:WMS XY SeriesEditor.jpg|thumb|none|left|600 px|Example of the ''XY Series Editor'' dialog.]]
    994 bytes (156 words) - 15:45, 28 September 2017
  • SMS:Time Series Dialog
    #REDIRECT [[SMS:Time Series]]
    29 bytes (4 words) - 15:18, 17 June 2013
  • SMS:Time Series Curve Data
    #REDIRECT [[SMS:Time Series]]
    29 bytes (4 words) - 15:27, 17 June 2013
  • SMS:Timeseries
    #REDIRECT [[SMS:Time Series]]
    29 bytes (4 words) - 15:37, 17 June 2013
  • SMS:Time Series Curve Information
    #REDIRECT [[SMS:Time Series]]
    29 bytes (4 words) - 15:37, 17 June 2013
  • SMS:Time Series Graph
    #redirect [[SMS:Time Series Plot]]
    34 bytes (5 words) - 20:01, 13 October 2015
  • SMS:Time Series Plot Options
    #REDIRECT [[SMS:Time Series Plot]]
    34 bytes (5 words) - 17:47, 17 September 2013
  • Time Series Plot Option
    #REDIRECT [[SMS:Time Series Plot]]
    34 bytes (5 words) - 17:47, 17 September 2013
  • WMS:Quick Tour - HSPF
    ...input time series data from WDM files as well as the resulting output time series files.
    428 bytes (66 words) - 16:02, 11 April 2017
  • WMS:WMLibTimeSeriesPoint
    The '''public class TimeSeriesPoint''' class manages information for a time series point, such as a point in a cumulative rainfall distribution or a point in ...Pass this function a date/time (a_date) and a value (a_value) and a time series point that can be used with rainfall data will be created with the specifie
    674 bytes (105 words) - 19:09, 11 January 2017
  • SMS:CMS-Flow Cells
    ...ecifies them to be "observation" cells. Each observation cell output time series of water level or current components, flow rate and/or transport. Each obs ==Time Series Observation Output==
    2 KB (257 words) - 19:20, 25 May 2010
  • GMS:Temporal Discretization
    ...nverting general time series into discrete values that apply over specific time ranges (stress periods). ...sed in GMS to represent curves of data (in this case a time series). An xy series is manipulated by GMS with regards to feature objects in three different wa
    4 KB (646 words) - 14:29, 15 August 2017
  • SMS:ADH Time Series
    ...] editor and include [[SMS:ADH_Time_Series#ADH_Time_Series_Attributes|time series attributes]] specific to ADH. The following table describes the groups: |Time offset with depth measurement (L)
    6 KB (951 words) - 20:13, 11 September 2023
  • SMS:ADH Velocity Series Editor
    The ''Velocity Series Editor'' is used to define velocity versus time for ADH Dirichlet flow velocity boundary conditions. A velocity must be def ...ion. An undefined series consists of only the empty row. Every cell of the series (the empty row is excluded) must contain a value and cannot be "blanked out
    2 KB (368 words) - 15:14, 13 June 2019
  • SMS:Time Series
    The time series is similar to the [[XY_Series_Editor|XY series]] with a few differences. # Times series can support more than 2 columns of data.
    4 KB (650 words) - 16:31, 10 March 2017
  • SMS:BOUSS Runup / Overtopping Viewing Data
    ...rd''. There are two different views in this dialog: ''Profile'' and ''Time Series''. ...viewing the data for multiple wave sets for a single transect at the same time. Once the desired data is selected, clicking the '''Update''' button will r
    3 KB (488 words) - 15:24, 22 July 2019
  • WMS:HSPF External Sources
    ...Options'' dialog box. Not only must they exist in that file, but the time series must also be assigned to the proper segments according to the EXT SOURCES b ...gn External Sources'' dialog box is activated. In this dialog, select time series from a WDM file and assign them to the selected segment.
    2 KB (351 words) - 17:37, 18 February 2016
  • SMS:CHS Web Data Files
    ...SMS will read in these files and create a spatial data coverage with time series curves stored on the point. CHS HURDAT files are not to be read into SMS,
    670 bytes (104 words) - 16:17, 5 August 2016
  • SMS:ADCIRC Files
    ...fied-elevation-recording-stations-fort-61/ fort.61]</span>||Elevation Time Series at Specified Elevation Recording Stations ...-recording-stations-fort-62/ fort.62]</span>||Depth-averaged Velocity Time Series at Specified Velocity Recording Stations
    10 KB (960 words) - 15:28, 11 November 2016
  • SMS:Time Series Data File
    ...S. It is a simple ASCII file format that defines the type of data and its time reference. Series Type Curve Name NCols NVals Reference Date<br>
    2 KB (146 words) - 17:47, 16 December 2014
  • SMS:ADH Extract WSE
    ...ter (outflow) boundary condition and the extracted data is set as the time series. This data can be edited in the ''ADH Boundary Condition Assignment'' dialo ...l model time options'' &ndash; If extracting from a transient dataset, the time steps used can be set.
    2 KB (257 words) - 20:13, 11 September 2023
  • SMS:ADH Wind Stations
    ...ata]] coverage is used because it allows the specification of generic time series data at locations represented by feature points. ADH wind station data is s ...n, and select ''Time Series''. This will open the [[SMS:Time Series|''Time Series'']] editor.
    5 KB (817 words) - 20:13, 11 September 2023
  • SMS:Time Series Plot
    ...', found in the [[SMS:Display Menu|''Display'']] menu, and selecting "Time Series" from the plot type list in Step 1 of the [[SMS:Plot_Window#Plot_Wizard|''P == Time Series Plot Options ==
    4 KB (665 words) - 21:44, 14 April 2022
  • GMS:HydroGeoSphere Polygon Properties
    ...the ''XY Series Editor'' dialog that is opened by clicking the '''Edit XY Series''' button by either manually entering the data, or importing the data. **** ''Time rasters'' &ndash; The '''Edit Table...''' button opens the ''Time raster table'' dialog where the data is entered by selecting a raster from
    4 KB (649 words) - 15:26, 2 May 2024
  • XY Series Editor
    [[File:XY Series Editor.png|thumb|500 px|Example of the ''XY Series Editor'' dialog]] [[File:XY SeriesEditorCurve.png|thumb|500 px|Example of the ''XY Series Editor'' dialog]]
    3 KB (533 words) - 19:57, 24 January 2023
  • WMS:HSPF WDM File Interaction
    ...put for hydrologic modeling. It also reports results of simulation as time series datasets. These data are stored in a watershed data management (WDM) file. ...tput data from HSPF are stored in a WDM file. AS in that file are the time series used for input to HSPF. In order to view the se datasets, open the'' WDM Da
    2 KB (367 words) - 20:17, 12 December 2023
  • GMS:HydroGeoSphere Arc Properties
    **** "Time series" ***** ''Time series (start)'' &ndash; Time-varying values of the boundary condition at the start of the arc.
    6 KB (871 words) - 15:03, 2 May 2024
  • SMS:CMS-Flow Observation Cells
    ...t to be written can be specified on the ''Cells'' tab. For each type (time series, flow rate, and transport), individual calculations can be selected and the ...ation symbols can be selected for the three observation output types (Time series, Flow rate, Transport) and a combination of types. The specific output type
    4 KB (645 words) - 14:26, 17 June 2019
  • GMS:Stress Periods
    ...nning of each stress period. Stress periods can be subdivided into smaller time steps, if desired. The '''Stress Periods''' button in the [[GMS:Global Opti ...he spreadsheet. The stress period properties such as length and number of time steps can now be copied quickly and easily to other stress periods using th
    3 KB (537 words) - 15:57, 29 March 2023
  • WMS:WMLibRainfallData
    ...To get the times in all the rainfall distributions to match the starting time of the job control data, use the '''SetRainfallTimesToJobControl''' functio
    994 bytes (140 words) - 19:10, 11 January 2017
  • WMS:DSS Files
    ...S. HEC-HMS and HEC-RAS both use DSS files for importing and exporting time series data. ...has header information that identifies the units, start date, and/or start time of the information in the record. Each record is identified by a unique ide
    2 KB (347 words) - 15:43, 24 February 2016
  • GMS:MF6 Time Series Files Dialog
    {{MF6 Time Series Files Dialog}}
    125 bytes (15 words) - 15:35, 31 May 2022
  • SMS:ADH Model Control Time
    [[File:ADH Model Control Time.png|thumb|500 px| ''Time'' tab of the ''ADH Model Control'' dialog]] ...[SMS:ADH Model Control|''ADH Model Control'']] window by clicking on the ''Time'' tab.
    7 KB (1,099 words) - 20:19, 11 September 2023
  • SMS:CMS-Flow Wind and Wave
    ...kes a time series editor to specify the variation of wind velocity through time in the simulation. ...me series editor to specify the variation in direction of the wind through time in the simulation.
