Search results

From XMS Wiki
Jump to navigationJump to search

Page title matches

Page text matches

  • WMS:Attributes
    #redirect [[WMS:Feature Objects Menu#Attributes]]
    49 bytes (6 words) - 16:28, 3 December 2014
  • SMS:Attributes in Feature Objects Menu
    #REDIRECT [[SMS:Attributes in the Feature Objects Menu]]
    56 bytes (8 words) - 22:16, 6 October 2015
  • SMS:Attributes (Feature Objects Menu)
    #REDIRECT [[SMS:Attributes in the Feature Objects Menu]]
    56 bytes (8 words) - 15:05, 15 June 2016
  • SMS:TABS Attribute Dialog
    ==TABS Point Attributes Dialog== [[Image:TABS Feature Point.png|thumb|200 px|''TABS Feature Point/Node Options'' dialog]]
    2 KB (248 words) - 16:36, 11 May 2020
  • SMS:FESWMS Attributes Dialog
    {{SMS Deprecated Feature}} The FESWMS map coverage allows attributes to be set for arcs and points.
    2 KB (294 words) - 14:19, 10 June 2019
  • SMS:Mapping Coverage
    ...is a [[SMS:Generic Coverages|generic coverage]] used for building feature objects for conversion to a scatter set. ==Mapping Arc Attributes Dialog==
    2 KB (284 words) - 15:56, 31 August 2017
  • GMS:Converting GIS Data to Other Data Types
    ...uch as shapefiles, can be converted to other data types including: feature objects, 2D scatter points, 3D scatter points, and unstructured grids. ...ject Explorer]] and selecting the ''Convert To'' submenu. Commands in this menu include:
    1 KB (185 words) - 15:00, 10 June 2016
  • WMS:General Coverage
    ...). The general coverage provides a way to examine feature objects when the attributes are uncertain or unknown. ...direction of the arc does not need to be considered. Later, these feature objects can be converted to other coverages or data types.
    2 KB (270 words) - 15:33, 29 September 2017
  • WMS:Feature Objects to Geodatabase
    ...o ArcObjects#Enabling ArcObjects|enable ArcObjects]]. WMS uses the feature objects stored in each coverage to build the geodatabase. ...ate system for the project. Vector data are stored in feature datasets and feature classes in the geodatabase which require a common spatial reference. The sp
    2 KB (333 words) - 15:33, 31 January 2017
  • WMS:Runoff Coefficient
    ...ed using the '''Compute GIS Attributes''' command in the '''Calculators''' menu of the Hydrologic Modeling module. * [[WMS:Feature Objects|Feature Objects]]
    604 bytes (89 words) - 17:44, 8 May 2023
  • WMS:Drainage Module Feature Objects
    ...ature object then selecting '''Attributes''' from the ''Feature Objects'' Menu. ==Feature Arc Type==
    3 KB (432 words) - 21:22, 12 December 2023
  • SMS:Refine Point Dialog
    ...nt in a Cartesian grid coverage and selecting the ''Feature Objects'' | '''Attributes''' command. Attributes that can be specified for each refine point include:
    2 KB (284 words) - 20:50, 17 October 2019
  • SMS:Converting Coverages
    * [[SMS:Converting Feature Objects#Map to 2D Mesh|'''Map → 2D Mesh''']] – Available with the [[SMS: * [[SMS:Converting Feature Objects#Map to 2D Grid|'''Map → 2D Grid''']] – Available with the [[SMS:
    3 KB (400 words) - 20:33, 30 November 2017
  • SMS:GenCade Arc Attributes
    [[Image:GenCade Arc Attributes.png|thumb|225 px|''GenCade Arc Attributes'' dialog]] ...ck menu or selecting '''Attributes''' command from the ''Feature Objects'' menu.
    3 KB (418 words) - 16:57, 10 July 2019
  • SMS:Refine Attributes Dialog
    [[Image:Refine Attributes.png|thumb|225 px|Example of the ''Refine Attributes'' dialog]] ...by right-clicking on a point in the Map module and selecting the '''Refine Attributes''' command. This option is only available if the active coverage is a 2D Me
    2 KB (287 words) - 16:32, 19 September 2017
  • WMS:Mapping to Feature Objects
    ...nts, lines, polygons) that overlay the study area and map those to feature objects in a map coverage. ...s through the process of converting the GIS data layer features to feature objects in a map coverage. Before beginning the mapping process, first go to the ma
    3 KB (528 words) - 17:28, 2 October 2017
  • WMS:DEM Menu
    The ''DEM'' menu contains the following options: ...dit Elevations''' – Used in conjunction with a selected DEM point or feature arc. See [[WMS:Editing DEM Elevations|Editing DEM Elevations]] for more inf
    3 KB (440 words) - 22:08, 16 December 2019
  • SMS:ADCIRC Coverage 12.3 and earlier
    {{SMS Deprecated Feature}} ...of coastline. Closed polylines are converted to arcs and are assigned the attributes of islands.
    3 KB (494 words) - 14:25, 17 June 2019
  • SMS:ALT Key Module Navigation
    |+ ''Feature Objects'' Menu ''ALT'' Key Navigation ! Menu Key !! Command Key !! Command
    16 KB (1,914 words) - 18:39, 5 May 2022
  • SMS:GENESIS Graphical Interface
    {{SMS Deprecated Feature}} ...e saved separately using the ''File | Save GENESIS'' or ''File | Save As'' menu commands. See GENESIS Files for more information on the files used for the
    2 KB (322 words) - 14:44, 4 June 2019
  • WMS:MODRAT Tc Coverage Type
    ...tributes''' from the ''Feature Objects'' menu, or double-click on the arc. Feature arcs created in the Modrat Tc coverage can have the following conveyance ty * [[WMS:Feature Objects|Feature Objects]]
    2 KB (252 words) - 14:56, 17 May 2017
  • SMS:Attributes in the Feature Objects Menu
    ...ic selected feature object in relation to the coverage type containing the feature object. == Feature Point Attributes ==
    10 KB (1,307 words) - 15:41, 11 December 2018
  • SMS:2D Mesh Options Dialog
    {{SMS Deprecated Feature}} ...meshing polygon must have been defined prior to issuing this command. The attributes of the meshing polygon(s) are used to generate the 2D mesh.
    2 KB (297 words) - 14:06, 12 June 2019
  • SMS:Patch
    ...s represent intermediate points along the arc ([[SMS:Feature Objects Types|feature vertices]]). The basic process to define the meshing attributes for a polygon using the Patch method is to:
    3 KB (519 words) - 19:17, 8 April 2020
  • GMS:Map to Models
    The ''Map → Model'' dialog provides a few options for how feature objects in Map module will be converted. *''Active coverage only'' – Only feature objects in the current active coverage will be converted to the model.
    3 KB (463 words) - 14:53, 15 August 2017
  • GMS:GIS Commands
    ...tion Method'' submenu. The following commands are available in the ''GIS'' menu: ...to feature objects using the [[GMS:GIS to Feature Objects|''GIS to Feature Objects'']] wizard.
