Search results

From XMS Wiki
Jump to navigationJump to search

Page title matches

Page text matches

  • WMS:Read Data
    ...aCatalog.jpg|thumb|none|left|550 px|HY8 Modeling Wizard showing the ''Read Data (Catalog)'' step.]] The ''Read Data (Catalog)'' from catalog step is used to select and read data from a WMS catalog.
    581 bytes (84 words) - 15:13, 20 October 2017
  • WMS:Read Data Overview
    #REDIRECT [[WMS:Read Data]]
    27 bytes (4 words) - 20:35, 25 September 2013
  • WMS:Read Data Help
    #REDIRECT [[WMS:Read Data]]
    27 bytes (4 words) - 20:35, 25 September 2013
  • WMS:Read Data Step
    #REDIRECT [[WMS:Read Data]]
    27 bytes (4 words) - 20:35, 25 September 2013
  • WMS:Read Data Catalog
    #REDIRECT [[WMS:Read Data]]
    27 bytes (4 words) - 20:48, 25 September 2013
  • WMS:HY8 Modeling Wizard Read Data
    #REDIRECT [[WMS:Read Data]]
    27 bytes (4 words) - 20:48, 25 September 2013
  • SMS:Generic Vector/Raster Files
    ...files and many kinds of raster files that are automatically identified and read into SMS. *ESRI Shapefiles – read into GIS module
    1 KB (218 words) - 21:39, 5 September 2018
  • SMS:CHS Web Data Files
    ...th time series curves stored on the point. CHS HURDAT files are not to be read into SMS, because SMS already supports the reading of HURDAT files in their
    670 bytes (104 words) - 16:17, 5 August 2016
  • WMS:MWBM User Manual
    ;1. Read Existing Model :[[WMS:MWBM Wizard#Read Existing Model|Read Existing Model]]
    1 KB (171 words) - 19:12, 22 March 2019
  • WMS:HY8 Modeling Wizard
    ...selecting the HY-8 modeling wizard tool in the [[WMS:Get Data Toolbar|Get Data Toolbar]] ([[Image:GetDataToolbar1.png]]). # [[WMS:Watershed Data|Watershed Data]]
    2 KB (316 words) - 16:38, 27 February 2018
  • SMS:Q&A HEC-RAS
    '''Q:''' Can you load *.sdf files created in HEC-RAS into SMS to view the data results? ...ear is the river schematic. No data information will appear. To view the data information, use the HEC-RAS interface to create plots and displays.
    1 KB (212 words) - 14:12, 11 June 2019
  • SMS:File Formats
    ...e SMS Files|Native SMS Files]]''' – Non-model specific files SMS can read and write ...S_Files|Non-native SMS Files]]''' – Non-model specific files SMS can read, but must convert and save to a different format
    1 KB (190 words) - 20:43, 31 July 2019
  • GMS:Saving and Reading a MODFLOW Simulation
    After building a MODFLOW simulation, the simulation results can be saved and read into GMS. ...ed to a set of input files. The MODFLOW super file is used to store extra data used by GMS but not used by MODFLOW. The super file also contains the path
    3 KB (443 words) - 15:18, 25 August 2017
  • WMS:Preparing Stage Data
    There are three basic ways to create stage data for floodplain delineation. The [[WMS:WMS Tutorials|tutorial]] on floodplai ==Hydraulic Model Data==
    3 KB (398 words) - 21:52, 4 May 2020
  • SMS:LandXML Files
    ...ormat. This makes LandXML a good choice for getting bathymetry/topographic data into SMS as the connectivity will be maintained. ===Locating Data in a LandXML file===
    2 KB (278 words) - 16:53, 4 February 2019
  • WMS:Watershed Data
    ...ata.jpg|thumb|none|left|550 px|HY8 Modeling Wizard showing the ''Watershed Data'' step.]] ...ershed Data'' step is used for defining how to read data into WMS. Obtain data using the WMS web service client, a catalog file, or by simply opening file
    937 bytes (142 words) - 15:08, 20 October 2017
  • WMS:GSSHA Model Linkage
    ...a from parent model'' – Select to output the computed watershed mask data from the parent model. ...h; Turn on to have WMS update the child model with computed watershed mask data from the current project.
    3 KB (561 words) - 21:29, 15 May 2019
  • SMS:Digital Elevation Maps
    ...d, displayed and utilized more efficiently than scattered datasets. These data sources are becoming more prevalent and can be obtained for topographic re ...ymetric portions of the domain, which makes their use in SMS limited. New data bases are being developed, but due to the dynamic nature of bathymetric in
    777 bytes (121 words) - 14:43, 31 October 2012
  • SMS:TUFLOW Grid Options
    ...fied using coverages and this has several advantages including size of the data, speed of execution, and more opportunities for reuse. ...als''' button – Brings up the general [[SMS:Material Data|''Material Data'']] dialog.
    3 KB (405 words) - 22:17, 25 June 2020
  • GMS:SEEP2D Files
    | Data || .s2d || ASCII || Main input file read by SEEP2D ...lso contains other data needed by GMS but not contained in the main SEEP2D data file.
    2 KB (391 words) - 19:18, 22 August 2016
  • WMS:CE-QUAL-W2 Menu
    ...enu. If '''New Simulation''' is selected during a model it will clear all data and begin a new model. This option of the ''CE-QUAL-W2'' menu clears all data for the current simulation.
    4 KB (709 words) - 21:01, 13 December 2023
  • SMS:Export Dataset Dialog
    ** Binary Dataset Files (*.dat) – Benefits include fast read/write times, small file size. ** XMDF Dataset Files (*.h5) – Benefits include fast read/write times, small file size, native compression.
    1 KB (209 words) - 21:44, 9 June 2022
  • WMS:Deleting Data
    ...en deleting the TIN, it will no longer appear in WMS but the file that was read in is not deleted from the hard disk. The methods that can be used to delete data from WMS include:
    1 KB (249 words) - 22:12, 6 January 2020
  • WMS:HEC-HMS Post-Processing
    ...Then start HMS, read the HMS file, and run the simulation in HMS. Finally, read the solution back into WMS by opening the HMS DSS solution file from WMS. To read the solution into WMS, open the DSS file associated with the name of the ba
    2 KB (308 words) - 18:20, 25 March 2020
  • SMS:File Import Filter Options
    ...e scatter set has been read into SMS, the more sophisticated [[SMS:Scatter Data Menu#Scatter Commands|normals filtering algorithm]] can be used. ...ds points falling within the specified x, y boundary. Useful for filtering data outside of the area of interest.
    2 KB (279 words) - 19:25, 6 June 2023
  • GMS:Importing/Exporting CAD Data
    ...ata being imported. Currently, GMS cannot merge the incoming data with the data in memory. ...emory when a GMS project is saved, GMS creates a new DWG file from the CAD data. The file is put in the same folder with the other project files and named
    2 KB (321 words) - 21:40, 2 April 2021
  • WMS:WMS User Manual vol. 4
    |subtitle=Data and Appendices ===Importing/Exporting Data===
    2 KB (227 words) - 22:58, 9 January 2023
  • WMS:MODRAT (Q&A)
    ...ion (tc) data built in to WMS or would a user have to read in their own tc data from a file? ...'' Time concentration data is built in to WMS, but a user could develop tc data outside of WMS and enter it directly into the interface. There are essenti
    1,005 bytes (178 words) - 16:12, 11 December 2017
  • SMS:Map Files
    When SMS saves a project, all the data related to coverages in the Map module is written to a single ASCII file na ...ll contain all coverages, coverage type, and feature objects under the Map Data folder in the project. When the project is opened, these coverages and feat
    1 KB (235 words) - 22:00, 2 September 2021
  • SMS:Spectral Coverage
    Spectral coverages are used to store all spectral data by location and time. These coverages are then used as spectral input for C ...rom various locations defined in a nesting file. Within SMS, this spectral data is defined using a spectral coverage. Each point in this coverage can be as
    1 KB (210 words) - 21:35, 6 September 2022
  • SMS:Importing Files
    ...the ''File Import Wizard'' is used to specify how SMS should read the file data into the project. See [[SMS:File Import Wizard|File Import Wizard]] for mor *[[SMS:GIS_Module_Menus#GIS_Data_Menu_Commands|'''Add Data''']]
    3 KB (496 words) - 14:59, 26 June 2018
  • SMS:CMS
    ...in the coastal zone. The CMS has been verified with field and laboratory data. ...to the native domain (interpolate wave data onto the flow grid and/or flow data onto the wave grid).
    3 KB (441 words) - 19:12, 27 April 2023
  • WMS:Project Explorer Contents for GIS Module
    ...dule. This module can be used for displaying and converting GIS data, but data in this module is not meant to be used for watershed analysis directly. ...MS can read either raster or vector GIS data into the GIS module and these data can be converted to various formats for use both inside and outside of WMS.
    10 KB (1,537 words) - 20:36, 23 January 2019
  • WMS:HEC-RAS Unsteady Modeling
    ...in this hydrograph from one of the hydrologic models in WMS, from measured data, or from any other method. Enter this hydrograph as a boundary condition in ...S project (*.prj) file. All the time steps from the unsteady model will be read into WMS. To view the results of the unsteady simulation, it's necessary to
    2 KB (359 words) - 17:01, 11 October 2017
  • WMS:Using GIS Data to Map Parameters
    ...rcent Impervious Land Use|percent impervious]], and DPA zones from digital data layers. The procedure requires a digital map of the parameter, such as rain ...ACDPW) is assigned to LA County Soil type field of WMS. Once the soil type data is present in WMS, compute and assign soil numbers using the '''[[WMS:Impor
    5 KB (871 words) - 19:52, 4 January 2024
  • WMS:What's new in WMS version 10.1
    # Maximum number of terrain data layers (DEMs and TINs): 1 ..., 2D scattered data, CAD data, 2D grid data, and 1D open-channel hydraulic data (HECRAS) are not allowed in the community edition. Purchase licenses that
    4 KB (597 words) - 23:14, 9 January 2023
  • WMS:Creating Watershed Models
    ...given watershed may already exist. In order to take advantage of this type data when available, WMS allows hydrologic models to be built directly from thre ...f the given hydrologic model. It also means that a tiff image map or other data can be used to establish the boundaries of the watershed at the proper scal
    1 KB (223 words) - 16:14, 24 February 2016
  • WMS:XPSWMM
    # Delineate watersheds in a drainage coverage and compute the basin data. ...ing module, make xpswmm the active model; define/compute xpswmm hydrologic data as desired (in a spreadsheet-based dialog).