    2 KB (280 words) - 18:34, 25 May 2010
  • SMS:Spatial Data Coverage
    ...of data at node locations. Most commonly, this data would consist of time series curves. The data can be accessed or added to a node by the right-click men [[File:TimeSeriesEditor.jpg|thumb|420px|right|''Time Series Editor'']]
    7 KB (1,108 words) - 22:13, 23 July 2019
  • WMS:HSPF External Targets
    ...M file, which is specified in the ''HSPF Global Options'' dialog box, each time HSPF is run. Thus, specify what output is desired from HSPF and where to wr ...get, the following options must be set: the group to which the source time series belong must be selected from the Group box; the source member name must be
    2 KB (346 words) - 17:38, 18 February 2016
  • GMS:Time Settings
    [[Image:TimeSettings.png|thumb|281px|''Time Settings'' dialog]] .... The dialog is reached through the ''Edit'' | '''Time...''' menu command. Time data can be encountered in various places in GMS such as:
    2 KB (303 words) - 22:06, 15 March 2022
  • SMS:ADH Boundary Condition Assignment
    |Specified by a [[SMS:ADH Time Series|Flow (per unit length) time series]]; <font color="green">NB OVL</font> card with a friction card |Specified by a [[SMS:ADH Time Series|Velocity time series]]; <font color="green">DB OVL</font> card
    9 KB (1,436 words) - 20:15, 11 September 2023
  • GMS:HydroGeoSphere Point Properties
    ...the ''XY Series Editor'' dialog that is opened by clicking the '''Edit XY Series''' button by either manually entering the data, or importing the data. ...the ''XY Series Editor'' dialog that is opened by clicking the '''Edit XY Series''' button by either manually entering the data, or importing the data.
    4 KB (637 words) - 15:04, 2 May 2024
  • GMS:MF6 DRN Package
    ...ist of drain conductance rates to the listing file for every stress period time step in which "BUDGET PRINT" is specified in [[GMS:MF6 OC Package|Output Co ...e '''Files...''' button to bring up the [[#Time Series Files Dialog|''Time Series Files'' dialog]].
    4 KB (605 words) - 20:40, 15 March 2022
  • GMS:MF6 RIV Package
    ...ies...''' &ndash; Click to bring up the [[#Time Series Files Dialog|''Time Series Files'' dialog]]. ...e the list of river flow rates to the listing file for every stress period time step in which "BUDGET PRINT" is specified in [[GMS:MF6 OC Package|Output Co
    5 KB (728 words) - 21:17, 15 March 2022
  • SMS:ADH Model Control Output
    ...tartup and at each time step specified in a <font color="green">XY1</font> series definition and referred to by the <font color="green">OC</font> card. Flux List box contains the times to be contained in the output series. Multiple selection is enabled for deleting times.
    3 KB (475 words) - 20:20, 11 September 2023
  • GMS:MF6 RCH Package
    ...he list of recharge flow rates to the listing file for every stress period time step in which "BUDGET PRINT" is specified in [[GMS:MF6 OC Package|Output Co ...e '''Files...''' button to bring up the [[#Time Series Files Dialog|''Time Series Files'' dialog]].
    4 KB (674 words) - 21:17, 15 March 2022
  • GMS:MF6 CHD Package
    ...st of constant-head flow rates to the listing file for every stress period time step in which "BUDGET PRINT" is specified in [[GMS:MF6 OC Package|Output Co ...e '''Files...''' button to bring up the [[#Time Series Files Dialog|''Time Series Files'' dialog]].
    4 KB (614 words) - 20:38, 15 March 2022
  • SMS:BOUSS-2D Probes
    ...levation, velocities, force, and pressure at every grid point and at every time step. However, due to the number of data points in the domain, this is usua * '''Eta Time Series Plot''' &ndash; Creates an eta time series plot.
    5 KB (825 words) - 22:21, 22 July 2019
  • GMS:MF6 GHB Package
    ...ist of general head flow rates to the listing file for every stress period time step in which "BUDGET PRINT" is specified in [[GMS:MF6 OC Package|Output Co ...e '''Files...''' button to bring up the [[#Time Series Files Dialog|''Time Series Files'' dialog]].
    4 KB (630 words) - 20:54, 15 March 2022
  • GMS:MF6 EVT Package
    ...st of evapotranspiration rates to the listing file for every stress period time step in which "BUDGET PRINT" is specified in [[GMS:MF6 OC Package|Output Co ...e '''Files...''' button to bring up the [[#Time Series Files Dialog|''Time Series Files'' dialog]].
    6 KB (903 words) - 20:49, 15 March 2022
  • SMS:BOUSS-2D Parameter File
    The BOUSS-2D parameter file contains a series of comments and keywords that define the components and control the options <br># Time Series Output File Names
    6 KB (775 words) - 17:06, 14 December 2016
  • WMS:WMLibOutletPoint
    ...ted with the specified combine name and with the same route name. The lag time is not used in the HEC-1 simulation, but is used with the '''ApplyLagTimes' ...outlet point by calling '''GetHydrograph''', which returns a list of time series points.
    3 KB (457 words) - 19:09, 11 January 2017
  • GMS:MF6 CNC Package
    ...ll be printed to the listing file. Flow rates will be printed for the last time step of each stress period. ...LEIN'' &ndash; This allows time series files to be used as input to assign time-varying values. Specifying this option will allow a '''Files...''' button t
    6 KB (973 words) - 20:38, 15 March 2022
  • WMS:GSSHA Solution Data
    ...d datasets, the cell underlying the feature node is used to extract a time series for the specified dataset. ...ies'' dialog, where the selected solution dataset can be exported as an XY Series file (XYS).
    1 KB (214 words) - 21:00, 21 May 2019
  • GMS:CHD Package
    ...t be simulated. To address this type of boundary, a new package called the Time Variant Specified Head (CHD) package has been developed. The Constant Head NOTE: GMS does not support parameters for the Time Variant Specified Head (CHD) package.
    4 KB (704 words) - 18:00, 11 April 2023
  • WMS:TR-20 Job Control Parameters
    ...nit hydrograph'' radio button and defining the unit hydrograph in the time series editor. ...ensionless unit hydrograph, a unit hydrograph must be defined using the XY Series Editor. Several unit hydrographs included with NRCS' WinTR-55 software have
    4 KB (615 words) - 20:59, 13 December 2023
  • WMS:What's new in WMS version 10.1
    === Time Series Data Calculator === ...Series Editor program to perform simple mathematical operations using time series data.
    4 KB (597 words) - 23:14, 9 January 2023
  • WMS:DSS Files-WMS Interface
    ...dialog comes up when reading a DSS file from the [[WMS:XY Series Editor|XY Series Editor]] or from the '''Open''' command in the ''File'' menu: ...brings up the data from the DSS file for the selected pathname in the ''XY Series Editor'' which allows editing and plotting the data.
    3 KB (556 words) - 18:56, 29 June 2018
  • WMS:GSSHA Feature Nodes
    ..., this option can be used to tell GSSHA to output the sediment load versus time at this location to the OSL file. ...up the [[WMS:XY Series Editor|''XY Series Editor'' dialog]]. This allows a time varying pump rate to be entered.
    6 KB (1,029 words) - 22:06, 7 July 2020
  • GMS:MF6 SRC Package
    ...there is no Output Control option, then they will be printed for the last time step of each stress period. ...LEIN'' &ndash; This allows time series files to be used as input to assign time-varying values. Specifying this option will allow a '''Files...''' button t
    7 KB (1,170 words) - 21:16, 15 March 2022
  • SMS:ADCIRC Output
    ...two global output files: water-surface elevation and velocity. To set the time for the two files: ...''Output Files Created by Adcirc'' section scroll down to ''Elevation Time Series (Global)'' and turn the ''Output'' checkbox on.
    10 KB (1,430 words) - 15:22, 19 June 2013
  • WMS:Espey Lag Time Equations
    ...be computed by subtracting one-half the computation time interval from the time rise. Equations to compute Tr and Cp are given below: :''T<sub>r</sub>'' = time from the beginning of effective rainfall to the peak of the unit hydrograph
    2 KB (398 words) - 15:12, 29 September 2017
  • GMS:MF6 LKT Package
    ...there is no Output Control option, then they will be printed for the last time step of each stress period. ...there is no Output Control option, then they will be printed for the last time step of each stress period.
    12 KB (1,961 words) - 20:40, 15 March 2022
  • GMS:MF6 MWT Package
    ...there is no Output Control option, then they will be printed for the last time step of each stress period. ...there is no Output Control option, then they will be printed for the last time step of each stress period.
    12 KB (1,987 words) - 21:25, 15 March 2022
  • GMS:MF6 SFT Package
    ...there is no Output Control option, then they will be printed for the last time step of each stress period. ...there is no Output Control option, then they will be printed for the last time step of each stress period.