    4 KB (660 words) - 20:26, 29 March 2022
  • WMS:Soil Type Coverage
    ...'Soil Type Mapping'' dialog from the ''Feature Objects'' menu using the '''Attributes''' command, and then create new IDs and enter parameters for each ID. Secon ...and then choosing the '''Attributes''' command from the ''Feature Object'' menu (or by double-clicking on the polygon) and choosing the appropriate ID from
    3 KB (500 words) - 21:56, 18 December 2019
  • SMS:Map Module
    ...es a line or polyline. Areas enclosed by polylines can be classified as a feature polygon. ...e the list of coverage types to learn about the attributes associated with objects in that specific coverage.
    7 KB (1,106 words) - 21:38, 17 March 2022
  • SMS:SMS User Manual vol. 2
    :[[SMS:Cartesian Grid Data Menu|Cartesian Grid Data Menu]] :[[SMS:GIS to Feature Objects Wizard|GIS to Feature Objects Wizard]]
    7 KB (981 words) - 18:36, 5 May 2022
  • SMS:PTM Graphical Interface
    == PTM Menu == The following menu commands are available in the [[SMS:PTM|''PTM'']] Menu:
    3 KB (534 words) - 15:48, 13 September 2017
  • SMS:Map Feature Objects Menu
    The ''Feature Objects'' Menu includes the following commands: ...:Feature Object Modification: All|'''Delete''']] : Deletes all the feature objects in an SMS session and creates a new blank coverage (since SMS requires an a
    6 KB (976 words) - 16:35, 17 March 2022
  • WMS:GIS Tools
    ...[[WMS:GIS Module|GIS module]] has a variety of tools useful for selecting objects and obtaining information about them. The tools are described below. ...By default, with ArcObjects® enabled, only the attributes of the selected feature in the top most layer (as displayed in the WMS Project Explorer) are displa
    3 KB (529 words) - 14:22, 1 May 2018
  • WMS:Land Use Coverage
    ...''Land Use Mapping'' dialog from the ''Feature Objects'' menu using the '''Attributes''' command, and then create new IDs and enter parameters for each ID. Seco ...and then choosing the '''Attributes''' command from the ''Feature Object'' menu (or by double-clicking on the polygon) and choosing the appropriate ID from
    3 KB (520 words) - 15:46, 10 January 2024
  • GMS:Feature Object Display Options
    ...op-down menu on the top right of the dialog. The options in this drop-down menu change according to the coverages present in the project. Note that viewing ...ing the fields on the right side of the dialog. However, for the ''Nodes'' feature object type, the options are accessed through the box to the right of the N
    7 KB (1,092 words) - 19:32, 26 April 2022
  • WMS:Storm Drain
    ...select the '''Map→1D Schematic''' menu item from the ''Storm Drain'' menu to generate a [[WMS:Hydraulic Modeling#Hydraulic Schematic|hydraulic schema #Select the '''Map to 1D Schematic''' menu item
    5 KB (866 words) - 16:25, 3 January 2019
  • WMS:Drawing Tools
    ...ive module when the Map, Terrain, or Drainage modules are activated. These objects are created in layers, like sheets of paper stacked on top of one another. ...e color, line style, and arrowhead options of a line are edited with the ''Attributes'' dialog.
    8 KB (1,366 words) - 21:18, 12 December 2023
  • WMS:OC Unit Hydro Using GIS Data
    ...y choosing the '''Compute GIS Attributes''' command on the ''Calculators'' menu or by clicking on the '''Compute Losses''' button in the [[WMS:OC Unit Hydr # [[WMS:Mapping to Feature Objects|Map GIS data to feature objects]], if necessary
    2 KB (313 words) - 15:11, 16 October 2017
  • GMS:Feature Object Tool Palette
    ...nly available when the Map module is active. The table below describes the feature object tools. ...it Window'']]. Double-clicking on a object with this tool brings up that ''Objects Attribute'' dialog.
    6 KB (948 words) - 20:51, 18 July 2022
  • WMS:Map Tools
    ...Module|Map module]] has a variety of tools useful for editing and creating objects within that module. The tools are described below. ...svg|8 px]] tool is a generic selection tool that can be used to select any feature object (arcs, polygons, points, etc.) without having to change the tool. Th
    5 KB (846 words) - 20:45, 17 December 2019
  • SMS:Coverages
    ...ype, which determines the attributes that can be associated with geometric objects in that coverage. The coverages are grouped into conceptual models. The ty ...e could be used to define zones of consistent roughness parameters. These objects could not be included in a single coverage since polygons within a coverag
    6 KB (962 words) - 19:26, 20 December 2022
  • WMS:Define and Smooth Streams
    ...he channel depth elevation entered in the [[WMS:GSSHA Feature Arcs|''GSSHA Feature Arc Type'' dialog]]). ...After this tool is selected, select one or more stream arcs and edit the attributes or smooth the selected stream arcs.
    2 KB (348 words) - 19:55, 4 May 2020
  • SMS:Area Property Coverage
    ...als are assigned a name, color and pattern for display, and model specific attributes. ...obal list of material attributes is maintained and can be edited using the menu command ''Edit'' | '''Materials Data'''. This command brings up the [[SMS:M
    2 KB (364 words) - 15:07, 11 September 2019
  • WMS:Feature Objects
    ...each coverage defining a particular set of information. The use of feature objects is determined by the coverage, or attribute set, to which they belong, but == Feature Object Types ==
    5 KB (734 words) - 15:36, 28 September 2017
  • SMS:Feature Objects Types
    ...information for the objects. Since feature objects are patterned after GIS objects, it is possible to import data from GIS applications such as [[SMS:shapefi The primary use of feature objects is generate high level conceptual representations of a site. The area incl
    6 KB (942 words) - 16:26, 19 September 2017
  • SMS:Coastline Files *.cst
    ...type [[SMS:Coverages|coverages]]. When a Coastline file is read into SMS, feature arcs are created. If a coastline closes, the final point is not repeated. I ...the menu [[SMS:File Menu|''File'' | '''Open''']] and saved from [[SMS:File Menu|''File ''| '''Save As...''']] from the [[SMS:Map Module|Map module]].
    2 KB (230 words) - 16:05, 26 September 2017
  • SMS:CGWAVE Boundary Conditions Dialog
    ...''' command in the [[SMS:CGWAVE Graphical Interface#CGWAVE Menu|''CGWAVE'' menu]]. Before assigning boundary conditions to nodestrings, at least one nodest ...ean''' – Delineate the region where waves will enter the domain. The attributes of the waves that enter the domain are defined as incident wave characteris
    2 KB (313 words) - 14:57, 3 July 2019
  • WMS:Feature Objects Menu
    The ''Feature Objects'' menu has the following commands: The '''Delete''' command will delete all feature objects and any unsaved data.