    3 KB (421 words) - 17:59, 17 October 2017
  • WMS:TR-55
    ...to the methodology, uses, and limitations. For more in depth information, read ''[http://www.nrcs.usda.gov/Internet/FSE_DOCUMENTS/stelprdb1044171.pdf Tech * '''Read Simulation''' – Brings to the ''Open'' dialog to import a file saved
    3 KB (391 words) - 16:08, 14 December 2017
  • WMS:Read Stage File
    Data can also be formatted in a [[2D Scatter Point Files|scatter point file]], o .... Version 7.0 of WMS will then read this stage file and create scattered data points for each of the locations in the old format stage file.
    2 KB (293 words) - 16:06, 8 December 2016
  • WMS:WMS Project Files
    ...the project file are opened and read in. This makes it possible to quickly read in several files without having to identify each file individually in the f |DATA FILE.SCL||/* Data set file */
    2 KB (391 words) - 15:19, 16 September 2014
  • WMS:Interpolating Hydraulic Model Results
    * [[WMS:HEC-RAS#HEC-RAS Read Solution|Read HEC-RAS Simulation]] * [[WMS:Preparing Stage Data|Preparing Stage Data]]
    2 KB (283 words) - 20:49, 28 November 2022
  • GMS:UTEXAS Commands
    ...becomes available. This menu can also be found by right-clicking on UTEXAS data in the project explorer. The menu has the following commands: ; Read Solution... : Allows opening a UTEXAS solution file.
    1 KB (150 words) - 15:12, 7 June 2019
  • GMS:FEMWATER Post-Processing Viewing Options
    ...d GMS dataset file format and can be imported directly to GMS using the '''Read Solution''' command in the ''FEMWATER'' menu. One of the output options for FEMWATER is a flux file containing flow budget data for boundary nodes. Once this file is imported, FEMWATER fluxes for selecte
    2 KB (316 words) - 22:37, 11 July 2016
  • WMS:Maricopa County Modeling
    # Read the DEM into WMS (download DEMs from [http://seamless.usgs.gov/ the USGS Se # Read into WMS any image data to be used.
    5 KB (775 words) - 20:59, 22 July 2020
  • WMS:Soil Type
    ...es whether a soil type coverage or a soil type grid will be used. The soil data has a slightly different meaning depending on whether CN or runoff coeffici ...reading from a database file that is associated with a shapefile WMS will read the letter values and assign the appropriate integer ID. The standard soil
    2 KB (256 words) - 21:58, 18 December 2019
  • GMS:Importing/Exporting GIS Grids
    ...instance of the grid file to create a grid with a single dataset, and then read in the other grids as extra datasets on the first grid. This can be accompl [[Category:Importing Data|GIS]]
    2 KB (346 words) - 15:32, 29 November 2017
  • SMS:SMS Super Files *.sup
    ...ommand. These contain a 2D scatter point file and the corresponding ASCII data file. ...the super file are opened and imported. This makes it possible to quickly read in several files without having to identify each file individually in the
    2 KB (319 words) - 16:22, 26 September 2017
  • SMS:Cartesian Grid Coordinates
    ...in the original projection. This method will reduce rounding errors in the data introduced when converting coordinates. If a grid is read in from a file that does not specify a projection, the grid will "float" in
    2 KB (242 words) - 16:37, 28 January 2016
  • SMS:TUFLOW Check Files
    ...simulation that is running and the filename ending identifies the type of data contained in the file. ...warnings or checks (listed in descending order of severity). These can be read into the GIS module of SMS. This provides quick feedback of model errors an
    2 KB (388 words) - 15:52, 29 November 2016
  • GMS:MODFLOW with HDF5
    ...to be able to read input data stored in HDF5 files. GMS saves some MODFLOW data to an HDF5 file that is saved with the other MODFLOW files. Some MODFLOW fi ...the disk reads and writes are much faster than with ASCII files. View the data stored in an HDF5 file by using [http://hdf.ncsa.uiuc.edu/hdf-java-html/hdf
    9 KB (1,502 words) - 21:28, 7 August 2020
  • WMS:What's new in WMS version 9.1
    ==== Add GIS Data Command ==== ...ser to read many formats of vector and raster GIS data. After reading the data, it can be viewed or converted to a format that can be used for hydrologic
    9 KB (1,412 words) - 23:36, 9 January 2023
  • WMS:GSSHA
    ...''' [[File:2D Grid Icon.svg|14px]]. The model check runs through the input data for a GSSHA simulation and looks for obvious inconsistencies and problems w **''Suppress screen printing'' – Suppresses the output of runtime data from GSSHA at each time step, significantly reducing the overall run time r
    6 KB (999 words) - 23:05, 13 May 2021
  • WMS:May2009Webinar
    ...pre-delineated watershed as an ArcGIS file, such as a shapefile, as vector data, and then map it to a DEM to include the elevations in your watershed. '''Does the model have the capability to work with NRCS Soil Data Mart data?'''
    5 KB (793 words) - 19:29, 23 March 2020
  • SMS:TUFLOW 2D Geometry Components
    ...e objects of the same type in a geometry component. When this happens, the data is applied in the order of the objects in the component. This means that th ...right-click menu. The TUFLOW options that can be set for how the scatter data modifies Z values are "All", "Add", "Min" and "Max".
    5 KB (780 words) - 16:01, 9 October 2017
  • WMS:Importing USGS DEMs
    ...The '''Add''' button is used to add a new file to the list of files to be read. It is possible to select multiple DEM files at the same time rather than a ...phics window. Only elevation points inside this rectangular region will be read in when hitting '''OK''' from this dialog. This boundary rectangle can be m
    5 KB (794 words) - 22:32, 16 December 2019
  • GMS:Importing an MT3DMS Simulation
    ...le's extension to *.mfn. GMS can then pull in this *.mfn file using the '''Read Solution''' command in the ''MODFLOW'' menu which will pull in the concentr [[Category:Importing Data|MT3D]]
    2 KB (315 words) - 16:25, 15 November 2017
  • SMS:CAD Data
    ...DWG/DXF). CAD data in SMS can be converted and use in other modules. SMS data can be converted into CAD layers and saved in a supported format. ...ata being imported. Currently, SMS cannot merge the incoming data with the data in memory.
    4 KB (687 words) - 21:40, 2 April 2021
  • WMS:Hydrographs
    ...lows hydrographs to be displayed and compared. Multiple hydrographs can be read in and viewed, listed, and exported. Plot options allow control over the wa Hydrographs can be read into WMS from a results files using the '''Open''' command in the ''Hydrogr
    8 KB (1,359 words) - 16:00, 31 January 2017
  • WMS:Overview of Floodplain Delineation
    ...file as a scatter dataset (see [[WMS:Preparing Stage Data|preparing stage data]] for more help). A smooth water surface is constructed by interpolating wa ...ng Stage Data|Prepare the water surface elevation data]]. Water elevations data consists of a series of surface water elevations points defined as x, y, z
    6 KB (942 words) - 15:57, 14 December 2017
  • SMS:WAM Spectra from STWAVE Grids
    ...mestep would take an unreasonable amount of disk space, WAM writes spectra data at user specified cells. These cells are referred to as spectra sites and c ...tra files may be read back into SMS by selecting the grid, and choosing '''Read Spectral Files''' from the ''WAM'' menu. The spectra files should be within
    3 KB (570 words) - 21:38, 10 June 2016
  • GMS:Q&A MT3D
    ...3DMS is generated by GMS and saved to a set of files. These files are then read by MT3DMS when MT3DMS is executed from the GMS menu. The output super file
    654 bytes (126 words) - 16:19, 11 December 2017
  • WMS:HSPF Mass Links
    ...mulations, it would be wise to save the mass links to a file that would be read in any time they are needed. The '''Export''' button allows specifying a fi * [[WMS:HSPF Edit Parameters#Basin Data|Basin Data]]
    2 KB (295 words) - 21:02, 13 December 2023
  • WMS:What's new in WMS version 9.0
    ...h of the data can be computed automatically using the interface, and other data values can be entered in the easy-to-use windows. The other storm drain mo ...download and use georeferenced images for any part of the world with your data.]]
    6 KB (981 words) - 23:35, 9 January 2023
  • SMS:Native SMS Files
    Native SMS Files are files SMS can read and write. SMS interface files contain data used by SMS to save display options, user preferences, etc.
    4 KB (683 words) - 22:18, 27 June 2018
  • GMS:What's New in GMS 7.0
    ...files that MODFLOW can read. A modified version of MODFLOW 2000 is used to read the simulation files and translate them into GMS format. Simulations prepar ##:If MODFLOW is compiled in double precision mode, GMS can read the double precision output files that MODFLOW generates.
    5 KB (825 words) - 14:25, 12 September 2016
  • SMS:Reading a TUFLOW Simulation
    ...mulations can be opened together, and SMS will only create one copy of the data that is shared between the projects. *BC CONTROL FILE – Read the specified TUFLOW boundary condition file
    12 KB (2,013 words) - 14:53, 25 September 2017
  • WMS:GSSHA Menu
    ; Read Stream Elevation... ...en the [[WMS:Display Options|''Display Options'' dialog]], select "2D Grid Data" from the list on the left, and turn on the three ''Lake Cells'' options on
    6 KB (964 words) - 17:57, 21 May 2021
  • SMS:File Import Wizard
    ...ng a *.txt file, *.csv file, *.xyz file, or other file type containing raw data. The ''File Import Wizard'' will automatically appear when opening a file t ...delimits the data into columns. The following options exist to delimit the data:
    5 KB (871 words) - 19:43, 6 June 2023
  • WMS:HEC-HMS
    ...and the model can be run in HMS. The results from these models can then be read into and viewed in WMS. ...ting and exporting DSS files, allowing for reading and writing time series data from and to HMS.