    12 KB (1,986 words) - 21:16, 15 March 2022
  • WMS:GSSHA File Types
    :GSSHA soils moisture time series output file :GSSHA outlet hydrograph time series discharge file
    3 KB (476 words) - 01:12, 27 April 2019
  • GMS:MF6 UZT Package
    ...there is no Output Control option, then they will be printed for the last time step of each stress period. ...there is no Output Control option, then they will be printed for the last time step of each stress period.
    12 KB (1,901 words) - 20:49, 15 March 2022
  • GMS:MF6 WEL Package
    ...te the list of well flow rates to the listing file for every stress period time step in which "BUDGET PRINT" is specified in [[GMS:MF6 OC Package|Output Co ...k the '''Files...''' button when this is turned on to bring up the [[#Time Series Files Dialog|''TS6 FILEIN Files'' dialog]].
    5 KB (744 words) - 20:48, 15 March 2022
  • SMS:PTM Trap Output
    STEP DATE TIME PARTICLE TRAP STEP DATE TIME PARTICLE TRAP MASS MEDIAN_SIZE SOURCE
    4 KB (656 words) - 15:47, 29 November 2017
  • GMS:MF6 LAK Package
    ...e '''Files...''' button to bring up the [[#Time Series Files Dialog|''Time Series Files'' dialog]]. ...NVERSION'' &ndash; Value that is used in converting outlet flow terms into time units.
    6 KB (918 words) - 21:27, 15 March 2022
  • WMS:Rational Method Basin Data
    ...utes so that the edit fields are filled with the values of that basin each time a basin is selected. This also makes it possible to use the areas computed ...update automatically, however the '''Update Q''' button may be used at any time to update the value for a given parameter (alternatively, tab to the next f
    3 KB (433 words) - 17:25, 17 October 2017
  • WMS:WMLibHydroTree
    ...nformation for the HEC-1 simulation: the start time ('''a_startTime'''), a time step ('''a_timeIncrement'''), and the number of hydrograph ordinates ('''a_ ...to each outlet and lag the computed hydrographs at each outlet by the lag time assigned to each '''OutletPoint'''. See the example in the [[WMS:WMLib|int
    5 KB (713 words) - 19:08, 11 January 2017
  • GMS:MF6 MVR Package
    ...ite the list of MVR flow rates to the listing file for every stress period time step in which "BUDGET PRINT" is specified in [[GMS:MF6 OC Package|Output Co ...eries.svg|14px]] &ndash; Click to bring up the [[GMS:XY Series Editor|''XY Series Editor'' dialog]]. Requires that a cell be selected in the table.
    4 KB (574 words) - 20:37, 15 March 2022
  • WMS:HEC-HMS Post-Processing
    *Part E: The time increment for the hydrograph ......''' button. This will bring the data into the [[WMS:XY Series Editor|XY series editor]] where a plot of the output results can be seen as shown below.
    2 KB (308 words) - 18:20, 25 March 2020
  • SMS:CMS-Flow Coverages 13.0
    ***''Flow Source'' &ndash; Specifies a time series of water fluxes as either a constant value or as a curve. ...Curve''' button will bring up an ''XY Series Editor'' dialog where a time series of water fluxes can be entered.
    7 KB (1,147 words) - 17:16, 5 April 2021
  • SMS:SRH-2D Boundary Conditions
    *''Discharge (Q)'' &ndash; Specify as either a "Constant" or a "Time Series". **"Time Series" &ndash; Use for unsteady flow.
    11 KB (1,715 words) - 20:30, 10 May 2024
  • SMS:Q&A ADCIRC
    ...reate a hydrograpgh to define a nodestring boundary condition, what do the time and flowrate variables have reference to? ...his would ensure there is more than enough data for the complete model run time.
    4 KB (675 words) - 16:16, 11 December 2017
  • WMS:TR-55 Basin Data
    ==Time of Concentration== Three different options exist for determining the basin time of concentration (tc).
    3 KB (514 words) - 14:06, 19 October 2017
  • SMS:SRH-2D Boundary Conditions 13.0
    *''Discharge (Q)'' &ndash; Specify as either a "Constant" or a "Time Series". **"Time Series" &ndash; Use for unsteady flow.
    11 KB (1,743 words) - 18:43, 5 April 2021
  • WMS:HEC-HMS Transform
    ...puted from one of several equations using these attributes, or by using a time computation coverage. These options are accessed from the [[WMS:Travel Tim ...if wanting to derive a [[WMS:Basin HEC-1 Cards#Clark Unit Hydrograph (UC)|time area curve]] that is more specific to the sub-basin.
    5 KB (750 words) - 16:39, 11 October 2017
  • SMS:CMS-Flow Menu 11.2 and earlier
    ...user to load an already-existing time series for use with one of the time series boundary conditions. Boundary conditions specified within this dialog inclu **'''Flow Rate-forcing''' &ndash; A time series must be defined (by clicking the '''Define Curve…''' button) that contain
    6 KB (1,013 words) - 15:32, 13 September 2017
  • SMS:CMS-Flow/Save Points
    ==Time Series Plot Wizard== SP files that are read into sms can be plotted into a time series curve. To view the curve do the following:
    4 KB (632 words) - 14:26, 17 June 2019
  • SMS:XY Series Files
    The ''XY Series Editor'' is used to define x, y series data curves. These data curves can then be used to define such things as: *Time dependent boundary conditions
    3 KB (405 words) - 16:27, 26 September 2017
  • WMS:WMLib
    ...s to a file that can be read into the Time Series Editor (*.ts). The Time Series Editor is shipped with WMS and a license to the editor is included with a l // Set the job control start time and build the tree from a file
    6 KB (767 words) - 15:07, 16 June 2014
  • WMS:EPANET
    ...terns using the ''XY Series Editor'' dialog. See [[WMS:XY Series Editor|XY Series Editor]]. ...urves using the ''XY Series Editor'' dialog. See [[WMS:XY Series Editor|XY Series Editor]].
    3 KB (440 words) - 18:55, 5 June 2023
  • WMS:HEC-1 Job Control
    ...&ndash; The beginning time of the simulation is defined in this entry. The time should be specified as a single integer number defining the hours and minut ...will be the number of ordinates minus one multiplied by the computational time interval.
    7 KB (1,119 words) - 17:07, 23 May 2022
  • SMS:CMS-Flow Coverages
    ***''Flow Source'' &ndash; Specifies a time series of water fluxes as either a constant value or as a curve. ...'Curve''' button will bring up an ''XY Series Editor'' dialog where a time series of water fluxes can be entered.
    8 KB (1,278 words) - 19:49, 17 March 2021
  • GMS:MODFLOW 6 Cell Properties Dialog
    ...eries.svg|14px]] &ndash; Click to bring up the [[GMS:XY Series Editor|''XY Series Editor'' dialog]]. Requires that a cell be selected in the table. ...ries is specifically called in the ''Head'' column. For example, if a time series named "ts_1" is defined, enter "ts_1" in the Head column of the appropriate
    6 KB (990 words) - 20:42, 15 March 2022
  • GMS:MF6 UZF Package
    ...k the '''Files...''' button when this is turned on to bring up the [[#Time Series Files Dialog|''TS6 FILEIN Files'' dialog]]. ...eries.svg|14px]] &ndash; Click to bring up the [[GMS:XY Series Editor|''XY Series Editor'' dialog]]. Requires that a cell be selected in the table.
    6 KB (889 words) - 20:49, 15 March 2022
  • SMS:RMA4 Boundary Conditions
    ...can be defined as constant or transient using the [[XY Series Editor|''XY Series Editor'']]. ** '''Curve''' button &ndash; Brings up the ''[[XY Series Editor]]''.
    5 KB (775 words) - 21:54, 12 June 2020
  • GMS:The GMS Window
    ==Time Steps Window== ...is active in the Project Explorer. The window allows selecting individual time steps for display in the Graphics Window. The window is usually located ben
    3 KB (440 words) - 14:21, 23 October 2017
  • GMS:GAGE Package
    ...to lakes and SFR stream reaches. A gaging station provides detailed time series data. MODFLOW generates a text file for each GAGE station that is availabl :'''0''' &ndash; Default values including time, stage, outflow, and solute concentration.
    3 KB (514 words) - 19:48, 6 March 2023
  • WMS:WMLibSubBasin
    ...e specified outlet point. The time of concentration is converted to a lag time using the SCS equation and is used in the HEC-1 SCS Unit Hydrograph method ...t a sub-basin by calling '''GetHydrograph''', which returns a list of time series points.
    3 KB (502 words) - 19:09, 11 January 2017
  • WMS:TR-20 Basin Data
    ...g the time of concentration. Two different methods exist for computing the time of concentration using [[WMS:Travel Times from Basin Data|computed basin da ...Many of these coefficients and times can be used in HEC-1 models, and the time of concentration can be used in TR-20 watershed models. By de-selecting the
    5 KB (784 words) - 17:18, 9 June 2023
  • GMS:MF6 MAW Package
    ...e '''Files...''' button to bring up the [[#Time Series Files Dialog|''Time Series Files'' dialog]]. ...eries.svg|14px]] &ndash; Click to bring up the [[GMS:XY Series Editor|''XY Series Editor'' dialog]]. Requires that a cell be selected in the table.