    10 KB (1,698 words) - 21:18, 17 December 2019
  • WMS:WMS User Manual vol. 2
    :[[WMS:DEM Menu|DEM Menu]] :[[WMS:DEM Point Attributes|DEM Point Attributes]]
    8 KB (1,104 words) - 22:12, 18 December 2019
  • WMS:Coverages
    ...and another coverage could be used to define land use or soil zones. These objects could not be included in a single coverage since polygons within a coverage ...rage. New feature objects are always added to the active coverage and only objects in the active coverage can be edited. The figure below shows several covera
    5 KB (704 words) - 19:44, 8 May 2023
  • SMS:Map Module Tools
    ...'' {{Anchor|Select Feature Point|Select Feature Objects|Select Tool|Select Objects}} ...he right-click menu changes to match the selected object type. If multiple feature object types are selected, then the right-click menus will be combined.
    15 KB (2,481 words) - 22:00, 30 August 2023
  • SMS:GIS Module
    *vector data (vector objects) *GIS objects (data recognized as being native to ArcInfo, MapInfo, QGIS)
    7 KB (1,104 words) - 14:37, 9 April 2018
  • GMS:Feature Objects
    ...ssible to [[GMS:Importing/Exporting Shapefiles|import and export]] feature objects to a GIS program such as Arc/Info or ArcView. ...GMS:MT3DMS|MT3DMS]], [[GMS:RT3D|RT3D]], and [[GMS:SEAM3D|SEAM3D]]. Feature objects are also used to construct cross sections.
    10 KB (1,739 words) - 17:44, 15 June 2022
  • WMS:TR-20 Basin Data
    ...or ''DEM'' Drainage module menus, or in the ''Feature Objects'' Map module menu. If a TIN, DEM, or map data are not present, areas and slopes must be enter '''''NOTE''''': [[WMS:Compute GIS Attributes|Composite curve numbers can be computed automatically]] using a [[WMS:Land
    5 KB (784 words) - 17:18, 9 June 2023
  • WMS:GSSHA Feature Nodes
    ...The ''Properties'' dialog allows modification of the various attributes of feature arcs. ...oints and nodes in GSSHA lists the various attributes associated with each feature point or note.
    6 KB (1,029 words) - 22:06, 7 July 2020
  • WMS:GSSHA Streamflow Workflow
    :#Set the stream arcs to a [[WMS:GSSHA Feature Arcs|GSSHA stream arc]] type. :#Open '''Attributes...''' under the Feature Objects menu and enter the necessary data.
    2 KB (264 words) - 20:08, 3 May 2023
  • WMS:Project Explorer Contents for GIS Module
    ...difying, and converting attributes and geometry from shapefiles to feature objects in the map module of WMS. ...t, line, or polygon shapefile type so the data can be converted to feature objects and used in the hydrologic modeling projects. When selecting the [[Get_Onl
    10 KB (1,537 words) - 20:36, 23 January 2019
  • WMS:GSSHA Roughness Workflow
    ...essary data to the Land Use coverage. This may include shapefiles, feature objects, etc.. :#Open '''Maps...''' under the GSSHA menu.
    2 KB (223 words) - 19:28, 3 May 2023
  • SMS:GIS Module Menus
    Most of the SMS modules have a ''Data'' menu, but the items in this menu are different for each module. The [[SMS:GIS Module|GIS Module]] commands ...rs, as GIS data layers in SMS. These data can then be converted to feature objects in map coverages.
    15 KB (2,341 words) - 20:55, 22 March 2022
  • SMS:Edit Menu
    ...used to select objects, delete objects, and set basic object and material attributes. ...ts are selected when the '''Delete''' command is executed, then all of the objects of the tool selection type will be deleted. Unless the ''Confirm Deletions'
    7 KB (1,079 words) - 22:28, 26 March 2024
  • WMS:ArcView Data Guidelines
    ...S:Importing Shapefiles|key words]] can be used to define the item names of attributes in the shapefile so that mapping to corresponding variables in WMS occurs a ...a layer defining basin boundaries then construct a network using feature objects in WMS which properly connects the basin polygons together. This stream net
    4 KB (685 words) - 15:47, 2 February 2016
  • WMS:Feature Selection
    ...nselectable using the '''Selectable Layers''' command in the ''Selection'' menu. Features of a layer can also be selected based on a query of the attributes and their values. The ''Query Wizard'' is used to choose the layer to selec
    2 KB (393 words) - 17:31, 2 October 2017
  • GMS:Importing/Exporting Shapefiles
    ...center>||This is a relational database file. The properties of the feature objects are stored in this file. Shapefiles are imported to GMS using '''Open''' command in the ''File'' menu and selecting the *.shp extension. Drag-and-drop is also supported. Shapefi
    8 KB (1,243 words) - 15:32, 29 November 2017
  • SMS:Cartesian Grid Data Menu
    Most of the SMS modules have a ''Data'' menu, but the items in this menu are different for each module. The Cartesian grid module ''Data'' menu commands include:
    7 KB (1,160 words) - 20:10, 22 March 2022
  • SMS:SMS User Manual vol. 1
    :[[SMS:File Menu|File Menu]] :[[SMS:Edit Menu|Edit Menu]]
    13 KB (1,678 words) - 18:36, 5 May 2022
  • WMS:Time Computation
    ...ed flow, and open channel flow. The dialog shown is used to assign the arc attributes and corresponding values for the parameters of the equation so that a trave There are no point/node or polygon attributes in Time Computation coverages.
    13 KB (2,122 words) - 21:44, 14 October 2022
  • GMS:Display Options
    ...can be modified using the '''Display Options''' command in the ''Display'' menu. The '''Display Options '''command brings up the ''Display Options'' dialog ...brings up a dialog that can be used to edit the display attributes of the feature (color, font, line thickness, etc.). The following table describes the disp
    5 KB (822 words) - 22:33, 28 April 2022
  • SMS:1D Grid Tools
    ...o locate the objects. The GenCade menu also provides commands to edit the objects. ...d model currently included in the package (GenCade), does not support this feature. This tool would be used to create a point along the initial coastline.
    5 KB (754 words) - 15:23, 21 June 2017
  • GMS:IBOUND
    ...r method is to select the '''Cell Attributes''' command in the ''MODFLOW'' menu. In most cases, the most efficient method is to use the [[GMS:Activate Cell ...nu. The simplest method is to define the constant head zones using feature objects as part of a [[GMS:MODFLOW Conceptual Model Approach|conceptual model]] in
    2 KB (291 words) - 15:51, 13 October 2017
  • WMS:Edit Menu
    ...used to select objects, delete objects, and set basic object and material attributes. The ''Edit'' menu contains the following commands:
    8 KB (1,243 words) - 19:30, 1 May 2020
  • SMS:Observation Coverage
    # Select '''New Coverage''' from the right-click menu ...t Explorer]] and setting the type to ''Observation'' using the right-click menu.