    6 KB (961 words) - 19:05, 5 May 2020
  • GMS:Importing USGS DEMs
    ...them one at a time, but they must all be of the same format) that will be read. The standard file opening dialog appears from which DEM files can be sele ...phics window. Only elevation points inside this rectangular region will be read in when hitting '''OK''' from this dialog. This boundary rectangle can be m
    5 KB (785 words) - 22:32, 16 December 2019
  • WMS:Hydrologic Modeling Wizard Overview
    ...he '''Hydrologic Modeling Wizard''' tool in the [[WMS:Get Data Toolbar|get data toolbar]] ([[Image:GetDataToolbar1.png]]). == Watershed Data ==
    11 KB (1,687 words) - 18:07, 15 January 2024
  • WMS:2D Grid Module Project Explorer
    ...cking on a dataset brings up a list of options that are available for that data type. In the 2D Grid module, when a dataset is right-clicked, a menu appear ...ed through the ''Project Explorer''. When an index map has been created or read into WMS, a folder appears in the ''Project Explorer'', named ''Index Maps'
    6 KB (941 words) - 23:19, 16 May 2019
  • WMS:HEC-1
    * '''Read Solution''' – Opens the HEC-1 solution files. ...er, errors will occur or data will be lost if a file with a blank field is read into WMS.
    8 KB (1,229 words) - 17:34, 24 March 2020
  • WMS:Setting up Film Loops
    ...e Save button. Previously saved film loops can be read from disk using the Read button (they can also be run using any AVI playing software, or included in ...ime step strip. The range displayed in the strip corresponds to the scalar data set.
    4 KB (674 words) - 20:25, 16 June 2022
  • WMS:Get Data Toolbar
    {{TOC_right}}The ''Get Data'' toolbar is used to get data. ...ommunity of users it is convenient to catalog the necessary files. WMS can read a database catalog and then automatically open any files that fit within a
    6 KB (969 words) - 14:28, 1 May 2018
  • SMS:GenCade Modeling Process
    ==Required Input Data== The model requires the following data for input:
    4 KB (582 words) - 16:42, 22 September 2017
  • GMS:MODFLOW Name File Dialog
    ...ng the '''Name File''' command under the ''MODFLOW'' menu, shows the files read and written when running a MODFLOW simulation. It allows the unit numbers t ...' button in the ''Edit Unsupported'' column. This will bring up the ''View Data File'' dialog or the text editor of choice where the selected package file
    962 bytes (147 words) - 16:53, 9 March 2017
  • SMS:ADH Boundary Condition File Cards
    | || || align="center" width="40px" | <u>Read</u> || align="center" width="40px" | <u>Edit</u> || align="center" width=" | || || align="center" width="40px" | <u>Read</u> || align="center" width="40px" | <u>Edit</u> || align="center" width="
    19 KB (2,781 words) - 20:29, 11 September 2023
  • WMS:2D Scatter Point Module
    The Scatter Point module is used to interpolate from groups of scattered data points to grids or TINs. The Scatter Point module can be used to interpolat ...File:Create Points Tool.svg|14 px]] tool. The most common use of scattered data is for creating water surface elevations to compute a floodplain delineatio
    3 KB (470 words) - 21:28, 4 May 2020
  • WMS:Storm Drain
    ...ematic]] from the coverage. After having done this, define model specific data on the hydraulic schematic in the [[WMS:Project Explorer Contents for River ...specific data in the river module (currently, only [[WMS:SWMM|SWMM model]] data is supported).
    5 KB (866 words) - 16:25, 3 January 2019
  • WMS:HEC-HMS Gages
    ...ine gage weights for each sub-basin using the Thiessen polygon method. The data required for the "User Gage Weighting" method are shown below: ...RADAR grids are read by selecting the [[WMS:HEC-HMS Convert Grids|'''Radar Data&rarr;Rain Gages''']] button and defining the grids and the time step associ
    3 KB (470 words) - 16:23, 11 October 2017
  • SMS:ADH Bed Layers Assignment
    ...ble by dragging the window edges to increase visibility of the spreadsheet data. ...ng, else the global specification values of the bed layer are displayed as read-only. The check box is disabled if a layer conflict exists and ''Edit'' is
    6 KB (973 words) - 20:11, 11 September 2023
  • WMS:Model Wrapper
    ...ead solution on exit'' &ndash; Turning this option on imports the solution data into WMS once the model run is complete. It is recommended to always have t
    1 KB (173 words) - 19:24, 10 May 2019
  • SMS:PBL
    * ''Wind Output'' and ''Output Options'' simply define what data for PBL to output. ==Hurricane Data (HURDAT) File==
    6 KB (1,057 words) - 14:12, 11 June 2019
  • WMS:HSPF Automatic Segmentation of Land Segments
    ...ons, and a land use layer which contains land-use type polygons or gridded data. The two layers, or coverages, are compared to determine the land-use types * A watershed must be delineated and basin data computed.
    3 KB (394 words) - 15:34, 12 October 2017
  • WMS:TR-20
    * '''Read Solution''' &ndash; Brings up the ''Read TR-20 Solution'' dialog where the simulation solution file can be selected ...[[WMS:TR-20 Edit Parameters|''Edit TR-20 Parameters'']] dialog for adding data to basins, outlets, and diversion.
    9 KB (1,402 words) - 17:25, 29 July 2022
  • SMS:Time Series
    # Times series can support more than 2 columns of data. # The units of each column can be specified (from a list) and the column data will be converted when switching between units.
    4 KB (650 words) - 16:31, 10 March 2017
  • SMS:GenCade Result Visualization
    ...m and maximum shoreline positions during the simulation. When this file is read, SMS adds several datasets to the project explorer representing: ...plot options, frame the data, set the plot attributes, or export the plot data in tabular or image form.
    4 KB (601 words) - 16:54, 22 September 2017
  • SMS:Import Spectra
    * ''*.cdip'' &ndash; Data from the [https://cdip.ucsd.edu/ Coastal Data Information Program]. If spectral data is in multiple files, the option to place these files in one coverage. This
    5 KB (765 words) - 15:32, 6 September 2017
  • SMS:1D River Module
    ...dule include tools to process digital terrain (scattered datasets) and map data (coverages) to build the basic geometry necessary for a 1D Hydraulic Model. # Export the GIS data and finish defining HEC-RAS (or other models).
    8 KB (1,328 words) - 21:48, 24 March 2022
  • GMS:File Menu
    ; New : Deletes all data associated with all data types and all modules. It resets the status of the program to the default s ; Open... : This command is used to read in project files and to import data or other files generated outside of GMS.
    4 KB (607 words) - 22:39, 10 March 2022
  • GMS:Converting 3D Grids to Other Data Types
    ...h as 2D grids, 2D scatter points, 3D meshes, or 3D scatter points. 3D grid data is converted using the following commands in the Grid menu: ...his command is typically used in conjunction with the '''3D Data &rarr; 2D Data''' command.
    5 KB (933 words) - 14:47, 19 October 2017
  • WMS:WMLib
    ...n be used to write an HEC-1 input file and to run HEC-1. The API can then read the HEC-1 output hydrographs for each sub-basin and lag the hydrographs bas ...ed programming language, you do the following to run an HEC-1 analysis and read the HEC-1 solution file:
    6 KB (767 words) - 15:07, 16 June 2014
  • SMS:NOAA HURDAT
    ...years after the events occur. The format is slightly easier for humans to read. ...SMS recognizes this format using the file extension of ''.hurdat2''. This data is accessible from [http://www.aoml.noaa.gov/hrd/hurdat/Data_Storm.html NOA
    7 KB (1,040 words) - 16:19, 26 September 2017
  • WMS:HEC-RAS
    Before loading the data into HEC-RAS, the simulation needs to be saved in HEC-RAS GIS export format ...GIS File'''). This file can be opened inside of WMS. Once this solution data has been loaded into WMS, plots can be generated from the solution. For in
    7 KB (1,097 words) - 20:32, 8 June 2023
  • SMS:CMS-Wave Spectral Coverage
    ...om various locations defined in a nesting file. Within SMS, this spectral data is defined using a spectral coverage. Each node in this coverage can be as ==Creating Spectral Data==
    3 KB (410 words) - 14:34, 30 March 2017
  • WMS:HSPF
    WDMUtil should be used for post-processing after running an HSPF simulation. Read the WDM file from the HSPF simulation into WDMUtil and view the “External ...click of a button within the ''HSPF Global Options'' dialog box. Once the data is initialized, it's possible to access the various dialog boxes within the
    8 KB (1,258 words) - 15:27, 6 February 2017
  • WMS:What's new in WMS version 8.4
    ...ind and download data from the internet and to modify existing time series data. DEM File won't read in: 2084
    6 KB (892 words) - 14:28, 12 September 2016
  • WMS:TR-20 Basin Data
    [[File:TR20basindata.png|thumb|400 px|Example of the ''TR-20 Basin Data'' dialog.]] ...n Multi-select mode. If selecting and assigning data to these fields, this data is assigned to all the selected sub-basins.
    5 KB (784 words) - 17:18, 9 June 2023
  • WMS:Repeated Use of an Equation
    ...et up the equation in a text file in the same directory as WMS. It will be read in and set up as the user defined equation automatically. To do this, creat ...st of equations that can be selected when defining travel times from basin data.