    8 KB (1,130 words) - 22:35, 20 December 2022
  • GMS:FEMWATER Model Input
    ...its|''Units'']] dialog. This dialog is used to enter the units for length, time, concentration, etc. for the simulation. GMS uses the selected unit options ...-time step is divided by 2. NXW is used as an "Initial number of steps per time step" and the other parameters on the PT1 card are ignored.
    10 KB (1,604 words) - 16:02, 17 August 2017
  • SMS:Plot Window
    # [[SMS:Error vs. Time Step Plot|Error vs. Time Step]] # [[SMS:Time Series Plot|Time Series]]
    6 KB (939 words) - 16:57, 22 June 2023
  • SMS:ADH Boundary Condition File Cards
    === Time Controls === ...me" character string in quotes preceding the regular card fields. The date/time information is used to relate the simulation with other data loaded in SMS
    19 KB (2,781 words) - 20:29, 11 September 2023
  • SMS:AdH Boundary Conditions
    **''Discharge'' &ndash; Clicking '''Edit''' opens the ''[[XY Series Editor]]'' dialog where discharge values can be entered. **''Flow per unit area'' &ndash; Clicking '''Edit''' opens the ''[[XY Series Editor]]'' dialog where discharge values can be entered.
    17 KB (2,438 words) - 19:55, 11 September 2023
  • WMS:GSSHA Precipitation
    ...]] module. All rainfall types in GSSHA must be tied to a specific point in time by specifying the year, month, day, hour, and minute of each rainfall data ...me'' &ndash; A date and time drop-down that allows for selecting the start time of the rainfall event. Selection can be made directly from the drop-down, o
    6 KB (889 words) - 17:04, 4 January 2024
  • GMS:Map to Modules
    ...transient. It allows the user to define the number of time steps, and the time step times to be created for the scatter point dataset. ...XY series use dates/times, the minimum time will be used as the reference time for the scatter point dataset.
    9 KB (1,620 words) - 15:03, 15 August 2017
  • WMS:Plot Wizard
    ...results for the finite difference grid, and observed values exist. At this time they are still under development and will not be discussed in detail here.
    2 KB (305 words) - 15:07, 10 January 2017
  • GMS:MF6 SFR Package
    ...streamflow routing flow rates to the listing file for every stress period time step in which "BUDGET PRINT" is specified in [[GMS:MF6 OC Package|Output Co ...k the '''Files...''' button when this is turned on to bring up the [[#Time Series Files Dialog|''TS6 FILEIN Files'' dialog]].
    8 KB (1,211 words) - 21:16, 15 March 2022
  • GMS:MF6 HFB Package
    ...eries.svg|14px]] &ndash; Click to bring up the [[GMS:XY Series Editor|''XY Series Editor'' dialog]]. Requires that a cell be selected in the table. **'''Open Time Series''' [[File:Open Macro.svg|14px]] &ndash; Click to bring up the
    3 KB (442 words) - 19:00, 14 December 2022
  • SMS:Q&A BOUSS2D
    '''Q:''' What is the meaning of the ''Eta Time Series'' plots created at a probe? :'''A:''' These plots are measurements of the surface elevation over time. They represent the free surface of your simulation.
    2 KB (326 words) - 16:17, 11 December 2017
  • GMS:MODFLOW Source/Sink Dialog
    ..., buttons appear which can be used to bring up the [[XY Series Editor|''XY Series Editor'']]. A value is entered for each of the defined stress periods. ...mulation. A constant value can be entered for these parameters in the ''XY Series Editor'' and the resulting curve is a flat line.
    6 KB (969 words) - 23:07, 22 January 2024
  • SMS:CMS-Flow Files
    ...t file, either select ''Write Hot Start output file'' and select an output time, or select ''Automatic recurring Hot Start file'' and choose an output inte *Choosing to write the hot start file at a specific output time will create the following file:
    8 KB (1,161 words) - 19:12, 21 September 2017
  • SMS:ADCIRC Boundary Conditions 12.3 and earlier
    ...Discharges are specified either for harmonic discharge forcing or for time series discharge forcing. ...are specified either as tidal constituents for harmonic forcing or as time series or water level.
    8 KB (1,156 words) - 15:58, 11 December 2018
  • WMS:Save GSSHA Project File
    ...of the tabs in the ''Save GSSHA Project File'' dialog to be changed at one time. Click '''Browse...''' to bring up the ''Browse For Folder'' dialog to sele *''Time series data'' &ndash; Path to the time series data file.
    11 KB (1,815 words) - 00:36, 2 May 2019
  • SMS:SRH-2D Advanced Simulation
    ...vailable include inlet and outlet boundary conditions, material roughness, time step controls, and initial conditions controls. ...eries''' &ndash; Opens the ''XY Series Editor'' dialog. Here multiple time series, rating curves, and other variables can be entered. The data is stored and
    6 KB (918 words) - 19:57, 9 July 2021
  • SMS:SRH-2D Populate Dialog
    ...Tree Item'' dialog were an elevation dataset can be selected as wel as any time steps in the dataset can be chosen. ...e variables will be automatically entered for the rating curve in the ''XY Series Editor'' when exiting this dialog.
    4 KB (657 words) - 18:45, 5 April 2021
  • SMS:BOUSS-2D Simulations
    ...time series at a location, or a combination of these two options (multiple time steps of data that includes a value at each cell). The output options, alon ...s data from a specified start time, to a specified end time at a specified time step.
    5 KB (830 words) - 21:24, 16 June 2020
  • GMS:Plot Wizard
    :* Error vs. Time Step :* Time Series
    38 KB (6,273 words) - 20:01, 11 May 2023
  • GMS:Active/Inactive Points
    ...e time step where the sample is missing. GMS disregards the point for that time step and performs the interpolation using the remaining active points.
    3 KB (514 words) - 19:29, 1 December 2023
  • WMS:Travel Times from Basin Data
    ...le not computed by WMS then enter the value in this dialog before a travel time can be computed. The process of computing travel times for a selected basin ...the lag time and time of concentration will be computed automatically each time that basin data are computed or when the curve number changes. If not wanti
    6 KB (845 words) - 20:27, 13 May 2020
  • WMS:Plot Windows
    ...drographs. A plot window is often embedded within a dialog to display time series data such as rainfall distributions or storage capacity curves, but the pri Currently, specified time steps are not saved.
    4 KB (649 words) - 16:10, 1 May 2023
  • WMS:GSSHA Observations
    GSSHA will run an automated calibration using your observed time series data if you have auto-calibration turned on for a calibration. The auto-cal ...ned on. Clicking '''Define...''' brings up the [[WMS:XY Series Editor|''XY Series Editor'' dialog]].
    5 KB (750 words) - 00:50, 17 May 2019
  • SMS:AdH Model Control
    * ''Time'' &ndash; Specifies the simulation duration. By default, ADH uses transien ==Time==
    15 KB (2,372 words) - 19:56, 11 September 2023
  • SMS:ADH Material Properties
    ...B OVL</font> boundary condition card with a <font color="green">XY1</font> series definition card.
    4 KB (617 words) - 20:13, 11 September 2023
  • WMS:Rational Method Rainfall Intensity
    The ''IDF Computation'' dialog (shown below) can be used to create a series of T-year IDF curves from HYDRO-35, NOAA Atlas 2, or user defined data. ...yed in red. Finally, an intensity value, i, is determined by specifying a time of concentration as outlined below and then clicking on the Intensity butto
    4 KB (641 words) - 21:28, 8 June 2023
  • WMS:Create Reservoir in DEMs
    ...ations. These three curves are stored in the storage list used by the time series editor so that they can be used later to define routing in one of the suppo
    1 KB (203 words) - 20:28, 23 December 2019
  • SMS:ADH Model Control Model Parameters
    ...coverage define a set of wind gages (defined as feature points) with time series of wind data associated. ...positive integer edit field specify whether a tolerance for all wind time series is included and its value. These controls are enabled only if a coverage is
    4 KB (614 words) - 20:18, 11 September 2023
  • SMS:Long Wave Input Toolbox
    ...s been loaded into or created by the SMS spectra generator. SMS creates a series of frequencies and energy densities from this spectrum that are fed into th ...hese including significant wave height, mean water level, runup and a time series of water surface. The IGWT will use the water surface file (''*_ts_eta.001
    7 KB (1,145 words) - 15:13, 3 July 2019
  • WMS:Interpolation Options
    ...rpolation Options'' dialog. This button also allows interpolation from all time steps of a transient dataset to be performed. ...u is designed to interpolate rainfall values at scattered points to the XY series representing rainfall for a basin in either HEC-1 or TR-20. The scattered p
    4 KB (631 words) - 21:26, 4 May 2020
  • SMS:PTM Sources
    ...nstantaneously released total mass, or as a mass release rate over a given time period. PTM represents this mass by a finite number of particles. ...occurs at a fixed location, and the full release of material occurs at the time given and with the properties specified.