    12 KB (1,910 words) - 22:14, 16 August 2021
  • WMS:Rational Method Basin Data
    ...once on the edit field for ''i'' and specify the value. [[WMS:Compute GIS Attributes|C (runoff coefficient)]] could be set in a similar fashion, while ''A'' (ar ...or ''DEM'' Drainage module menus, or in the ''Feature Objects'' Map module menu.
    3 KB (433 words) - 17:25, 17 October 2017
  • WMS:Display Options
    ...can be modified using the '''Display Options''' command in the ''Display'' menu. The '''Display Options''' command brings up the ''Display Options'' dialog ...kly]] by selecting the drop-down button, and other styles, fonts, sizes of attributes can be changed by selecting the button displaying the current setting (see
    4 KB (681 words) - 15:35, 28 September 2017
  • WMS:HSPF Automatic Segmentation of Land Segments
    Automated segment generation in WMS is driven by the ''Compute GS Attributes'' dialog. Prior to invoking this dialog: ...selecting the '''Compute GIS Attributes''' option from the ''Calculators'' menu in the Hydrologic Modeling module.
    3 KB (394 words) - 15:34, 12 October 2017
  • SMS:Grid Frame Properties
    ...n the grid and selecting the '''Properties''' command from the right-click menu. The ''Grid Frame Properties'' dialog allows specifying the attributes applied to the grid frame when performing a '''Map → 2D Grid''', '''Ma
    6 KB (976 words) - 21:11, 17 October 2019
  • SMS:Map Module Display Options
    ...ptions''' command. (It can also be accessed from the from the ''Display'' menu or the '''Display Options''' [[File:Display Options Macro.svg|16 px]] Macro The exact layout of the ''Display Options'' dialog for feature objects depends on the active coverage type. Some options are available on all cov
    8 KB (1,303 words) - 22:01, 26 March 2024
  • GMS:Building a FEMWATER Model
    ...]] (the direct approach), or the model can be defined with the aid of the feature object tools in the [[GMS:Map Module|Map module]] (the conceptual model ap ...Tool Palette|element faces]] and assigning values directly to the selected objects. The model is then saved and FEMWATER is launched.
    9 KB (1,467 words) - 21:15, 5 October 2017
  • WMS:Maricopa County Modeling
    ...around the watershed, and select the ''Mapping'' | '''Shapes→Feature Objects''' command. ...around the watershed, and select the ''Mapping'' | '''Shapes→Feature Objects''' command.
    5 KB (775 words) - 20:59, 22 July 2020
  • SMS:BOUSS Runup / Overtopping
    ==Simulation Menu== ...tion Icon.svg|16 px]] in the Project Explorer will bring up the simulation menu.
    10 KB (1,519 words) - 15:41, 16 July 2019
  • SMS:Mesh Generation
    ...mesh generation capability is based on [[SMS:Feature Objects Types|feature objects]]. ...ize their own meshing type. SMS supports the following principal mesh type attributes:
    4 KB (703 words) - 14:59, 24 September 2019
  • GMS:MODFLOW Conceptual Model Approach
    ...or by constructing a high level representation of the model using feature objects in the [[GMS:Map Module|Map module]] and allowing GMS to automatically assi ...id]], the package dialogs and interactive editing tools in the ''MODFLOW'' menu can be used to edit or review the data if desired.
    11 KB (1,752 words) - 16:54, 28 November 2017
  • WMS:HEC-HMS
    ...t parts of the HMS model. The Export HMS Basin File found in the ''HEC-1'' menu will create the input file necessary to use data derived in WMS to perform ...'Drainage Data → Feature Objects''' command found in the ''Drainage'' menu prior to exporting the HMS files.
    6 KB (961 words) - 19:05, 5 May 2020
  • SMS:WAM Graphical Interface
    ===WAM Grid Menu=== ...appear when the grid is active. The following option are under the ''WAM'' menu:
    10 KB (1,710 words) - 19:57, 30 September 2022
  • WMS:Display Menu
    ...enerate shaded images. The following commands are found in the ''Display'' Menu ...o be refreshed by selecting the '''Refresh''' command from the ''Display'' menu.
    6 KB (916 words) - 14:44, 1 May 2018
  • SMS:ADCIRC Spatial Attributes
    {{SMS Deprecated Feature}} == ADCIRC Nodal/Spatial Attributes ==
    12 KB (1,844 words) - 22:15, 27 April 2023
  • SMS:Converting Feature Objects
    ...ing commands from the [[SMS:Map Feature Objects Menu|''Feature Objects'']] menu: ...e that can currently be used) to extract the elevations at vertices of the feature arc cross-sections, or at the intersection points with the triangles.
    15 KB (2,526 words) - 18:21, 28 August 2020
  • WMS:DEM Basins
    Each time a feature outlet point is created, a basin for each upstream feature arc is created for the hydrologic modeling tree. This means that the stream ...not capture a feature such as a highway embankment, yet it is an important feature in basin delineation. It is possible to create a stream arc along the highw
    10 KB (1,729 words) - 20:51, 20 May 2020
  • WMS:GSSHA Feature Arcs
    ...be modified, depending on the type of feature arc. There are five types of feature arcs in GSSHA for standard GSSHA coverages: There are two feature arc types for GSSHA Storm Drain coverages:
    15 KB (2,242 words) - 21:51, 7 July 2020
  • SMS:SMS User Manual vol. 3
    :[[SMS:PTM Arc Attributes Dialog|PTM Arc Attributes Dialog]] :[[SMS:PTM Feature Point Attributes Dialog|PTM Feature Point Attributes Dialog]]
    13 KB (1,829 words) - 20:39, 9 January 2023
  • SMS:ADH Wind Stations
    {{SMS Deprecated Feature}} ...the specification of generic time series data at locations represented by feature points. ADH wind station data is specified in SMS as wind speed data (NOTE:
    5 KB (817 words) - 20:13, 11 September 2023
  • SMS:Generic Model Graphical Interface
    ** ''Set Active Material Group'' menu is hidden under the ''Gen2DM'' menu ==Generic 2D Mesh Arc Attributes Dialog==
    10 KB (1,602 words) - 14:49, 17 June 2020
  • WMS:Pipe and Node Parameters
    ...the ''Edit Pipes and Nodes'' column in the GSSHA feature arcs [[WMS:GSSHA Feature Arcs#Properties (GSSHA Storm Drain)|''Properties'' dialog]]. This is only a ...Each link may contain one or more pipes and two or more nodes. Many of the attributes between superjunctions and nodes between superjunctions overlap.