    4 KB (668 words) - 15:07, 29 September 2017
  • WMS:Orange County Rational Method
    * '''Read Simulation''' &ndash; Imports solution files in the Orange County Rational Once all relevant data has been recorded and entered into a Orange County analysis, a rational met
    5 KB (711 words) - 21:30, 21 November 2023
  • WMS:MODRAT WMS Interface
    ...ns have been developed in WMS to facilitate the definition of MODRAT input data. Furthermore, MODRAT can be launched directly from WMS through menu options ...ding_MODRAT_Files|'''Save MODRAT File''']] &ndash; Saves all MODRAT input data to standard MODRAT input files.
    3 KB (434 words) - 15:43, 12 October 2017
  • WMS:TR-20 Routing Data
    [[File:TR20routingdata.png|thumb|400 px|Example of the ''TR-20 Routing Data'' dialog.]] ...ns are generated automatically when writing a TR-20 file. However, routing data must be entered in order to simulate the movement of a flood wave through t
    5 KB (795 words) - 21:00, 13 December 2023
  • WMS:MODRAT
    Once the data for MODRAT input have been defined, the MODRAT model may be launched direct #Create a new MODRAT input file from the data in WMS and run it. To do this, make sure the ''Save file before run'' check
    6 KB (1,061 words) - 22:44, 12 December 2016
  • WMS:File I/O
    ...e exported from WMS to files by selecting the '''Export''' button in the ''Data Browser''. Datasets can be saved as either binary or ASCII dataset files. S ...ard disk into internal memory. Only one time step of one scalar dataset is read into internal memory at any given time. This method of file manipulation re
    2 KB (307 words) - 15:50, 24 February 2016
  • SMS:ASCII Dataset Files *.dat
    OBJTYPE type /* Type of object data set is associated with */ BEGSCL /* Beginning of scalar data set */
    10 KB (1,269 words) - 20:53, 19 January 2018
  • WMS:File Import Wizard
    WMS can read many files generated by other software in their native format. Refer to [[W ...pen''' command from the ''File'' menu, it can also be initiated by pasting data from a text file or spreadsheet into WMS using the [[WMS:Edit Menu#Paste|Pa
    4 KB (689 words) - 20:51, 4 May 2020
  • SMS:CMS-Wave Menu
    ...information from the model control, the boundary conditions, and quadtree data to create the files in preparation for CMS-Flow to work. ...letion of the launch, the analysis is complete and results are ready to be read and displayed by SMS.
    3 KB (439 words) - 15:39, 16 August 2022
  • WMS:Feature Object Guidelines
    ...ing them are included in the [[WMS:Map Module|Map Module]]. Feature object data can be used by itself to create a watershed model for hydrologic analysis o ...can be created automatically from points, lines, and polygons. Since these data are often already developed and stored in a GIS, importing from [[WMS:Impor
    4 KB (742 words) - 16:00, 26 October 2017
  • GMS:SEAWAT
    ...al. It is assumed that the reader has a basic knowledge of SEAWAT and has read the SEAWAT documentation. ...nting to the MODFLOW and MT3D model's package files. These files are then read by SEAWAT and executed, and real/actual head values are output by SEAWAT v4
    5 KB (768 words) - 14:34, 16 August 2017
  • WMS:Orange County Unit Hydrograph
    * '''Read Solution''' &ndash; Opens the HEC-1 solution files. Requires a basin or out * [[WMS:Basin HEC-1 Cards|Basin data]]
    6 KB (903 words) - 15:59, 14 December 2023
  • WMS:Edit Menu
    ...command in the ''File'' menu except that the '''New''' command deletes all data in all modules. ...are determined by the data that is read into WMS. For example, if a TIN is read in which has coordinate vertices in meters then WMS should be told that the
    8 KB (1,243 words) - 19:30, 1 May 2020
  • SMS:Model Coverage File
    ...n traditionally used by SMS. Instead, the model specific data is stored as data components in the project. ...The attribute would include the link to the file, but if the "dmc" file is read into a project on a different machine, the external file would not be in th
    2 KB (371 words) - 19:10, 15 August 2022
  • Lidar Support
    ...n And Ranging. This technology is used to gather a large amount of survey data from fixed wing aircraft or helicopters as they fly over the survey region. ...ly it has an extension of ".las" or ".laz") is a survey file that includes data points gathered from a LIDAR system and processed.
    4 KB (697 words) - 14:17, 10 June 2019
  • GMS:Active/Inactive Points
    ...wever, in preparing the data for import, it is discovered that some of the data values are missing. One approach is to make up a dummy value for the missin ...ely to be encountered such as -999. Then, as the dataset columns are being read, any value with the NONDETECT value is assumed to be inactive and the statu
    3 KB (514 words) - 19:29, 1 December 2023
  • WMS:WMS User Manual vol. 3
    :[[WMS:GSSHA Join SSURGO Data|GSSHA Join SSURGO Data]] :[[WMS:GSSHA Solution Data|GSSHA Solution Data]]
    9 KB (1,250 words) - 19:04, 5 May 2022
  • WMS:Get Data Tool
    ...'''Get Data''' [[File:WMS GetDataToolIcon.svg|16 px]] tool is used to get data from the web or from a catalog file. ...ommunity of users it is convenient to catalog the necessary files. WMS can read a database catalog and then automatically open any files that fit within a
    5 KB (828 words) - 15:35, 23 January 2018
  • GMS:What's New in GMS 8.2
    ...nt dataset and cell activity - into ArcMap (or any other software that can read shapefiles). #:*GMS now computes velocity vectors from MODFLOW CCF data taking into account the porosity and saturated thickness.
    1 KB (217 words) - 14:26, 12 September 2016
  • SMS:Mesh Data Menu
    Most of the SMS modules have a ''Data'' menu, but the items in this menu are different for each module. The [[SM ...ataset Toolbox|Dataset Toolbox]] {{Anchor|Dataset Toolbox}} : Opens the ''Data Toolbox'' containing various tools to work with datasets.
    6 KB (861 words) - 16:24, 17 March 2022
  • GMS:MODFLOW-USG Observations
    ==Generating Observation Data== ...observation data may occur manually by selecting the '''Generate PEST Obs. Data''' button in the ''MODFLOW-USG Observations'' dialog (''MODFLOW'' | '''Obse
    11 KB (1,745 words) - 14:31, 26 October 2017
  • WMS:ASCII Dataset Files
    |ND numdata||/* Number of data values */ |TS istat time||/* Time step of the following data. */
    7 KB (1,108 words) - 16:44, 17 February 2014
  • WMS:CAD Data
    WMS uses a third party set of DLLs to read CAD files. This is done so that WMS can stay current with evolving changes ==Saving CAD Data==
    7 KB (1,118 words) - 22:21, 2 April 2021
  • SMS:Scatter Breakline Options
    ...than one breakline, and the breakline must be defined sequentially in the data file. The breakline column of the data file includes the name of the breakline this vertex belongs to. If the bre
    4 KB (498 words) - 21:48, 4 August 2020
  • WMS:EPANET
    ...GIS data files and map their attributes to the EPANET model attributes, or read and edit existing EPANET models.
    3 KB (440 words) - 18:55, 5 June 2023
  • WMS:Project Explorer Contents for Map Module
    ...he Project Explorer, but it is anticipated that in future versions the CAD data will also be controlled from the Project Explorer. Right-clicking on the Map Data folder [[File:Map Folder.svg|16 px]] allows creating a '''New coverage''' o
    4 KB (520 words) - 23:45, 17 December 2019
  • SMS:CMS-Flow/Save Points
    ...coverage is created and a link will appear under the grid in the tree item data.<br /><br />&ndash; OR &ndash;<br /></li></ul> <li>Right-click on ''Map Data'' and select '''New Coverage'''. Find ''CMS-Flow Save Points'' under ''CMS
    4 KB (632 words) - 14:26, 17 June 2019
  • SMS:CMS-Wave Control File
    The old parameter file always contain a single line of data defining the parameter options for the simulation. This line will include e |rowspan="3"| icur || 0, no current file read
    6 KB (785 words) - 16:09, 17 November 2016
  • XMS:What's New in SMS 11.1
    .... SMS now accesses a number of new web sources for image and/or elevation data using the previous web source tools. ...ected to a user specified projection for display. This makes working with data in various projections much easier and less prone to round-off or conversio
    9 KB (1,399 words) - 15:35, 24 September 2018
  • WMS:DEM Guidelines
    ...While a DEM results in data redundancy for surface definition, its simple data structure and wide-spread availability have made them a popular source for ...cumulations for DEM points are computed using TOPAZ ('''Compute TOPAZ Flow Data''' command in the ''Drainage'' menu). This program uses an eight-point pour
    6 KB (976 words) - 22:52, 12 May 2020
  • Raster Options
    ...software provides a number of options for importing and displaying raster data. |SDTS||*.ddf||http://data.geocomm.com/dem/demdownload.html||5||Supported in GMS and supported in SMS
    4 KB (665 words) - 20:18, 24 May 2022
  • GMS:Importing MODFLOW Files
    ...e files were created by GMS, and the user has the GMS project file (.gpr), read that into GMS using the standard ''File'' | '''Open''' command. If the user #*: Read the basic package file into GMS (using the standard ''File'' | '''Open''' d
    18 KB (2,918 words) - 14:37, 26 October 2017
  • WMS:GSSHA Multiple Simulations
    ...ting '''Read Solution''' to bring up the [[WMS:GSSHA#Read GSSHA Solution|''Read GSSHA Solution'' dialog]]. :*Right-click on the "[[File:2D Grid Folder.svg|14px]] 2D Grid Data" folder and select '''Open GSSHA Group...''' to bring up an ''Open'' dialog
    12 KB (1,972 words) - 19:35, 7 June 2021
  • SMS:PTM Sediment File
    ...nterface, if one is required, by pressing the '''Create input file(s) from data...''' button on the ''Files'' tab of the [[SMS:PTM_Model_Control|''PTM mode # The first line is a comment line that is not read by PTM.