    5 KB (819 words) - 20:11, 11 June 2020
  • GMS:Animations
    ...ow use of a ''Transient'' option and a ''Steady State'' option at the same time. Moving view, however, can be used by itself or in conjunction with any co ...es. A transient animation can also be used to show particle tracking over time, even with a steady state solution.
    10 KB (1,636 words) - 18:09, 27 February 2023
  • SMS:SMS User Manual vol. 1
    :[[SMS:Time Steps Window|Time Steps Window]] :[[SMS:Error vs. Time Step Plot|Error vs. Time Step Plot]]
    13 KB (1,678 words) - 18:36, 5 May 2022
  • SMS:ADH SMS 13.2 and Earlier
    * [[SMS:ADH Time Series|'''Time Series Data''']] &ndash; Brings up a ''Time Series'' dialog. * [[SMS:ADH Time Series|Time Series]]
    9 KB (1,311 words) - 20:32, 11 September 2023
  • SMS:CMS-Flow Model Control 11.2
    ===Time Control=== In this section the user can set the starting time, duration and hydraulic time step. The Ramp duration defines the length of an incremental loading portio
    14 KB (2,115 words) - 15:35, 13 October 2017
  • WMS:Basin HEC-1 Cards
    ...the direct input hydrograph. Click to open the [[WMS:XY Series Editor|''XY Series Editor'' dialog]]. ...n of the outflow hydrograph. Click to open the [[WMS:XY Series Editor|''XY Series Editor'' dialog]].
    23 KB (3,573 words) - 16:06, 14 July 2020
  • GMS:File Formats
    |Time Data || tim |Time series || ts
    8 KB (934 words) - 23:23, 27 December 2017
  • SMS:Particle Module Display Options
    ...teps. Include symbol can be turned on to display little filled circles at time step positions within the tail. The Color based on sets whether the partic ...ve particle set is displayed for convenience. ''Display every'' displays series of particles, i.e. an input of 1 displays every particle, but an input of
    6 KB (912 words) - 23:10, 4 August 2020
  • WMS:2D Grid Module Project Explorer
    ...asets into a solution allows several solutions to be in memory at the same time. Several dialogs look for solutions and the associated datasets to set up a ...int/Node Type'' dialog. This dialog will only show the output dataset time series for the cell that underlies the feature point selected. To compare the solu
    6 KB (941 words) - 23:19, 16 May 2019
  • SMS:Wave Gages
    ...ave gage, specify a depth and wave events. Each wave event has a date and time, a H0, a period, and a direction. The model computes the wave conditions f * A time series of wave data events &ndash; Obtain these events either from a buoy or from
    4 KB (631 words) - 14:21, 15 July 2019
  • SMS:RMA2
    *** Uniformly over the model domain; constant or time-varying *** As a storm; front or tropical cyclonic event (time-varying)
    7 KB (1,000 words) - 19:01, 8 June 2023
  • WMS:Other Software
    ...ownloads.aquaveo.com/f.php5?s=TimeSeriesEditor&v=2.0&p=setup Download Time Series Editor 2.0 Installation (.exe)]
    2 KB (333 words) - 22:56, 9 January 2023
  • WMS:GSSHA Menu
    ...asets into a solution allows several solutions to be in memory at the same time. Several dialogs look for solutions and the associated datasets to set up a ...int/Node Type'' dialog. This dialog will only show the output dataset time series for the cell that underlies the feature point selected. To compare the solu
    6 KB (964 words) - 17:57, 21 May 2021
  • WMS:Routing HEC-1 Cards
    *'''Define QI''' &ndash; Select to bring up the [[WMS:XY Series Editor|''XY Series Editor'' dialog]]. *'''Define QO''' &ndash; Select to bring up the [[WMS:XY Series Editor|''XY Series Editor'' dialog]].
    22 KB (3,367 words) - 22:44, 13 July 2020
  • WMS:Overview of Floodplain Delineation
    ...re the water surface elevation data]]. Water elevations data consists of a series of surface water elevations points defined as x, y, z (where z is the eleva ...ese datasets can be used to display contours on the TIN and converted to a series of output coverages (maps), including a [[WMS:Flood Extent#Flood Depth Map|
    6 KB (942 words) - 15:57, 14 December 2017
  • GMS:MF6 CSUB Package
    ...TRESS_LAG'' &ndash; This indicates that effective stress from the previous time step will be used to calculate specific storage values. This is helpful wit ...LEIN'' &ndash; This allows time series files to be used as input to assign time-varying values. Specifying this option will allow a '''Files...''' button t
    17 KB (2,662 words) - 20:38, 15 March 2022
  • KMZ files
    ...tion using the [[SMS:Animations|''Film Loop Wizard'']]. This will export a series of raster images which can be animated in Google Earth©. The background co ...when exporting KMZ files. An offset from UTC can be specified. A list of time zone offsets from UTC is given [http://en.wikipedia.org/wiki/Timezones here
    4 KB (617 words) - 14:46, 25 May 2018
  • GMS:File Import Wizard Supported File Formats
    ..."Name&#124;Timestep". For example, "Dataset1&#124;January 1, 1900". All time steps of a transient dataset should be given the same name. ..."Name&#124;Timestep". For example, "Dataset1&#124;January 1, 1900". All time steps of a transient dataset should be given the same name.
    24 KB (3,306 words) - 14:08, 14 May 2019
  • WMS:HEC-HMS
    ...t importing and exporting DSS files, allowing for reading and writing time series data from and to HMS. ...le includes the job control data, or simulation global parameters, such as time step, number of ordinates, id cards, etc.
    6 KB (961 words) - 19:05, 5 May 2020
  • SMS:Converting Feature Objects
    === Time Step Times === ...ement is transient. It allows defining the number of time steps, and the time step times to be created for the scatter point dataset.
    15 KB (2,526 words) - 18:21, 28 August 2020
  • SMS:SMS User Manual vol. 3
    :[[SMS:ADH Time Series|ADH Time Series]] :[[SMS:ADH Model Control Time|ADH Model Control Time]]
    13 KB (1,829 words) - 20:39, 9 January 2023
  • GMS:HydroGeoSphere Materials
    ** ''Time dependent K for chosen elements'' &ndash; Table defining time on and hydraulic conductivities in the x-, y-, and z- directions for each p ** ''Time varying friction'' &ndash; Import a table containing Time and Manning roughness coefficient
    9 KB (1,304 words) - 16:33, 2 May 2024
  • WMS:MODRAT Edit Parameters
    ===Time of Concentration/Tc (min)=== ...mpute Regression Tc|'''Compute Regression Tc''']] button will launch the ''Time Computation'' dialog where Tc can be computed using the LACDPW regression e
    13 KB (2,111 words) - 16:00, 14 December 2023
  • WMS:Radar Rainfall
    ...e suggested data from the NCDC website, then the filename has the date and time. The last numbers of the filename is the year, month, day, hour, and minut # Select the starting date and time of the precipitation grids being used.
    17 KB (2,845 words) - 21:36, 3 February 2023
  • GMS:ETS Package
    ...ion of evapotranspiration rate to head is defined over the model grid by a series of two-dimensional arrays; therefore, PXDP and PETM also are specified as a ...When this is done, the standard ''[[XY Series Editor]]'' is used. The ''XY Series Editor'' is a simple tool for creating 2D curves. When used to define the E
    9 KB (1,497 words) - 20:14, 5 March 2024
  • WMS:Feature Objects Menu
    ...t has attributes are the polygons. Other coverages, like cross sections or time computation arcs only have attributes for the lines. When selecting the ''' Just defining a series of arcs that form a closed loop, or polygon, does not create a polygon. Pol
    10 KB (1,698 words) - 21:18, 17 December 2019
  • WMS:File Extension
    ...llows a Digital Line Graph file to be imported and points connected into a series of arcs. USGS DLG files, like DEMs, can be downloaded via the Internet and ...files||This format is used for importing and exporting time series and XY series data to and from HEC-RAS, HEC-HMS, and other HEC software.
    5 KB (815 words) - 15:44, 29 November 2017
  • GMS:DRN Package
    ...nterpolated from an existing TIN. Conductance may be constant or vary with time. ...n is defined as a drain, the elevation and conductance values (constant or time-varying) are applied uniformly over the entire polygon. When an arc is assi
    4 KB (656 words) - 19:46, 6 March 2023
  • WMS:GSSHA Hydraulic Structures
    ...tered by clicking the curve button to open the [[WMS:XY Series Editor|''XY Series Editor'' dialog]], which has a table of values representing the desired cur ...sus discharge values. Click the '''Rating Curve''' button to open the ''XY Series Editor'' dialog.