    7 KB (1,189 words) - 23:12, 17 May 2019
  • SMS:Quadtree Module
    ...le:Quadtree PolyAtt.png|thumb|250 px|Quadtree generator coverage ''Polygon Attributes'' dialog]] A generic coverage that can be used for creating feature objects to be converted to a quadtree. The [[SMS:Map Module Tools#Create Grid|'''Cr
    8 KB (1,182 words) - 16:59, 3 March 2022
  • SMS:Generic Model
    With the model attributes defined, generate a mesh or grid using the geometric tools in the map, mesh ...is in the mesh module menu, or for the coverage, if in the feature objects menu. The generic model definition, or template, is stored in a *.2dm file with
    5 KB (814 words) - 21:24, 2 May 2023
  • WMS:Graphical User Interface
    ==Menu Bar== {{main|WMS:Menu Bar}}
    8 KB (1,252 words) - 21:31, 14 February 2022
  • SMS:Feature Stamping
    ...ans adding an embankment (such as a levy) or dredging a channel. A stamped feature usually follows a linear object or centerline. <!--However, it can also be The basic steps to define a linear stamped feature include:
    19 KB (2,987 words) - 21:11, 19 November 2018
  • SMS:SMS User Manual 12.1
    :[[SMS:File Menu|File Menu]] :[[SMS:Edit Menu|Edit Menu]]
    26 KB (3,579 words) - 20:26, 9 January 2023
  • SMS:SMS User Manual 12.3
    :[[SMS:File Menu|File Menu]] :[[SMS:Edit Menu|Edit Menu]]
    26 KB (3,598 words) - 20:20, 9 January 2023
  • WMS:Compute GIS Attributes
    [[Image:WMS Compute GIS Attributes.png|thumb|400 px|''Compute GIS Attributes'' dialog]] ...supplied from a land use coverage in the map module or as DEM (a gridded) attributes.
    7 KB (1,199 words) - 22:31, 15 April 2024
  • SMS:TUFLOW Coverages
    ...verages]]. Coverages are used in SMS to represent geometry and associated attributes as points, arcs, and polygons. Unlike some models used in SMS, TUFLOW uses ...bjects]]) The boundary condition information is specified in the ''BC Node Attributes'' dialog (see [[SMS:TUFLOW_Boundary_Conditions#1D_Boundary_Conditions_at_No
    21 KB (3,419 words) - 16:59, 23 September 2019
  • SMS:SMS User Manual 13.0
    :[[SMS:File Menu|File Menu]] :[[SMS:Edit Menu|Edit Menu]]
    26 KB (3,568 words) - 19:29, 9 January 2023
  • SMS:SMS User Manual 12.2
    :[[SMS:File Menu|File Menu]] :[[SMS:Edit Menu|Edit Menu]]
    27 KB (3,630 words) - 20:30, 9 January 2023
  • SMS:SMS User Manual 13.1
    :[[SMS:File Menu|File Menu]] :[[SMS:Edit Menu|Edit Menu]]
    27 KB (3,677 words) - 19:26, 9 January 2023
  • SMS:SMS User Manual 13.2
    :[[SMS:File Menu|File Menu]] :[[SMS:Edit Menu|Edit Menu]]
    27 KB (3,714 words) - 17:11, 28 March 2023
  • SMS:SMS User Manual 13.3
    :[[SMS:File Menu|File Menu]] :[[SMS:Edit Menu|Edit Menu]]
    28 KB (3,788 words) - 20:24, 16 November 2023
  • WMS:Drainage Module Menus
    ==Drainage TIN Menu== The ''TIN'' menu for the Drainage module contains the following commands:
    14 KB (2,293 words) - 22:25, 5 May 2020
  • SMS:SMS User Manual 12.0
    :[[SMS:File Menu|File Menu]] :[[SMS:Edit Menu|Edit Menu]]
    29 KB (3,960 words) - 20:35, 9 January 2023
  • SMS:SMS User Manual 11.2
    :[[SMS:File Menu|File Menu]] :[[SMS:Edit Menu|Edit Menu]]
    29 KB (3,953 words) - 20:48, 9 January 2023
  • SMS:FESWMS
    {{SMS Deprecated Feature}} ...ts Menu#General Commands|'''Build Polygons''']] in the ''Feature Objects'' menu.
    8 KB (1,131 words) - 19:37, 22 February 2023
  • SMS:Images
    ...mported to SMS and displayed in the background to aid in the placement of objects as they are being constructed or simply to enhance a plot. Images can also ...[[Import_from_Web|Import from Web...]] commands in the [[SMS:Web_Menu|Web Menu]]. These commands greatly simplify the acquisition and use of image data.
    8 KB (1,244 words) - 19:58, 10 August 2023
  • WMS:WMS User Manual 10.1
    :[[WMS:Menu Bar|Menu Bar]] :[[WMS:File Menu|File Menu]]
    22 KB (2,974 words) - 23:02, 9 January 2023
  • WMS:Importing Shapefiles
    ...ct only the polygons to convert to a coverage and [[WMS:Mapping to Feature Objects|map]] them. In this way WMS will only be building topology for the selected *[[WMS:Feature Objects Menu#Cleaning|'''Clean''']] the feature objects in order to snap nodes within a certain distance, intersect arcs, and elimi
    14 KB (2,156 words) - 15:26, 29 August 2016
  • WMS:WMS User Manual 10.0
    :[[WMS:Menu Bar|Menu Bar]] :[[WMS:File Menu|File Menu]]
    23 KB (3,071 words) - 22:58, 9 January 2023
  • GMS:Coverages
    [[GMS:Feature Objects|Feature objects]] in the Map module are grouped into coverages. Coverages are grouped into ...er coverage could be used to define zones of hydraulic conductivity. These objects could not be included in a single coverage since polygons within a coverage
    16 KB (2,620 words) - 19:19, 10 November 2023
  • WMS:WMS User Manual 11.0
    :[[WMS:Menu Bar|Menu Bar]] :[[WMS:File Menu|File Menu]]
    22 KB (2,908 words) - 23:03, 9 January 2023
  • WMS:WMS User Manual 11.1
    :[[WMS:Menu Bar|Menu Bar]] :[[WMS:File Menu|File Menu]]
    22 KB (2,917 words) - 21:07, 6 February 2023
  • GMS:GMS User Manual
    ;3.1. The File Menu :[[GMS:File Menu|The File Menu]]
    17 KB (2,377 words) - 22:04, 9 January 2023
  • WMS:WMS User Manual 11.2
    :[[WMS:Menu Bar|Menu Bar]] :[[WMS:File Menu|File Menu]]
    22 KB (2,928 words) - 21:31, 21 November 2023
  • SMS:What's New in SMS 13.0
    * Select by features in the ''Edit'' menu: ** Find commands in individual menus to find objects (nodes, vertices, elements, cells, triangles, polygons) by ID or X,Y moved
    4 KB (618 words) - 22:46, 27 April 2020
  • WMS:WMS User Manual 9.1
    :[[WMS:Menu Bar|Menu Bar]] :[[WMS:File Menu|File Menu]]
    25 KB (3,355 words) - 22:56, 9 January 2023
  • SMS:SMS User Manual 11.1
    :[[SMS:Menu Bar|Menu Bar]] :[[SMS:Cartesian Grid Data Menu|Cartesian Grid Data Menu]]
    33 KB (4,655 words) - 20:51, 9 January 2023
  • GMS:GMS User Manual 8.3
    ;3.1. The File Menu :[[GMS:File Menu|The File Menu]]
    18 KB (2,517 words) - 22:16, 9 January 2023
  • GMS:GMS User Manual 10.0
    ;3.1. The File Menu :[[GMS:File Menu|File Menu]]
    18 KB (2,506 words) - 22:12, 9 January 2023
  • SMS:BOUSS-2D Graphical Interface
    == BOUSS-2D Menu == ...USS-2D]] simulation [[File:BOUSS2D Simulation Icon.svg|16 px]] right-click menu:
    14 KB (2,143 words) - 20:46, 19 July 2019
  • GMS:GMS User Manual 9.1
    ;3.1. The File Menu :[[GMS:File Menu|File Menu]]
    17 KB (2,406 words) - 22:15, 9 January 2023
  • GMS:Annotations
    ==Annotation Objects== These tools (annotation objects)<!-- are accessed through the Annotations [[File:Annotation Module Icon.svg
    24 KB (3,991 words) - 18:28, 5 May 2022
  • GMS:GMS User Manual 9.0
    ;3.1. The File Menu :[[GMS:File Menu|The File Menu]]
    17 KB (2,301 words) - 22:16, 9 January 2023
  • WMS:Hydrologic Modeling Wizard Overview
    ...the channel depth elevation entered in the [[WMS:GSSHA Feature Arcs|GSSHA Feature Arc Type dialog]]). ...After this tool is selected, select one or more stream arcs and edit the attributes or smooth the selected stream arcs.