    4 KB (514 words) - 19:03, 11 August 2016
  • SMS:WAM Graphical Interface
    *'''Read Spectra Files''' ...e data in the IntOut### solution files into an HDF5 format so that SMS can read them. This allows for post processing of the datasets. SMS writes a script,
    10 KB (1,710 words) - 19:57, 30 September 2022
  • SMS:RiverFlow2D
    * Data Visualization *''Control Data'' &ndash; Sets the model run control parameters like run time and time step
    10 KB (1,520 words) - 14:32, 18 June 2019
  • WMS:TOPAZ
    ==Computing Flow Data with TOPAZ== ...en start the TOPAZ program. When TOPAZ is finished, WMS will automatically read the flow directions (FLOVEC.DAT) and flow accumulations (UPAREA.DAT) comput
    4 KB (558 words) - 18:47, 8 November 2023
  • SMS:File Menu
    ; '''New''' : Deletes all the data associated with all modules. It resets the status of the program so that al ...o use when reading in the file. Data from the file is added to the current data base and SMS updates the display.
    9 KB (1,634 words) - 19:31, 16 March 2022
  • WMS:Project Explorer Contents for Hydrologic Modeling Module
    Right-clicking on the main Hydrologic Tree Data folder [[File:Hydrologic Module Folder.svg|16 px]] allows creating a new fo *'''Read Solution''':
    3 KB (384 words) - 20:11, 26 December 2019
  • WMS:Radar Rainfall
    ...ding and utilizing radar rainfall data from the National Weather Service. Data can be used with either the HMS or GSSHA hydrologic models. To use radar rainfall data with HMS, create an HMS model as normal. If desired, use the [[WMS:Hydrolo
    17 KB (2,845 words) - 21:36, 3 February 2023
  • GMS:MF6 GNC Package
    ...he list of GNC information will be written to the listing file after it is read. *''GNCData'' &ndash; Area where data specific to GNC and the Ghost Nodes can be reviewed.
    2 KB (256 words) - 20:42, 15 March 2022
  • SMS:CGWAVE Incident Wave Conditions
    ...ncident Wave Conditions data. SMS prompts to replace or append to existing data. See the CGWAVE documentation for the Incident Wave Conditions file format. ; Clear : The '''Clear''' button deletes all of the Incident Wave Conditions data.
    3 KB (504 words) - 22:41, 16 May 2018
  • GMS:FEMWATER
    ...This manual contains a description of the input requirements and should be read completely before using GMS to set up a problem. |CON||Convergence Data
    3 KB (467 words) - 16:58, 11 August 2017
  • WMS:Projections
    ...XMS software, a projections are associated with the project and individual data objects. ...ed with the object projection so when the XMS package saves a project, the data files are not modified.
    9 KB (1,438 words) - 15:18, 20 January 2020
  • WMS:WMLibHydroTree
    ...ydrologic tree in the WMLib. Most operations involving adding or managing data in sub-basins or outlet points require a hydrologic tree. ...gic information (including sub-basin names, areas, curve numbers, rainfall data, and time of concentration) needs to be setup before running the HEC-1 mode
    5 KB (713 words) - 19:08, 11 January 2017
  • WMS:Diversion HEC-1 Cards
    ==''HEC-1 Diversion Data'' Dialog== ...r the diversion can be defined and/or edited by selecting the '''Diversion Data''' button from the ''Edit HEC-1 Parameters'' dialog.
    5 KB (781 words) - 22:44, 13 July 2020
  • WMS:What's new in WMS version 10.0
    ...ther hydrologic parameters can be interpolated to your grid from scattered data and then exported to your HMS ModClark model. ...ly online data sources available from the WMS interface to collect all the data required and build an HMS model for any part of the United States.
    8 KB (1,190 words) - 23:36, 9 January 2023
  • SMS:Spatial Data Coverage
    ...ode by the right-click menu of a single selected node. From this menu the data associated with the node can be created, viewed, modified, or deleted. The following types of data are supported (right-click options are described):
    7 KB (1,108 words) - 22:13, 23 July 2019
  • GMS:FEMWATER Initial Conditions
    ...ignate that the pressure head varies spatially and that the values will be read from a dataset file. If this option is selected, the name of the file must ...fined initial condition may even prevent convergence. In most cases, the ''Read from dataset file/Generate IC'' option should be used since it results in a
    8 KB (1,283 words) - 15:59, 17 August 2017
  • WMS:SMPDBK
    ...rom dam-break floodwaters while substantially reducing the amount of time, data, and expertise required to run a simulation of the more sophisticated unste ...l for situations where reconnaissance level results are adequate, and when data and time available to prepare the simulation are sparse. Unlike the more so
    7 KB (1,030 words) - 20:44, 8 June 2023
  • SMS:Q&A BOUSS2D
    ...ure you are in the Cartesian grid module by selecting the ''Cartesian Grid Data'' menu in the project explorer. Now, select the '''Select Grid Cell''' too ...e unstable points of the grid where potential problems may occur. You can read these datasets into SMS and plot to better understand the meaning of them a
    2 KB (326 words) - 16:17, 11 December 2017
  • WMS:MODRAT Edit Parameters
    ...tems under the Basin Data heading are active and all items under the Reach Data heading are inactive. ...aphical modeling tools have been used to define the watershed from digital data, the area of each subarea will be automatically computed and will appear in
    13 KB (2,111 words) - 16:00, 14 December 2023
  • GMS:HydroGeoSphere Simulation Control
    ...be left as is, or it can be changed in the ''Simulation Control'' dialog. Data input options include, but are not limited to: time stepping, output, zones ...ialog for the HydroGeoSphere model is where general settings for the input data on the other tabs of the ''Simulation Control'' dialog are defined. This ta
    10 KB (1,493 words) - 21:59, 30 April 2024
  • SMS:Binary Dataset Files *.dat
    ...editor. The binary format is patterned after the ASCII format in that the data are grouped into "cards". However, the cards are identified by a number ra |The number of data values that will be listed per time step. This number should correspond t
    11 KB (1,526 words) - 16:01, 26 September 2017
  • SMS:Scatter Module
    ...eighted. The module is also used to view and edit survey data (i.e. SHOALS data). ...The actual bathymetry comes from the scattered data. SMS interpolates this data to the created mesh or grid points.
    12 KB (1,843 words) - 14:43, 26 June 2018
  • SMS:Synthetic Storm Coverage
    ...ius information, speeds, and Holland B values can come from an analysis on data collected during the storm. However, if the simulation is intended for desi Once the track locations have been defined, define the associated data for the track (central pressures, Holland B, storm radius, etc.). The US Ar
    4 KB (592 words) - 16:15, 19 September 2017
  • SMS:BOUSS Runup / Overtopping Input Files
    Each of these can be read/written by SMS. The prefix for each file will follow this format: "coverage ...s on each transect. This file contains model control information, 1-d grid data, and the wave maker parameters. Each parameter file represents a unique sim
    2 KB (268 words) - 14:34, 7 September 2016
  • SMS:Q&A ADCIRC
    ...ple model you are working on. This would ensure there is more than enough data for the complete model run time. ...a specified initial water depth at the boundary to be used in calculating data such as velocity, and others.
    4 KB (675 words) - 16:16, 11 December 2017
  • SMS:CMS-Flow Menu
    ...information from the model control, the boundary conditions, and quadtree data to create the files in preparation for CMS-Flow to work. ...letion of the launch, the analysis is complete and results are ready to be read and displayed by SMS.
    4 KB (554 words) - 22:20, 18 January 2022
  • Projections
    ...n XMS software, projections are associated with the project and individual data objects. ...ed with the object projection so when the XMS package saves a project, the data files are not modified.
    10 KB (1,499 words) - 23:06, 16 March 2022
  • SMS:PTM Trap Output
    ..._count.out". If the extension has been modified, SMS can be instructed to read this file using the file import wizard. [[Category:Exporting Data|ptm]]
    4 KB (656 words) - 15:47, 29 November 2017
  • SMS:SRH-2D Menu 13.0
    ...rmation from the model control, the boundary conditions, and the materials data to create the files in preparation for SRH-2D to work. ...letion of the launch, the analysis is complete and results are ready to be read and displayed by SMS.
    2 KB (336 words) - 18:14, 20 January 2023
  • GMS:ART3D
    ...out and ART3D runs from within GMS. On completion, the solution files are read into GMS for [[GMS:MODFLOW#Post-Processing|post-processing]]. ...estimation run. See the section on adding [[GMS:Observations|Observation data]].
    8 KB (1,317 words) - 14:41, 4 June 2019
  • WMS:Binary Dataset Files
    ...igure 1. The binary format is patterned after the ASCII format in that the data are grouped into "cards". However, the cards are identified by a number rat |The number of data values that will be listed per time step. This number should correspond to
    10 KB (1,463 words) - 16:45, 17 February 2014
  • SMS:Project Explorer Right-Click Menus
    ...ble entities to [[SMS:CAD Data|CAD]] format. CAD layers are shown in a CAD Data folder in the Project Explorer. ...ble entities to [[SMS:CAD Data|CAD]] format. CAD layers are shown in a CAD Data folder in the Project Explorer.
    7 KB (1,019 words) - 18:58, 18 March 2022
  • GMS:Dataset Files
    ND numdata // Number of data values TS istat time // Time step of the following data
    15 KB (2,172 words) - 20:15, 14 September 2015
  • WMS:DEM Basins
    ==Compute Basin Data== ...feature objects, and also has a background DEM, compute most of the basin data parameters using the following steps:
    10 KB (1,729 words) - 20:51, 20 May 2020
  • SMS:File Import Wizard Supported File Formats
    The following types of data can be imported into SMS via the [[SMS:File_Import_Wizard|File Import Wizar * Observation Data
    9 KB (1,187 words) - 16:55, 21 February 2019
  • GMS:What's New in GMS 9.0 Text
    ##UZF package option to save only groundwater data ##CCF files are read more generically and data in unsupported packages is imported
    5 KB (713 words) - 14:31, 12 September 2016
  • SMS:Introduction to Setting up SMS
    ...h project also saves settings associated with the project. As a project is read, the values are set to the project settings. The default settings only appe ...heck that the installation diectory is a valid location and that it isn't "read-only."