    9 KB (1,404 words) - 20:30, 24 April 2019
  • SMS:ADCIRC Coverages 13.0
    ...are specified either as tidal constituents for harmonic forcing or as time series or water level. ...Discharges are specified either for harmonic discharge forcing or for time series discharge forcing.
    20 KB (3,055 words) - 17:17, 5 April 2021
  • SMS:ADCIRC Coverages
    ...are specified either as tidal constituents for harmonic forcing or as time series or water level. ...Discharges are specified either for harmonic discharge forcing or for time series discharge forcing.
    22 KB (3,341 words) - 15:48, 28 March 2023
  • GMS:MODFLOW-USG Observations
    ...cess as does MODFLOW 2000, 2005, NWT, ect. When using MODFLOW-USG in GMS a series of PEST utilities are run to calculate the model computed values at observa ...ered into the ''DataTime'' field. Regardless of the format enter, the date time will be reformatted into the YYYY-MM-DD HH:MM:SS format.
    11 KB (1,745 words) - 14:31, 26 October 2017
  • SMS:CMS-Flow Model Control 13.0
    ===Time Control=== This section sets the starting time, duration and hydraulic time step. The ''Ramp duration'' defines the length of an incremental loading po
    24 KB (3,490 words) - 18:41, 5 April 2021
  • SMS:Reading a TUFLOW Simulation
    *END TIME &ndash; Set the simulation finish time in hours *NUMBER ITERATIONS &ndash; Specify the number of iterations per time step
    12 KB (2,013 words) - 14:53, 25 September 2017
  • WMS:HEC-HMS Gages
    ...s|'''Radar Data&rarr;Rain Gages''']] button and defining the grids and the time step associated with the grids. ...m precipitation values) and at least one temporal distribution station (XY series of precipitation values for the entire storm). [[Image:HMS_Gages3.jpg|thumb
    3 KB (470 words) - 16:23, 11 October 2017
  • WMS:Images
    ; Multiple Images : WMS now allows more than one image at a time, however most will want to insure that each image is in the same coordinate ...and registration points can be exported and read back into WMS at a later time.
    5 KB (839 words) - 19:58, 6 March 2023
  • WMS:WMS Non-native Files
    ...s a ''Digital Line Graph'' file to be imported and points connected into a series of arcs. USGS DLG files, like DEMs, can be downloaded via the Internet (see ...format. This format is used for importing and exporting time series and XY series data to and from HEC-RAS, HEC-HMS, and other HEC software.
    6 KB (1,032 words) - 15:42, 24 February 2016
  • WMS:Hydrographs
    ...from which it is read. While it may be convenient to read all indices each time, it may produce an overwhelming number of hydrographs and make the display ...iple hydrographs may be selected and overlaid in a plot window at the same time, and several different display options can be used while examining hydrogra
    8 KB (1,359 words) - 16:00, 31 January 2017
  • Tethys Publications
    ...Jiří, A. Woodruff Miller, and Daniel P. Ames. "Extracting Snow Cover Time Series Data from Open Access Web Mapping Tile Services." ''JAWRA Journal of the Am
    4 KB (471 words) - 22:24, 24 January 2017
  • SMS:CMS-Flow Model Control
    ===Time Control=== This section sets the starting time, duration and hydraulic time step. The ''Ramp duration'' defines the length of an incremental loading po
    25 KB (3,596 words) - 19:47, 17 March 2021
  • SMS:GenCade Graphical Interface
    ...Wave Gages|wave gage]] &ndash; the attributes of this point include a time series of [[SMS:Wave Gages|wave data]]. * Event &ndash; bypass or beach nourishment events and their time ranges and parameters.
    5 KB (785 words) - 15:13, 9 April 2019
  • SMS:SMS User Manual 12.1
    :[[SMS:Time Steps Window|Time Steps Window]] :[[SMS:Error vs. Time Step Plot|Error vs. Time Step Plot]]
    26 KB (3,579 words) - 20:26, 9 January 2023
  • WMS:Drawing Tools
    ...paper stacked on top of one another. Only one tool is active at any given time. ...gs to highlight key features in a plot. A line is created by clicking on a series of points on the screen with the mouse and double-clicking to end the line.
    8 KB (1,366 words) - 21:18, 12 December 2023
  • SMS:SMS User Manual 13.0
    :[[SMS:Time Steps Window|Time Steps Window]] :[[SMS:Error vs. Time Step Plot|Error vs. Time Step Plot]]
    26 KB (3,568 words) - 19:29, 9 January 2023
  • SMS:ADCIRC Wind Coverage
    ...presents a storm, such as a tropical depression or hurricane, as an arc or series of arcs that follow the storm track and define the storm attributes at the ...e in the storm's path. Each node then defines an offset from this starting time in hours (see below). Year, month, day and hour are important, while minute
    9 KB (1,465 words) - 15:47, 28 April 2023
  • SMS:TUFLOW AD
    ...s of day-1. This value is used in a first order decay calculations at each time step, i.e. Enter zero or blank if no decay is required. Clicking the curve button to the right will bring up an ''[[XY Series Editor]]'' dialog where the curve information can be entered.
    3 KB (486 words) - 16:59, 12 August 2019
  • SMS:SMS User Manual 12.3
    :[[SMS:Time Steps Window|Time Steps Window]] :[[SMS:Error vs. Time Step Plot|Error vs. Time Step Plot]]
    26 KB (3,598 words) - 20:20, 9 January 2023
  • SMS:SMS User Manual 12.0
    :[[SMS:Time Steps Window|Time Steps Window]] :[[SMS:Error vs. Time Step Plot|Error vs. Time Step Plot]]
    29 KB (3,960 words) - 20:35, 9 January 2023
  • SMS:Breaklines
    ...up of triangular elements or scatter set. In other words, a breakline is a series of edges to which the mesh or scatter triangles should conform to, i.e., no :'''''Note''''': Scatter breaklines must be imported at the same time as their corresponding scatter vertices.
    3 KB (330 words) - 15:13, 12 September 2017
  • SMS:SMS User Manual 12.2
    :[[SMS:Time Steps Window|Time Steps Window]] :[[SMS:Error vs. Time Step Plot|Error vs. Time Step Plot]]
    27 KB (3,630 words) - 20:30, 9 January 2023
  • SMS:SMS User Manual 11.2
    :[[SMS:Time Steps Window|Time Steps Window]] :[[SMS:Error vs. Time Step Plot|Error vs. Time Step Plot]]
    29 KB (3,953 words) - 20:48, 9 January 2023
  • WMS:What's new in WMS version 8.4
    ...ou to find and download data from the internet and to modify existing time series data.
    6 KB (892 words) - 14:28, 12 September 2016
  • WMS:WMS
    *[[WMS:Other Software|HY-8, HY-12, Hydraulic Toolbox, and the Time Series Editor]]
    5 KB (634 words) - 21:00, 26 May 2023
  • SMS:SMS User Manual 13.1
    :[[SMS:Time Steps Window|Time Steps Window]] :[[SMS:Error vs. Time Step Plot|Error vs. Time Step Plot]]
    27 KB (3,677 words) - 19:26, 9 January 2023
  • SMS:SMS User Manual 13.2
    :[[SMS:Time Steps Window|Time Steps Window]] :[[SMS:Error vs. Time Step Plot|Error vs. Time Step Plot]]
    27 KB (3,714 words) - 17:11, 28 March 2023
  • SMS:CMS-Flow Cell Attributes
    ...epresents an observation station. CMS-Flow can output calculations of time series (water elevation and velocities), flow rate and transport at the cell.
    3 KB (492 words) - 19:08, 24 August 2017
  • SMS:SMS User Manual 13.3
    :[[SMS:Time Steps Window|Time Steps Window]] :[[SMS:Error vs. Time Step Plot|Error vs. Time Step Plot]]
    28 KB (3,788 words) - 20:24, 16 November 2023
  • SMS:SRH-2D Channel Calculator
    ...up a ''Select Tree Item'' dialog where an elevation dataset as well as any time steps in the dataset can be chosen. Note that the unit system selected on t ...e variables will be automatically entered for the rating curve in the ''XY Series Editor'' when exiting this dialog.
    5 KB (791 words) - 18:13, 4 April 2024
  • WMS:WMS User Manual 11.0
    :[[WMS:XY Series Editor|XY Series Editor]] :[[WMS:Colorado State Lag Time Equation|Colorado State Lag Time Equation]]
    22 KB (2,908 words) - 23:03, 9 January 2023
  • WMS:WMS User Manual 11.1
    :[[WMS:XY Series Editor|XY Series Editor]] :[[WMS:Colorado State Lag Time Equation|Colorado State Lag Time Equation]]
    22 KB (2,917 words) - 21:07, 6 February 2023
  • WMS:WMS User Manual 11.2
    :[[WMS:XY Series Editor|XY Series Editor]] :[[WMS:Colorado State Lag Time Equation|Colorado State Lag Time Equation]]
    22 KB (2,928 words) - 21:31, 21 November 2023
  • WMS:WMS User Manual 10.1
    :[[WMS:XY Series Editor|XY Series Editor]] :[[WMS:Colorado State Lag Time Equation|Colorado State Lag Time Equation]]
    22 KB (2,974 words) - 23:02, 9 January 2023
  • SMS:SRH-2D Errors
    ...used to define inflows/outflows, time varying water surface elevations, or time varying roughness has issues with how it is defined, such as duplicate time ...eries data is defined for the boundary conditions and remove any duplicate time entries.