    11 KB (1,687 words) - 18:07, 15 January 2024
  • WMS:WMS Non-native Files
    ...>or<br>*.dwg||CAD files may also be imported and then converted to feature objects, TINs, or simply used to enhance the display of a project. For more informa | DLG || *.dlg || <span id="DLG"></span>The ''DLG to Feature Arcs'' option allows a ''Digital Line Graph'' file to be imported and point
    6 KB (1,032 words) - 15:42, 24 February 2016
  • GMS:GMS User Manual 10.1
    ;3.1. The File Menu :[[GMS:File Menu|File Menu]]
    18 KB (2,489 words) - 22:10, 9 January 2023
  • GMS:GMS User Manual 9.2
    ;3.1. The File Menu :[[GMS:File Menu|File Menu]]
    18 KB (2,420 words) - 22:13, 9 January 2023
  • WMS:WMS 8.1 Dialog Help
    * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING * [[WMS:HEC-RAS|Bridge/Culvert Cross Section Attributes]] | 652 | IDD_BRIDGECULVERT
    22 KB (2,627 words) - 22:23, 27 January 2020
  • GMS:GMS User Manual 10.2
    ;3.1. The File Menu :[[GMS:File Menu|File Menu]]
    18 KB (2,536 words) - 22:10, 9 January 2023
  • SMS:Arcs
    SMS has many utilities that can be used to modify feature arcs. Most of these can be accessed by selecting and right-clicking on the ==Split Feature Arc==
    29 KB (5,004 words) - 19:19, 23 February 2024
  • GMS:GMS User Manual 10.3
    ;3.1. The File Menu :[[GMS:File Menu|File Menu]]
    19 KB (2,595 words) - 22:09, 9 January 2023
  • GMS:GMS User Manual 10.4
    ;3.1. The File Menu :[[GMS:File Menu|File Menu]]
    19 KB (2,660 words) - 22:07, 9 January 2023
  • WMS:File Extension
    ...then imported into WMS using the '''Import Grid''' command in the ''DEMs'' menu. |*.dlg||Digital Line Graph||The ''DLG to Feature Arcs'' option allows a Digital Line Graph file to be imported and points co
    5 KB (815 words) - 15:44, 29 November 2017
  • SMS:UGrid Display Options
    ...Options''' command. It can also be accessed from the from the ''Display'' menu or the '''Display Options''' [[File:Display Options Macro.svg|16 px]] macr | Feature angle || The UGrid boundary feature angle is used only when the ''UGrid Boundary'' option is selected. This ang
    11 KB (1,718 words) - 23:20, 8 November 2022
  • SMS:UGrid Module
    The UGrid module is used with unstructured grid (UGrid) geometric objects. Unstructured grids are very flexible. They can include many types of cells * [[SMS:Converting_Feature_Objects#Map_to_UGrid|Map feature objects]]
    17 KB (2,794 words) - 18:30, 23 November 2022
  • GMS:Creating and Editing UGrids
    ...anywhere in the Project Explorer or on the UGrid data item will display a menu with '''New UGrid 2D''' and '''New UGrid 3D''' commands. These commands bri ...s a UGrid from feature objects. It can be found in the ''Feature Objects'' menu, in the Map toolbar, and in some pop-up menus when right-clicking on items
    12 KB (1,970 words) - 21:40, 18 July 2022
  • SMS:What's New in SMS 11.1
    ...r more information, see [[SMS:GIS to Feature Objects Wizard|GIS to Feature Objects Wizard]]. ...ed on user specified criterion. For more information, see [[SMS:Arcs|Split Feature Arcs Utility]].
    13 KB (1,958 words) - 21:06, 9 January 2023
  • WMS:1D-HYD Cross Section Coverage Type
    ...), the ''Station'' (inherited from the centerline), and any specific model attributes. ...ible to import a cross section database using the ''File'' | '''[[WMS:File Menu#Open|Open...]]''', or by clicking the '''Import''' button in the [[#Managin
    27 KB (4,269 words) - 18:56, 4 January 2024
  • GMS:GMS User Manual 10.5
    ;3.1. The File Menu :[[GMS:File Menu|File Menu]]
    20 KB (2,836 words) - 22:07, 9 January 2023
  • SMS:What's New in SMS 12.0
    ...ur range from either the visible or selected nodes/vertices. The ''Data'' menu has two new commands: * GIS objects are opened in SMS using the Global Mapper library unless specific functiona
    11 KB (1,691 words) - 20:38, 9 January 2023
  • GMS:GMS User Manual 10.6
    ;3.1. The File Menu :[[GMS:File Menu|File Menu]]
    21 KB (3,002 words) - 22:03, 9 January 2023
  • WMS:WMS Dialog Help
    * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING * [[WMS:HEC-RAS_Bridges/Culverts|Bridge/Culvert Cross Section Attributes]] | 652 | IDD_BRIDGECULVERT
    24 KB (2,949 words) - 22:22, 27 January 2020
  • GMS:GMS User Manual 10.7
    ;3.1. The File Menu :[[GMS:File Menu|File Menu]]
    22 KB (3,017 words) - 19:30, 29 March 2023
  • GMS:GMS User Manual 10.8
    ;3.1. The File Menu :[[GMS:File Menu|File Menu]]
    22 KB (3,073 words) - 19:37, 3 May 2024
  • GMS:Plot Wizard
    ...l for many purposes, such as extracting data from two or three dimensional objects and model verification. Plots are created through the ''Plot Wizard''. ...cond step of the ''Plot Wizard'', the attributes of each plot are set. The attributes associated with each plot type are explained below and can be located quick
    38 KB (6,273 words) - 20:01, 11 May 2023
  • WMS:WMS 11.0 Dialog Help
    * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING * [[WMS:HEC-RAS_Bridges/Culverts|Bridge/Culvert Cross Section Attributes]] | 652 | IDD_BRIDGECULVERT
    25 KB (3,064 words) - 22:24, 27 January 2020
  • WMS:WMS 11.1 Dialog Help
    * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING * [[WMS:HEC-RAS_Bridges/Culverts|Bridge/Culvert Cross Section Attributes]] | 652 | IDD_BRIDGECULVERT
    25 KB (3,075 words) - 19:58, 1 September 2022
  • WMS:WMS 11.2 Dialog Help
    * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING * [[WMS:HEC-RAS_Bridges/Culverts|Bridge/Culvert Cross Section Attributes]] | 652 | IDD_BRIDGECULVERT
    25 KB (3,079 words) - 18:13, 16 May 2023
  • WMS:WMS 99.99 Dialog Help
    * [[WMS:Mapping to Feature Objects|Arc GIS Mapping]] | 140 | IDD_ARCGISMAPPING * [[WMS:HEC-RAS_Bridges/Culverts|Bridge/Culvert Cross Section Attributes]] | 652 | IDD_BRIDGECULVERT
    26 KB (3,205 words) - 18:12, 16 May 2023
  • SMS:1D River Module
    {{SMS Deprecated Feature}} [[Category:Archived]] ...g the data is done using the cross section editor from the ''River Tools'' menu in the Map module.