    4 KB (648 words) - 17:44, 15 April 2016
  • SMS:ADCIRC Model Control 12.3 and earlier
    SMS uses the following databases to provide the tidal constituent data to an ADCIRC simulation: ...read and create these other file types, it does tell ADCIRC that there is data there, where it is, and how to access it for a simulation to run correctly.
    11 KB (1,680 words) - 16:00, 11 December 2018
  • GMS:UTCHEM
    ## *.utc contains the actual UTCHEM input information. This file can be read separately by GMS. ## *.uts is the UTCHEM super file and is only read by GMS. When choosing the '''Open''' command from the ''File'' menu, a *.ut
    8 KB (1,267 words) - 14:43, 4 June 2019
  • WMS:Creating TINs
    ...''DEM'' menu of the Terrain Data module. In other words, it is possible to read in portions of the DEM and interpolate to TIN multiple times. Elevations fo ...triangulating a set of xyz scatter points, or importing a TIN from another data source, it is not likely that this condition will exist. Creating a new TIN
    4 KB (617 words) - 15:24, 19 April 2016
  • GMS:SEEP2D Display Options
    ...[[GMS:Display Options#General_Display_Options|''Show options for existing data only'']] option is turned off. It can also be accessed from the from the '' ...nd. This solution represents "flow potential" values. When the solution is read back into GMS, these flow values can be contoured to generate a plot of flo
    4 KB (678 words) - 22:06, 4 April 2022
  • GMS:Viewing Computed Fluxes
    ...bserved flows has been entered, the next step is to run the MODFLOW model, read in the solution, and compare the computed flows to the observed flows. The ...ting a set of cells and selecting the '''Flow Budget''' command from the ''Data'' menu in the 3D Grid module. This command brings up the ''Flow Budget'' di
    2 KB (301 words) - 16:19, 25 August 2017
  • SMS:SRH-2D Menu
    :*[[SMS:Floodway Tools|'''Compare Simulation Data (Beta)...''']] ...rmation from the model control, the boundary conditions, and the materials data to create the files in preparation for SRH-2D to work.
    3 KB (518 words) - 22:11, 20 December 2023
  • GMS:MF6 UZT Package
    **''DATA'' &ndash; Turn on to make the ''DATA'' section visible. ...xiliary variables that can be provided, but subsequent blocks will require data for each of the auxiliary variables that are defined. Turning this on will
    12 KB (1,901 words) - 20:49, 15 March 2022
  • GMS:UTEXAS
    ...s as a convenient way to watch the progress of the model and automatically read in the results upon completion. Again, since UTEXAS is a Windows applicatio # Read the solution into GMS
    11 KB (1,742 words) - 15:12, 7 June 2019
  • GMS:Run MODFLOW
    ...solution on exit'' &ndash; Turning on this option will cause the solution data to automatically be imported into GMS.
    2 KB (356 words) - 17:18, 24 March 2022
  • GMS:MF6 LKT Package
    **''DATA'' &ndash; Turn on to make the ''DATA'' section visible. ...xiliary variables that can be provided, but subsequent blocks will require data for each of the auxiliary variables that are defined. Turning this on will
    12 KB (1,961 words) - 20:40, 15 March 2022
  • SMS:CGWAVE Graphical Interface
    ...es functionality to convert datums, reverse directions and smoothor filter data.</li> ...to areas of at least one meter of depth, use the following equation in the data calculator ''max(d1, 1.0)'' (where d1 is the label for the depth dataset).<
    8 KB (1,328 words) - 15:03, 23 March 2022
  • WMS:What's new in WMS version 8.1
    ...export the delineated watershed boundaries and the WMS-computed watershed data to [http://www.xpsoftware.com/ xpswmm] or [http://www.epa.gov/ednnrmrl/mode ...nfall data from the National Weather Service]. This feature allows you to read a set of NEXRAD rainfall grids and compute the Thiessen polygon-based gage
    10 KB (1,638 words) - 14:52, 6 June 2018
  • GMS:MF6 MWT Package
    **''DATA'' &ndash; Turn on to make the ''DATA'' section visible. ...xiliary variables that can be provided, but subsequent blocks will require data for each of the auxiliary variables that are defined. Turning this on will
    12 KB (1,987 words) - 21:25, 15 March 2022
  • SMS:What's New in SMS 11.2
    ...attributes of an interface for a specific model in an XML file. SMS will read this file when launched, and then interact with the model. This schema is ...file as either a scatter set or a raster. SMS also loads an image of the data in the specified format.
    11 KB (1,683 words) - 20:55, 9 January 2023
  • GMS:MF6 SFT Package
    **''DATA'' &ndash; Turn on to make the ''DATA'' section visible. ...xiliary variables that can be provided, but subsequent blocks will require data for each of the auxiliary variables that are defined. Turning this on will
    12 KB (1,986 words) - 21:16, 15 March 2022
  • WMS:River Tools
    ...' provides the tools and commands necessary to build 1D Hydraulic modeling data from feature object coverages. The ''River Tools'' primarily support the HE Results data from HEC-RAS and other hydraulic models can be read back in and used to perform a floodplain delineation. The floodplain deline
    5 KB (810 words) - 22:55, 4 May 2020
  • SMS:CGWAVE Files
    ...ll the "standard" comments exist. The model parameter data is sequentially read, and follows the following format: ...parameter data comes the boundary definition. This includes two blocks of data marked with "&C" to indicate a boundary open to have waves enter, and "&B"
    8 KB (986 words) - 16:16, 20 September 2017
  • GMS:File Formats
    GMS makes use of a wide range of formats for both input and output data. ...re projects as a project group file (*.gpr). Feature objects, projections, data objects, and other general settings will be saved. This file will reference
    8 KB (934 words) - 23:23, 27 December 2017
  • WMS:What's new in WMS version 8.2
    [[Image:WebServices.png|thumb|400px|right|Web Data Service Options]] ...d from the hydrologic modeling wizard. In WMS 8.2, practically all of the data required for a hydrologic study can be downloaded directly from WMS for any
    4 KB (642 words) - 22:04, 15 May 2019
  • GMS:MODFLOW Post-Processing Viewing Options
    ...]] package dialogs. If the MODFLOW data are in memory when the solution is read in, GMS will automatically use the No flow head and Head assigned to dry ce ...m GMS. The file is in *.csv format so that spreadsheet programs can easily read and format the file into columns. Two examples are shown below.
    9 KB (1,502 words) - 21:54, 17 October 2017
  • SMS:Quick Tour - Modules
    ...ular Networks (TINs) or Digital Elevation Maps (DEMSs) used for background data. [[File:GIS Module Icon.svg|16 px]] '''GIS'''. Used to read in GIS objects directly using ARC objects. Includes tools to select groups
    3 KB (381 words) - 16:26, 1 September 2017
  • WMS:File Menu
    ...' [[File:New Macro.svg|12 px]] macro, deletes all data associated with all data types and all modules. As a result, a warning message will appear asking if ...nd (Ctrl+O), or '''Open''' [[File:Open Macro.svg|16 px]] macro, is used to read all files. Unlike previous versions of WMS where the '''Open''' command was
    9 KB (1,607 words) - 22:38, 12 May 2020
  • SMS:ADCIRC Coverage 12.3 and earlier
    * Read in an existing coastline file (*.cst) (see [[SMS:Map Feature Objects Menu#M ...rom a [[SMS:Scatter Module|scatter set]] using the [[SMS:Scatter Data Menu#Data Conversion Commands|'''Scatter Contour to Feature''']] command.
    3 KB (494 words) - 14:25, 17 June 2019
  • SMS:What's New in SMS 11.1
    .... SMS now accesses a number of new web sources for image and/or elevation data using the previous web source tools. ...ected to a user specified projection for display. This makes working with data in various projections much easier and less prone to round-off or conversio
    13 KB (1,958 words) - 21:06, 9 January 2023
  • SMS:Release Notes SMS 11.1
    *7428 If a New Project is Read in, The Projection is set before the old data is check on or cleared out *7366 SMS doesn't read the files associated with a B2D Project quite right
    23 KB (3,874 words) - 23:46, 9 January 2023
  • SMS:What's New in SMS 12.1
    * Significant revisions to management of images and GIS data through a new GIS module. * Functionality to load/use cross section and centerline data from HEC-RAS simulations added.
    7 KB (1,168 words) - 18:15, 20 January 2023
  • GMS:FEMWATER Commands
    ...a new FEMWATER simulation. This command will delete any existing FEMWATER data running in GMS. ; Read Solution... : Opens a FEWATER solution file.
    3 KB (380 words) - 22:32, 11 July 2016
  • WMS:MWBM Wizard
    ...ialog is a list of pages that allow modification of various parameters and data to be used in updating and running the GSSHA model. The name of the dialog ==Read Existing Model==
    23 KB (3,644 words) - 20:28, 22 March 2019
  • GMS:MF6 MAW Package
    **''Data'' &ndash; Turn on to make the ''Data'' section visible. This section is on by default. ...i-aquifer well information will be written to the listing file after it is read.
    8 KB (1,130 words) - 22:35, 20 December 2022
  • GMS:MF6 UZF Package
    **''DATA'' &ndash; Turn on to make the ''DATA'' section visible. This section is on by default. ...te the list of UZF information to the listing file immediately after it is read.