    25 KB (4,119 words) - 23:15, 22 February 2024
  • WMS:WMS User Manual 10.0
    :[[WMS:XY Series Editor|XY Series Editor]] :[[WMS:Colorado State Lag Time Equation|Colorado State Lag Time Equation]]
    23 KB (3,071 words) - 22:58, 9 January 2023
  • SMS:BOUSS-2D Graphical Interface
    ...es|'''Probe Manager''']] : Brings up the ''Probe Manager'' to control time series output from the model. ...the options that apply to the simulation as a whole. These options include time controls, run types, output options, global parameters, print options and o
    14 KB (2,143 words) - 20:46, 19 July 2019
  • SMS:Convert Elements
    ...riangles. Doing this manually for large numbers of elements takes a lot of time. The '''Merge Triangles''' command from the [[SMS:2D_Mesh_Elements_Menu|''E ...elements that can be merged. Then, a series of steps are performed, each time lowering the feature angle and checking for elements that can be merged. T
    6 KB (916 words) - 15:37, 24 August 2018
  • SMS:SMS User Manual 11.1
    :[[SMS:Time Steps Window|Time Steps Window]] :[[SMS:Error vs. Time Step Plot|Error vs. Time Step Plot]]
    33 KB (4,655 words) - 20:51, 9 January 2023
  • SMS:WAM Graphical Interface
    ...model process that can be reviewed in a text editor. It also outputs three series of solution files. Each of these includes a particular type of output for a * Restart### &ndash; A series of files which contain information to restart the simulation at a specific
    10 KB (1,710 words) - 19:57, 30 September 2022
  • WMS:MWBM Wizard
    ***"Time Computation" *'''Pumping Curves...''' &ndash; Brings up the [[WMS:XY Series Editor|''XY Series Editor'' dialog]]. Allows the user to manually create any number of pumping
    23 KB (3,644 words) - 20:28, 22 March 2019
  • WMS:WMS User Manual 9.1
    :[[WMS:XY Series Editor|XY Series Editor]] :[[WMS:Colorado State Lag Time Equation|Colorado State Lag Time Equation]]
    25 KB (3,355 words) - 22:56, 9 January 2023
  • GMS:Observations
    ...Process. Computed values at observations for MODFLOW-USG are handled by a series of PEST utilities. The input to these utilities is created in the [[GMS:MOD ...s the point name, the point's xy coordinates, and the number of calculated time steps that are printed for it.
    8 KB (1,287 words) - 18:09, 1 September 2023
  • SMS:GenCade Modeling Process
    * Initial shoreline definition &ndash; This is series of points ((x,y) or (lat,lon)) that define a reference position for the coa ...conditions include the wave parameters (height, period, direction) at each time step in the simulation. The direction of each wave condition must be provid
    4 KB (582 words) - 16:42, 22 September 2017
  • GMS:MODFLOW 6
    ...d'' &ndash; Determines how many processes can be active in GMS at the same time. A simulation may contain multiple processes. ...tes that the model input check routines should not be called prior to each time step.
    15 KB (2,309 words) - 23:00, 6 May 2024
  • GMS:MODFLOW Packages Supported in GMS
    [[GMS:MODFLOW|MODFLOW]] is divided into a series of components called "packages." Each package performs a specific task. The ...|| align ="left" | Used to specify the grid dimensions, the computational time steps, and an array identifying which packages are to be used.|| align ="ce
    19 KB (2,745 words) - 23:14, 22 January 2024
  • SMS:Model Specific Coverages
    ...ts]] &ndash; Used to gather specific information for that location at all time steps. ...vanced) Coverage|2D Z Lines (advanced)]] &ndash; Modifies geometry through time to simulate levee failures or other changes to elevation data within the mo
    7 KB (1,053 words) - 20:07, 10 August 2021
  • SMS:CMS-Flow Graphical Interface
    For CMS-Flow, a cell string consists of a series of contiguous or adjacent cells. This means the cells share at least a corn ...ll string. Multiple cell strings may be selected and assigned at the same time, but this is not common. Typically, the boundary conditions will only be a
    10 KB (1,677 words) - 14:25, 17 June 2019
  • SMS:Release Notes SMS 12.0
    **8263 - SRH-2D Time Series Option Displaying when it should not be displayed *8191 SMS automatically cycles through time steps of BOUSS2D WSE Animation output dataset
    10 KB (1,383 words) - 23:46, 9 January 2023
  • SMS:Contour Options
    The name, minimum value, and maximum value for the active time step of the dataset are shown. These values are sometimes useful when choos ...cally choose a range based on the minimum and maximum value for the active time step.
    13 KB (2,037 words) - 20:50, 28 July 2023
  • SMS:2D Mesh Files *.2dm
    |Colspan="3"|Identifies the model time units. |Colspan="3"|Identifies the model time step and total simulation time.
    45 KB (6,007 words) - 16:00, 26 September 2017
  • SMS:SRH-2D Files
    |XYS||Input files for XY Series of data including: *BC Flow time series
    21 KB (2,926 words) - 23:28, 11 January 2024
  • GMS:MODFLOW Conceptual Model Approach
    ...modeler to evaluate numerous alternative conceptual models in the space of time normally required to evaluate one, resulting in a more accurate and efficie ...cell that it crosses. The temptation is to select small groups of cells in series and apply the same values to all of the cells in the group. This results in
    11 KB (1,752 words) - 16:54, 28 November 2017
  • WMS:HEC-HMS Properties
    Groundwater 1 Coeff (hr) &ndash; Represents the amount of time lag due to the transformation of stored water becoming lateral outflow. Groundwater 2 Coeff (hr) &ndash; Represents the amount of time lag due to the transformation of stored water becoming lateral outflow (Gen
    44 KB (6,812 words) - 19:08, 1 April 2020
  • SMS:CGWAVE Practical Notes
    ...of thousands of nodes. This is not a problem physically, but can be very time consuming to simulate. For spectral conditions, the domain size should be ...), are met; typically it is sufficient to specify 15 terms in the infinite series. For harbor problems, SMS will create the 1d sections based on depths base
    9 KB (1,416 words) - 17:12, 20 September 2017
  • GMS:Interpolation
    ...polynomial is defined over each triangle, creating a surface made up of a series of triangular Clough-Tocher surface patches. ...selected interpolation scheme. Each point in the set is processed one at a time. The point is temporarily removed and the selected interpolation scheme is
    5 KB (720 words) - 17:19, 9 June 2022
  • SMS:ALT Key Model Navigation
    | ''A'' || ''T'' || [[SMS:ADH#ADH Menu|''ADH'']] | '''Time Series Data'''
    11 KB (1,319 words) - 15:09, 28 October 2016
  • SMS:ADCIRC Model Control 13.0
    * ''Timing'' &ndash; Defines simulation run time, start time, and time step options ...ion'' (NCOR) &ndash; The type of Coriolis forcing used does not impact run time for ADCIRC at all. A drop-down with the following two options:
    159 KB (22,570 words) - 18:42, 5 April 2021
  • SMS:TUFLOW FV Model Control
    ...display interval'' &ndash; Option to set the interval in seconds at which time step information will be displayed to the log and terminal window. ...Display interval'' &ndash; Sets the interval in seconds for the display of time step information.
    37 KB (5,684 words) - 17:18, 28 March 2023
  • SMS:PTM
    ...last step trap is checked, the traps will not become active until the last time step. * [[SMS:PTM Gage Coverage|PTM Gage Coverage]] &ndash; Used to view time series of output data computed by the PTM engine.
    9 KB (1,300 words) - 21:21, 27 April 2023
  • WMS:GSSHA Automated Calibration
    ...s not necessary to associate a rainfall event with each observed data time series. ...based calibration, associate weights with each observation value in the XY series by clicking on the '''Weights''' button in the observation window and defin
    19 KB (2,825 words) - 22:49, 7 July 2020
  • GMS:Editing 2D Meshes
    #The set of elements to be processed is traversed one element at a time. Each triangular element that is found is compared with each of its three a ...Palette]]. This tool can be used to manually merge triangles one pair at a time rather than using the automatic scheme described above.