    8 KB (1,328 words) - 21:48, 24 March 2022
  • SMS:What's New in SMS 11.2
    ...everal years. This methodology allows a model developer to define all the attributes of an interface for a specific model in an XML file. SMS will read this fi ** Model specific menu commands.
    11 KB (1,683 words) - 20:55, 9 January 2023
  • SMS:What's New in SMS 10.1
    * [[SMS:SMS Menus#Web Menu|Web Menu]] - New menu for accessing importing data from the web. ...eature Objects#Map to 2D Grid|Cartesian Grid mapping]] &ndash; Map to grid attributes are now stored with the grid frames so it is easy to go back and create new
    10 KB (1,600 words) - 21:21, 9 January 2023
  • SMS:What's New in SMS 13.1
    *New [[SMS:Extract Features Tool|Feature Extraction]] functionality *New universal [[SMS:Map Module Tools|'''Select Objects''']] tool.
    7 KB (1,034 words) - 21:08, 13 October 2022
  • XMS:What's New in SMS 11.1
    ...data (shape file or mif/mid) and convert this to generic model node or arc attributes. ...point attributes (Generic 2D mesh coverage) to mesh nodestring and node attributes. Click here to learn more.
    9 KB (1,399 words) - 15:35, 24 September 2018
  • GMS:Preferences
    ...t of selected objects is about to be deleted. This is meant to ensure that objects are not deleted accidentally. ...nging module'' &ndash; Ensures the visibility of the Project Explorer item objects in a module when the module is changed.
    20 KB (3,142 words) - 18:50, 5 May 2022
  • SMS:Release Notes SMS 10.0
    # Fixed a crash in converting GIS shapefiles to feature objects # Fixed a crash with converting Shapefiles (GIS) to Feature objects (Map module)
    14 KB (2,218 words) - 23:45, 9 January 2023
  • SMS:CGWAVE Graphical Interface
    ...oastline (or extreme locations on the coastline) and issuing the ''Feature Objects | Define domain...'' command in the [[SMS:Map_Module|map module]]. </li> <li> Build polygons in the [[SMS:Map_Module|map module]] and assign polygon attributes for the polygon to use the depth and size functions for bathymetry and size
    8 KB (1,328 words) - 15:03, 23 March 2022
  • GMS:Global Options/Basic Package
    ...og is accessed through the '''Global Options''' command in the ''MODFLOW'' menu. ...W|''Custom Run MODFLOW'']] dialog when the ''MODFLOW'' | '''Run MODFLOW''' menu command is selected.
    11 KB (1,736 words) - 18:07, 11 January 2024
  • GMS:File Import Wizard Supported File Formats
    This creates new [[GMS:Feature_Objects#Points|feature points]] in the existing, active [[GMS:Feature_Objects#Coverages|coverage]] This creates new [[GMS:Feature_Objects#Points|feature points]] in an existing [[GMS:Feature_Objects#Coverages|coverage]]. The poi
    24 KB (3,306 words) - 14:08, 14 May 2019
  • SMS:SRH-2D Coverages 13.0
    {{SMS Deprecated Feature}} ...Project_Explorer#Coverage Item Right-Click Menus|coverage item right-click menu commands]] as well as two specific commands&mdash;the '''HY-8 Options''' an
    18 KB (2,795 words) - 17:25, 5 April 2021
  • SMS:Release Notes SMS 12.0
    **8270 - Tidal Data commands for the Web menu do nothing *8194 GenCade coverages lose attributes when merged
    10 KB (1,383 words) - 23:46, 9 January 2023
  • SMS:SMS 11.2 Dialog Help
    # [[SMS:Mesh Data Menu#Mesh to Map|Mesh to Map]] | 127 | IDD_MESH_TO_MAP # [[SMS:Plot Window#Plot Window Right-Click Menu|Plot Window Right-Click Menu]] | 149 | IDD_AXISTITLES
    56 KB (7,016 words) - 18:35, 5 May 2022
  • SMS:SMS 12.0 Dialog Help
    # [[SMS:Mesh Data Menu#Mesh to Map|Mesh to Map]] | 127 | IDD_MESH_TO_MAP # [[SMS:Plot Window#Plot Window Right-Click Menu|Plot Window Right-Click Menu]] | 149 | IDD_AXISTITLES
    57 KB (7,049 words) - 18:36, 5 May 2022
  • GMS:GMS 9.1 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    19 KB (2,468 words) - 18:55, 5 May 2022
  • GMS:GMS 9.2 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    19 KB (2,512 words) - 18:55, 5 May 2022
  • SMS:SMS 12.1 Dialog Help
    # [[SMS:2D Mesh Nodes Menu#Find Node|Find 2D Mesh Node Dialog]] | 102 | IDD_FINDNODE # [[SMS:Mesh Data Menu#Mesh to Map|Mesh to Map]] | 127 | IDD_MESH_TO_MAP
    55 KB (6,908 words) - 18:40, 5 May 2022
  • SMS:SMS 12.3 Dialog Help
    # [[SMS:2D Mesh Nodes Menu#Find Node|Find 2D Mesh Node Dialog]] | 102 | IDD_FINDNODE # [[SMS:Mesh Data Menu#Mesh to Map|Mesh to Map]] | 127 | IDD_MESH_TO_MAP
    56 KB (6,992 words) - 18:45, 5 May 2022
  • SMS:SMS 12.2 Dialog Help
    # [[SMS:2D Mesh Nodes Menu#Find Node|Find 2D Mesh Node Dialog]] | 102 | IDD_FINDNODE # [[SMS:Mesh Data Menu#Mesh to Map|Mesh to Map]] | 127 | IDD_MESH_TO_MAP
    56 KB (6,974 words) - 18:44, 5 May 2022
  • SMS:SMS 13.0 Dialog Help
    # [[SMS:2D Mesh Nodes Menu#Find Node|Find 2D Mesh Node Dialog]] | 102 | IDD_FINDNODE # [[SMS:Mesh Data Menu#Mesh to Map|Mesh to Map]] | 127 | IDD_MESH_TO_MAP
    57 KB (7,053 words) - 18:45, 5 May 2022
  • SMS:SMS 13.1 Dialog Help
    # [[SMS:2D Mesh Nodes Menu#Find Node|Find 2D Mesh Node Dialog]] | 102 | IDD_FINDNODE # [[SMS:Mesh Data Menu#Mesh to Map|Mesh to Map]] | 127 | IDD_MESH_TO_MAP
    57 KB (7,152 words) - 18:46, 5 May 2022
  • SMS:SMS 13.2 Dialog Help