    6 KB (889 words) - 20:49, 15 March 2022
  • GMS:MT3DMS
    ...produce these files even if transport is turned off. These files are then read by MT3DMS and utilized as the flow field for the transport portion of the s ...3DMS is generated by GMS and saved to a set of files. These files are then read by MT3DMS when MT3DMS is executed from the [[GMS:MT3DMS Commands|GMS menu]]
    5 KB (861 words) - 16:11, 24 February 2021
  • GMS:MF6 LAK Package
    **''Data'' &ndash; Turn on to make the ''Data'' section visible. This section is on by default. ...e list of lake information will be written to the listing file after it is read.
    6 KB (918 words) - 21:27, 15 March 2022
  • GMS:MT3DMS Commands
    ...arts a new MT3DMS simulation. This command will delete any existing MT3DMS data running in GMS. ; Read Solution... : The command will open a MT3DMS solutions file.
    3 KB (440 words) - 19:23, 18 April 2022
  • WMS:What's new in WMS version 8.3
    Using WMS 8.3 you are able to select the solution dataset, the scattered data dataset, and the rainfall dataset and export all three to a KMZ file. In t === Improvements on Joining SSURGO Data ===
    5 KB (836 words) - 14:28, 12 September 2016
  • SMS:Mesh Module
    ...ditions. The density of mesh nodes helps determine the quality of solution data and can be important to model stability. See [[SMS:2D Mesh Nodes Menu|2D Me ...re used with visualization options such as contours and vectors as well as data extraction tools like observation profile plots.
    7 KB (1,055 words) - 19:53, 14 February 2023
  • GMS:What's New in GMS 8.0
    ...stress periods you can create. However there are no limits on what you can read (but models that exceed the limits cannot be saved). ...server layers can be opened in GMS giving you instant access to ESRI's map data (Topo maps etc). The background maps are updated as you zoom and pan. Requi
    4 KB (638 words) - 18:51, 5 May 2022
  • WMS:HEC-1 Job Control
    ...t with dates defined on IN records for precipitation and other time series data. ...ol options''. HEC-1 generates an ASCII output file that can be printed or read into any standard word processing program. The information output is contro
    7 KB (1,119 words) - 17:07, 23 May 2022
  • GMS:Mod-PATH3DU
    ...GMS in that the simulation must be saved and run and then the results are read and displayed, whereas in MODPATH this typically happens automatically when mod-PATH3DU cannot read the MODFLOW-USG files that use the [[GMS:MODFLOW_with_HDF5|GMS modified inp
    12 KB (1,964 words) - 19:31, 8 April 2024
  • GMS:TVM Package
    ** 1 = Prints what is read from the TVM input file, and how many changes occurred each time step. *'''Array to Dataset''' &ndash; Converts the array data into a new dataset that can then be used for other parts of the project. Br
    10 KB (1,594 words) - 21:33, 6 March 2023
  • SMS:Release Notes SMS 12.0
    **8092 - Crash on Exit when working with GIS data **8270 - Tidal Data commands for the Web menu do nothing
    10 KB (1,383 words) - 23:46, 9 January 2023
  • WMS:Datasets
    ...ypes. In order to accomplish this goal, input data for models and solution data (other than those models defined using topological trees) are handled in a The commands for manipulating datasets are located in the ''Data'' menu of the respective modules, and as part of the ''Project Explorer'' w
    10 KB (1,573 words) - 23:04, 4 January 2023
  • GMS:MF6 SFR Package
    **''DATA'' &ndash; Turn on to make the ''DATA'' section visible. This section is on by default. ...streamflow routing information to the listing file immediately after it is read.
    8 KB (1,211 words) - 21:16, 15 March 2022
  • GMS:MODFLOW
    ...MODFLOW are generated by GMS and saved to a set of files. These files are read by MODFLOW when MODFLOW is launched from the [[GMS:MODFLOW Commands|''MODFL ...few minor changes primarily related to file input including reading input data from HDF5 files. These changes are clearly marked in the code. For more inf
    6 KB (866 words) - 14:54, 18 May 2022
  • GMS:MODFLOW Display Options
    The properties of all MODFLOW data that GMS displays on the screen can be controlled through the MODFLOW tab o ...the ground surface. For unconfined layers, the top elevation array is not read by MODFLOW. Only the bottom elevation array is used in the calculations. MO
    6 KB (1,008 words) - 16:35, 2 April 2024
  • WMS:WMS User Manual 9.1
    :[[WMS:Where Can I Get Data?|Where Can I Get Data?]] :[[WMS:Get Data Toolbar|Get Data Toolbar]]
    25 KB (3,355 words) - 22:56, 9 January 2023
  • WMS:WMS User Manual 11.0
    :[[WMS:Where Can I Get Data?|Where Can I Get Data?]] :[[WMS:Get Data Toolbar|Get Data Toolbar]]
    22 KB (2,908 words) - 23:03, 9 January 2023
  • GMS:MODFLOW 6
    *"[[File:Mf6sim data.svg|16 px]] Simulation Data" **'''Read Solution''' &ndash; Loads the solution file for the associated simulation.
    15 KB (2,309 words) - 23:00, 6 May 2024
  • GMS:MODFLOW-USG
    #Older versions of GMS cannot read MODFLOW-USG files written by any non-GMS software. This is because there wa |H5||Hierarchal Data Format (HDF5) Array & List Data
    6 KB (850 words) - 16:19, 15 August 2022
  • WMS:WMS User Manual 11.1
    :[[WMS:Where Can I Get Data?|Where Can I Get Data?]] :[[WMS:Get Data Toolbar|Get Data Toolbar]]
    22 KB (2,917 words) - 21:07, 6 February 2023
  • GMS:3D Grid Viewing Modes
    ...the orthogonal mode. Thus, whenever a new cell-centered grid is created or read from a file, GMS automatically goes into the orthogonal viewing mode ...n controls the display of the vertical variations in stratigraphy based on data from the MODFLOW elevation arrays.
    3 KB (476 words) - 22:30, 21 April 2022
  • WMS:WMS User Manual 10.1
    :[[WMS:Where Can I Get Data?|Where Can I Get Data?]] :[[WMS:Get Data Toolbar|Get Data Toolbar]]
    22 KB (2,974 words) - 23:02, 9 January 2023
  • SMS:CMS-Flow Files
    **''hot_start.h5'' This file has the simulation data including elevations and velocities. **''HOTSTARTx.H5'' (where "x" is a counter) These files have the simulation data including elevations and velocities.
    8 KB (1,161 words) - 19:12, 21 September 2017
  • WMS:WMS User Manual 11.2
    :[[WMS:Where Can I Get Data?|Where Can I Get Data?]] :[[WMS:Get Data Toolbar|Get Data Toolbar]]
    22 KB (2,928 words) - 21:31, 21 November 2023
  • WMS:Louisiana DOTD Modeling Overview
    ==Louisiana Department of Transportation and Development Data Sources for use in WMS== ===Data Sources===
    7 KB (1,000 words) - 22:45, 22 July 2020
  • Lidar
    ...re for display and interpolation. Lidar is typically used to get elevation data for use in a model. ...n. The *.laz extension is simply a compressed *.las file. XMS software can read both types of files. When a lidar file is opened it appears in the [[Projec
    11 KB (1,863 words) - 23:01, 29 November 2022
  • WMS:WMS User Manual 10.0
    :[[WMS:Where Can I Get Data?|Where Can I Get Data?]] :[[WMS:Get Data Toolbar|Get Data Toolbar]]
    23 KB (3,071 words) - 22:58, 9 January 2023
  • WMS:Smoothing DEMs
    ...the ''DEM Import'' dialog if not wanting WMS to smooth automatically. Once read in the DEM can be smoothed using the '''Smooth''' command from the [[WMS:DE ...ld be used in doing so in order to keep from "over smoothing" the original data.
    3 KB (495 words) - 16:46, 7 January 2020
  • GMS:MF6 DISU Package
    ...s unspecified or set to 0, then the VERTICES and CELL2D blocks will not be read, and their sections below will be blank. For most simulations, NVERT should ** ''Define'' &ndash; This allows data within the ''GRIDDATA'' section to be defined. When this is inactive, all o
    11 KB (1,828 words) - 20:39, 15 March 2022
  • GMS:Parameters
    ..._with_HDF5|HDF5]] file, if one of the parameter key values is found in the data then the parameter value is substituted into the array or list.
    5 KB (775 words) - 20:52, 26 April 2022
  • SMS:EWN
    *''Specify slope'' &ndash; Allows specifying data for the slope. Note: In ADCIRC, there is often an instability if the cell s ...isplay Options'' &ndash; This includes a list of the types from a database/data file. These are the available "polygon types" when assigning polygon attrib
    11 KB (1,669 words) - 19:30, 19 September 2023
  • SMS:Holland\PBL
    * Create the number of vertices/nodes that there is data for (adjust their positions manually with the nodes/vertices selected, or s ...dat file obtained on the NOAA website. Access website and save the Easy to Read version of the file. Extension for file must be saved as hurdat in order to
    4 KB (692 words) - 14:11, 11 June 2019
  • SMS:STWAVE Menu 12.3 and earlier
    ...on values are used to simulate whether flow exists or not. If no elevation data is available for part of the grid area, it is important to specify an extra After a simulation has been read or saved, SMS can launch the finite element analysis engine. To run [[SMS:S
    3 KB (469 words) - 21:08, 20 November 2018
  • SMS:BOUSS-2D Model Control
    * ''Input Data Sets'' &ndash; These inputs specify spatially varied input parameters for t ...e model will output time varying datasets. By default, the model will save data at each time step. This would result in huge files, so normally select the
    5 KB (875 words) - 19:29, 2 May 2023
  • SMS:CMS-Wave
    * Data Visualization ...s already been created for a CMS-Wave simulation or an existing simulation read, the grid object will exist in the [[SMS:Project Explorer|Project Explorer]
    6 KB (928 words) - 22:26, 26 April 2023
  • SMS:TUFLOW Model Parameters
    This ''Output Control'' tab specifies what two dimensional (spatially varied) data should be saved in the TUFLOW run. The tab is broken down into three sectio * ''Format'' &ndash; Choose between XMDF and binary data (*.dat) file format or both. (Map Output Format line in the *.tcf file)
    14 KB (2,329 words) - 16:54, 12 August 2019
  • GMS:Risk Analysis Wizard
    ...old analysis'' can be performed using any type of 3D dataset that has been read into the [[GMS:Project Explorer|Project Explorer]]. ...d to synthesize the probability data set can be weighted using observation data. This makes it possible to give more weight to model instances with smalle
    8 KB (1,211 words) - 15:15, 8 September 2017
  • SMS:ADH SMS 13.2 and Earlier
    * [[SMS:ADH Time Series|'''Time Series Data''']] &ndash; Brings up a ''Time Series'' dialog. * '''Read ADH Solution''' &ndash; Opens ADH solution files.