    10 KB (1,713 words) - 21:17, 15 March 2022
  • GMS:GMS 9.1 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    19 KB (2,468 words) - 18:55, 5 May 2022
  • GMS:GMS 9.2 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    19 KB (2,512 words) - 18:55, 5 May 2022
  • SMS:SRH-2D Structures
    The way that SMS references the HY-8 file has changed over time. In version 13.0, the user would have to pick an existing HY-8 file for eac ...mulations which use culverts defined in that file are launched at the same time, the simulations could fight over the right to launch HY-8 to create the ta
    35 KB (5,402 words) - 16:46, 25 January 2024
  • GMS:Coverages
    ...change throughout the time step, rather than just at the beginning of the time step. ...ith time (i.e. river, head will not be affected by the model stresses with time).
    16 KB (2,620 words) - 19:19, 10 November 2023
  • SMS:ADCIRC Tutorial
    !Prerequisites !! Requirements !! Time ...turn off the scatterpoint display. However, you may turn it back on at any time during the tutorial if you so desire. To turn off the visibility of the shi
    27 KB (4,422 words) - 22:34, 10 April 2013
  • GMS:MF6 GWF-GWF Exchange
    ...ge flow rates will be printed to the listing file, for every stress period time step where “SAVE BUDGET” has been specified in Output Control. {{MF6 Time Series Files Dialog}}
    12 KB (1,969 words) - 21:05, 30 March 2023
  • GMS:GMS 10.0 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    21 KB (2,781 words) - 19:02, 5 May 2022
  • WMS:HSPF Modules
    ...an '''External Targets''' button that leads to a dialog where output time series to be generated by HSPF can be assigned to WDM datasets (Section 4.6.5 &nda ...which module input parameters will be copied. This can greatly reduce the time and effort necessary to develop the input for an HSPF run. The layout and u
    25 KB (3,895 words) - 15:49, 12 October 2017
  • SMS:ADCIRC Model Control
    * ''Timing'' &ndash; Defines simulation run time, start time, and time step options ...ion'' (NCOR) &ndash; The type of Coriolis forcing used does not impact run time for ADCIRC at all. A drop-down with the following two options:
    155 KB (21,982 words) - 19:50, 17 March 2021
  • GMS:GMS 10.1 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    22 KB (2,850 words) - 18:55, 5 May 2022
  • GMS:GMS 10.2 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    22 KB (2,917 words) - 18:56, 5 May 2022
  • WMS:WMS 8.1 Dialog Help
    * [[WMS:CE-QUAL-W2|Time Step]] | 4555 | IDD_CEQUAL_TIMESTEPJOBCONTROL * [[WMS:Travel Times from Basin Data|Basin Time Computation]] | 4391 | IDD_HEC1_BASINCOMPUTATION
    22 KB (2,627 words) - 22:23, 27 January 2020
  • GMS:GMS 10.3 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    23 KB (3,074 words) - 18:59, 5 May 2022
  • GMS:Editing a 3D Mesh
    ...d by sweeping outward from the selected region, one layer of elements at a time, until the entire mesh is renumbered. The results of the renumbering proces
    9 KB (1,439 words) - 15:06, 26 April 2016
  • WMS:HSPF
    ...ets''' &ndash; Opens the [[WMS:HSPF WDM File Interaction|''Select WDM Time Series'']] dialog.
    8 KB (1,258 words) - 15:27, 6 February 2017
  • GMS:GMS 10.4 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    24 KB (3,114 words) - 18:59, 5 May 2022
  • SMS:Release Notes SMS 11.1
    *7280 Fixed a Time Series Issue *7144 - Fixed ADCIRC elevation forcing time interval
    23 KB (3,874 words) - 23:46, 9 January 2023
  • GMS:GMS 11.0 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    24 KB (3,125 words) - 20:02, 1 September 2022
  • Blog Post Directory
    | modflow, xy series, stress periods, transient data | gravity waves courant number, gravity waves time step, coastal
    58 KB (6,637 words) - 20:07, 7 May 2024
  • HY8:Differences from DOS HY-8
    The MS-DOS versions of HY-8 presented the input as a series of linear input screens. The order always began with the discharge, follow ...acing tables and graphs within document text. In this first version, each time a table or graph is saved a new page is started. This is because of a limi
    7 KB (1,245 words) - 16:26, 28 February 2018
  • GMS:GMS User Manual 10.3
    :[[GMS:Time Settings|Time Settings]] :[[XY Series Editor|XY Series Editor]]
    19 KB (2,595 words) - 22:09, 9 January 2023
  • GMS:GMS User Manual 10.4
    :[[GMS:Time Settings|Time Settings]] :[[XY Series Editor|XY Series Editor]]
    19 KB (2,660 words) - 22:07, 9 January 2023
  • GMS:GMS 10.5 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    26 KB (3,476 words) - 19:01, 5 May 2022
  • GMS:Borehole Cross Sections
    ...tops and bottoms of cross sections to TIN surfaces can also be done at any time via the ''Boreholes'' | ''Advanced'' | '''Snap Cross Sections to TIN''' men ...on Editor''' command from the ''Borehole'' menu while either a single or a series of cross sections selected. It is also possible to launch the ''Cross Secti
    10 KB (1,510 words) - 20:29, 20 February 2023
  • GMS:GMS User Manual 10.5
    :[[GMS:Time Settings|Time Settings]] :[[XY Series Editor|XY Series Editor]]
    20 KB (2,836 words) - 22:07, 9 January 2023
  • WMS:WMS Dialog Help
    * [[WMS:CE-QUAL-W2|Time Step]] | 4555 | IDD_CEQUAL_TIMESTEPJOBCONTROL * [[WMS:Travel Times from Basin Data|Basin Time Computation]] | 4391 | IDD_HEC1_BASINCOMPUTATION
    24 KB (2,949 words) - 22:22, 27 January 2020
  • GMS:GMS 10.6 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    29 KB (3,958 words) - 21:11, 12 October 2022
  • GMS:GMS 10.7 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    29 KB (4,005 words) - 15:05, 30 March 2023
  • GMS:GMS User Manual 10.6
    :[[GMS:Time Settings|Time Settings]] :[[XY Series Editor|XY Series Editor]]
    21 KB (3,002 words) - 22:03, 9 January 2023
  • GMS:GMS User Manual 10.7
    :[[GMS:Time Settings|Time Settings]] :[[XY Series Editor|XY Series Editor]]
    22 KB (3,017 words) - 19:30, 29 March 2023
  • WMS:WMS 11.0 Dialog Help
    * [[WMS:CE-QUAL-W2|Time Step]] | 4555 | IDD_CEQUAL_TIMESTEPJOBCONTROL * [[WMS:Travel Times from Basin Data|Basin Time Computation]] | 4391 | IDD_HEC1_BASINCOMPUTATION
    25 KB (3,064 words) - 22:24, 27 January 2020
  • WMS:WMS 11.1 Dialog Help
    * [[WMS:CE-QUAL-W2|Time Step]] | 4555 | IDD_CEQUAL_TIMESTEPJOBCONTROL * [[WMS:Travel Times from Basin Data|Basin Time Computation]] | 4391 | IDD_HEC1_BASINCOMPUTATION
    25 KB (3,075 words) - 19:58, 1 September 2022
  • SMS:Release Notes SMS 11.0
    ...r particle trace animation, some of the particles were not getting the new time step data. This has been resolved. #Added support for “TD Card” (the global time step) when converting SMS 10.1 generic model templates to SMS 11.0 format.
    24 KB (3,926 words) - 23:46, 9 January 2023
  • WMS:WMS 11.2 Dialog Help
    * [[WMS:CE-QUAL-W2|Time Step]] | 4555 | IDD_CEQUAL_TIMESTEPJOBCONTROL * [[WMS:Travel Times from Basin Data|Basin Time Computation]] | 4391 | IDD_HEC1_BASINCOMPUTATION
    25 KB (3,079 words) - 18:13, 16 May 2023
  • GMS:GMS 99.99 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    31 KB (4,278 words) - 20:34, 8 March 2024
  • GMS:GMS 10.8 Dialog Help
    # [[GMS:Basic Transport Package Dialog#Stress Periods|Initialize MT3DMS Time Steps]] | 131 | IDD_MT_INIT_TIMESTEPS # [[XY Series Editor|XY Series Editor]]| 500 | IDD_XYSERIES
    32 KB (4,300 words) - 20:29, 8 March 2024
  • GMS:GMS User Manual 10.8
    :[[GMS:Time Settings|Time Settings]] :[[XY Series Editor|XY Series Editor]]
    22 KB (3,073 words) - 19:37, 3 May 2024
  • SMS:SMS 11.2 Dialog Help
    # [[SMS:Plot Window#Time Settings Options|Time Settings Options]] | 193 | IDD_PLOTWIZ2_TIMESERIES # [[XY Series Editor|XY Series Editor]] | 245 | IDD_XYSERIES
    56 KB (7,016 words) - 18:35, 5 May 2022
View (previous 250 | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://www.xmswiki.com/wiki/Special:Search"