    # [[SMS:2D Mesh Nodes Menu#Find Node|Find 2D Mesh Node Dialog]] | 102 | IDD_FINDNODE # [[SMS:Mesh Data Menu#Mesh to Map|Mesh to Map]] | 127 | IDD_MESH_TO_MAP
    58 KB (7,218 words) - 17:35, 28 November 2022
  • SMS:SMS 13.3 Dialog Help
    # [[SMS:2D Mesh Nodes Menu#Find Node|Find 2D Mesh Node Dialog]] | 102 | IDD_FINDNODE # [[SMS:Mesh Data Menu#Mesh to Map|Mesh to Map]] | 127 | IDD_MESH_TO_MAP
    58 KB (7,253 words) - 20:33, 8 March 2024
  • SMS:SMS 99.99 Dialog Help
    # [[SMS:2D Mesh Nodes Menu#Find Node|Find 2D Mesh Node Dialog]] | 102 | IDD_FINDNODE # [[SMS:Mesh Data Menu#Mesh to Map|Mesh to Map]] | 127 | IDD_MESH_TO_MAP
    58 KB (7,253 words) - 20:36, 8 March 2024
  • GMS:GMS 10.0 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    21 KB (2,781 words) - 19:02, 5 May 2022
  • GMS:GMS 10.1 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    22 KB (2,850 words) - 18:55, 5 May 2022
  • GMS:GMS 10.2 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    22 KB (2,917 words) - 18:56, 5 May 2022
  • SMS:Release Notes SMS 11.2
    **8317 - Crash in Nodestring right-click menu *08270 - Tidal Data commands for the Web menu do nothing
    20 KB (2,895 words) - 23:45, 9 January 2023
  • GMS:GMS 10.3 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    23 KB (3,074 words) - 18:59, 5 May 2022
  • Blog Post Directory
    | rasters, contour lines, feature objects | assign attributes, map to modflow
    58 KB (6,637 words) - 20:07, 7 May 2024
  • GMS:GMS 10.4 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    24 KB (3,114 words) - 18:59, 5 May 2022
  • GMS:GMS 8.0 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    32 KB (4,350 words) - 15:14, 16 March 2018
  • SMS:Dynamic Model Interface Schema
    | info = Used to specify what attributes should be used for the arcs of a coverage. | attributes = none
    163 KB (21,788 words) - 16:04, 4 March 2019
  • GMS:GMS 11.0 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    24 KB (3,125 words) - 20:02, 1 September 2022
  • GMS:GMS 8.3 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    33 KB (4,361 words) - 18:52, 5 May 2022
  • GMS:GMS 9.0 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    32 KB (4,314 words) - 18:52, 5 May 2022
  • GMS:GMS 8.1 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    33 KB (4,471 words) - 15:13, 16 March 2018
  • GMS:GMS 6.5 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS Module#GIS to Feature Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    33 KB (4,438 words) - 15:14, 16 March 2018
  • GMS:GMS 10.5 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    26 KB (3,476 words) - 19:01, 5 May 2022
  • GMS:GMS 7.0 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS Module#GIS to Feature Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    33 KB (4,484 words) - 15:14, 16 March 2018
  • WMS:MWBM Wizard
    ...the Main Graphics Window to manually adjust the ''Feature Point X'' and ''Feature Point Y'' locations. *Clicking '''Units...''' brings up the [[WMS:Edit Menu#Units|'''Units''' dialog]]. The dialog allows model and parameter units to
    23 KB (3,644 words) - 20:28, 22 March 2019
  • GMS:GMS 10.6 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    29 KB (3,958 words) - 21:11, 12 October 2022
  • GMS:GMS 10.7 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    29 KB (4,005 words) - 15:05, 30 March 2023
  • GMS:GMS 99.99 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    31 KB (4,278 words) - 20:34, 8 March 2024
  • GMS:GMS 10.8 Dialog Help
    # [[GMS:Feature Objects#Points|Point Display Attributes]] | 46 | IDD_POINT_DISPLAY_ATTS # [[GMS:GIS_to_Feature_Objects|GIS to Feature Objects]] | 140 | IDD_ARCGISMAPPING
    32 KB (4,300 words) - 20:29, 8 March 2024
  • SMS:Version History
    ##* Option to export map coverage attributes #*New [[SMS:Extract Features Tool|Feature Extraction]] functionality
    79 KB (12,273 words) - 21:15, 3 October 2023
  • SMS:Release Notes SMS 11.0
    #Fixed a crash that sometimes happened when converting GIS data to feature objects. #Dragging of feature nodes now displays connecting lines while dragging.
    24 KB (3,926 words) - 23:46, 9 January 2023
  • GMS:Release Notes GMS
    ...can determine your maintenance expiration date by selecting the [[GMS:Help Menu|''Help'' | '''Register''']] command from GMS. You can renew your maintenanc *15094 Modflow menu options selectable without a simulation
    68 KB (9,854 words) - 16:58, 15 May 2024
  • SMS:Release Notes SMS
    *15119 SMS crashes when trying to preview mesh in mesh generator polygon attributes dialog *14934 GUI Test: Error when trying to insert EWN feature arc into mesh
    134 KB (19,043 words) - 16:49, 15 May 2024
  • WMS:Release Notes WMS
    ...n determine your maintenance expiration date by selecting the ''[[WMS:Help Menu|Help | Register]]'' command from WMS. You can renew your maintenance by vis *14995 WMS Crash with computing GIS attributes
    160 KB (20,922 words) - 16:37, 15 May 2024
  • GMS:Older Release Notes GMS
    {{GMS Deprecated Feature}} *6651 10-18-2013 12-17-2013 Export to CAD feature does not export faces
    69 KB (10,607 words) - 23:45, 9 January 2023
Retrieved from "https://www.xmswiki.com/wiki/Special:Search"