    9 KB (1,311 words) - 20:32, 11 September 2023
  • SMS:BOUSS-2D Using the Model
    ...rtesian grid. If a grid has already been created or an existing simulation read, the grid object will exist in the [[SMS:Project Explorer|Project Explorer] # Right-click on the Map Data [[File:Map Folder.svg|16 px]] item and select '''New Coverage'''.
    9 KB (1,449 words) - 20:17, 19 December 2017
  • GMS:ETS Package
    ...P must be between 0.0 and 1.0, inclusive. Repetitions of PXDP and PETM are read in sequence such that the first occurrence represents the bottom of the fir ...should be between 0.0 and 1.0, inclusive. Repetitions of PXDP and PETM are read in sequence such that the first occurrence represents the bottom of the fir
    9 KB (1,497 words) - 20:14, 5 March 2024
  • GMS:Vertical Markov Chain
    ...shed line represents the transition probability measured from the borehole data by the GAMEAS utility. In general, this curve represents the transition pr ...fit between the Markov Chain model and the observed transition probability data.
    13 KB (2,076 words) - 17:06, 23 March 2023
  • SMS:ADCIRC
    * Data Visualization ...has already been created for a ADCIRC simulation or an existing simulation read, the mesh object will exist in the [[SMS:Project Explorer|Project Explorer]
    14 KB (2,221 words) - 19:11, 10 January 2024
  • GMS:HydroGeoSphere
    *"[[File:Mf6sim data.svg|16 px]] Simulation Data" **'''Read Solution''' &ndash; Loads the solution file for the associated simulation.
    4 KB (625 words) - 19:19, 30 April 2024
  • SMS:Command Objects
    * Enter commands to read GIS data generated outside of SMS. ...ts can define scenarios in order to setup multiple models that have shared data without the need for separate simulation objects. Anything not specified fo
    6 KB (1,004 words) - 15:42, 6 October 2017
  • Import from Web
    ...o the internet, this is an easy and convenient way to acquire this type of data. ..._service web services]. Each of the XMS programs has a number of available data types they can retrieve.
    21 KB (3,398 words) - 19:37, 11 May 2023
  • GMS:RT3D
    The first step in defining an RT3D simulation is to define the data required by the Basic Transport (BTN) package. The options in the [[GMS:Bas ...to add and remove items from the list. The '''Import''' button is used to read a previously defined list of reaction parameters from an RT3D super file (*
    6 KB (983 words) - 21:28, 21 September 2018
  • SMS:Release Notes SMS 10.1
    #Fixed a problem with converting cartesian grid data to a scatterset. #Fixed an issue with scatter datasets created incorrectly sometimes with data calculator.
    12 KB (1,983 words) - 23:45, 9 January 2023
  • GMS:Observations
    The primary type of field data used in a typical calibration exercise is point observations. Point observa ...he Map module. When a MODFLOW solution is imported, the computed flows are read for the arcs and polygons and compared with observed values.
    8 KB (1,287 words) - 18:09, 1 September 2023
  • GMS:Parameter Dialog
    ...a MODFLOW [[GMS:Automated Parameter Estimation|inverse model]], the input data must be parameterized. This is accomplished by assigning a set of key valu ...''' button. When this button is selected, GMS traverses the MODFLOW input data corresponding to legal parameter values and searches for key values. It is
    8 KB (1,311 words) - 16:04, 13 October 2017
  • WMS:Feature Objects Menu
    The '''Delete''' command will delete all feature objects and any unsaved data. See the [[WMS:Coverages|coverages listing]] to read more about the kinds of attributes that feature objects have for each cover
    10 KB (1,698 words) - 21:18, 17 December 2019
  • SMS:Release Notes SMS 11.0
    ...trace animation, some of the particles were not getting the new time step data. This has been resolved. ...nterpolation to nodes that are “inactive”. All nodes now get interpolated data regardless of the state of the connected elements.
    24 KB (3,926 words) - 23:46, 9 January 2023
  • GMS:File Import Wizard Supported File Formats
    ...!--moved to right because of customer complaints that the article can't be read until after scrolling past the TOC--> ...MS:File Import Wizard|''File Import Wizard'']] can import various types of data as described in the tables below.
    24 KB (3,306 words) - 14:08, 14 May 2019
  • GMS:Preferences
    ...tables. The Model Wrapper includes the option to tell GMS to automatically read in the results of the solution upon exiting the Model Wrapper. The box to s ...ROGS]] is used to perform transition probability geostatistics on borehole data.
    20 KB (3,142 words) - 18:50, 5 May 2022
  • SMS:TABS
    ...programs. This utility converts ASCII geometry into binary format and does data checking along the way. SMS will launch this utility as needed before runn ...till be constructed/edited in text editors and SMS can still read solution data.
    5 KB (819 words) - 19:26, 28 January 2021
  • WMS:WMS 8.1 Dialog Help
    * [[WMS:File Menu#Edit File|View Data File]] | 204 | IDD_CHOOSETEXTEDITOR * [[Data Calculator|Data Calculator]] | 471 | IDD_DATA_CALCULATOR
    22 KB (2,627 words) - 22:23, 27 January 2020
  • SMS:ADCIRC Wind Coverage
    Data in the ATCF best track format for historical storms are available from vari ...tex model). Depending on the selected option for NWS, SMS will export the data as a file named fort.22 for the ADCIRC simulation in formats compatible wit
    9 KB (1,465 words) - 15:47, 28 April 2023
  • SMS:Release Notes SMS 11.2
    **8257 - Materials Data Loss *'''Spectral Data'''
    20 KB (2,895 words) - 23:45, 9 January 2023
  • SMS:ADCIRC Interface Changes for SMS 13.1
    SMS 13.0 ADCIRC projects are not supported in this version of SMS. Read the native ADCIRC input files to load this ADCIRC model(s). See https://www ...tes a new simulation (and possibly a mapped tidal component) and reads all data in the fort.14, fort.13, or fort.22 files in the same folder.
    5 KB (680 words) - 23:00, 17 March 2021
  • SMS:ADCIRC Tutorial
    ...f Long Island in New York. All files for this tutorial are found in ADCIRC Data Files directory. For this tutorial, you will first read in a coastline file, which has already been set up for you. This sample coa
    27 KB (4,422 words) - 22:34, 10 April 2013
  • SMS:PTM
    ...to PTM. If a simulation has already been created or an existing simulation read, the particle object will exist in the [[SMS:Project Explorer|Project Explo ...ge Coverage|PTM Gage Coverage]] &ndash; Used to view time series of output data computed by the PTM engine.
    9 KB (1,300 words) - 21:21, 27 April 2023
  • GMS:Stochastic Modeling
    ...es and anisotropy. Multiple realizations that are conditioned to borehole data provide modelers with a rational approach for dealing with uncertainty asso ...tions as "material sets" in the [[GMS:LPF Package|LPF package]] or as "HUF data" in the [[GMS:HUF Package|HUF package]]. (See [[GMS:T-PROGS|T-PROGS]])
    11 KB (1,592 words) - 15:13, 8 September 2017
  • SMS:TUFLOW FV Model Control
    **''Use ISODate'' &ndash; Option to use ISODate format which requires data be input in the form dd/mm/yyyy HH:MM:SS. If left off, default time format ...c values that the model produces. Small anomalies and acceptable spikes in data values will not stop computations.
    37 KB (5,684 words) - 17:18, 28 March 2023
  • SMS:Release Notes SMS 10.0
    # Fixed a problem with RMA2 Marsh Porosity where all of the data was not being saved #Fixed a crash with opening project files with plots that have incomplete data
    14 KB (2,218 words) - 23:45, 9 January 2023
  • GMS:Plot Wizard
    Plots are useful for many purposes, such as extracting data from two or three dimensional objects and model verification. Plots are cre :* Computed vs. Observed Data
    38 KB (6,273 words) - 20:01, 11 May 2023
  • WMS:Version History
    #Map Data #*''Extract Features'' tool that allows directly converting raster data to stream and ridge/embankment centerlines.
    47 KB (7,606 words) - 21:01, 26 May 2023
  • SMS:Generic Model
    ...ary conditions specified, and material properties applied to the geometric data and saved out to a generic file format. ...eady been created for a Generic Model simulation or an existing simulation read, the mesh object will exist in the [[SMS:Project Explorer|Project Explorer]
    5 KB (814 words) - 21:24, 2 May 2023
  • SMS:GenCade Graphical Interface
    ...s already been created for a GenCade simulation or an existing simulation read, the grid object will exist in the [[SMS:Project Explorer|Project Explorer] ...he attributes of this point include a time series of [[SMS:Wave Gages|wave data]].
    5 KB (785 words) - 15:13, 9 April 2019
  • SMS:FESWMS
    * [[SMS:Data Transform|Transform]] the mesh so it is close to the origin (0,0). Large x, # Import background data consisting of:
    8 KB (1,131 words) - 19:37, 22 February 2023
  • SMS:What's New in SMS 11.0
    ...can now work with raster data (DEM) in SMS without needing to convert the data into a scatterset (TIN). Raster formats are more space efficient and quicke ...ervation profile plots of raster data to see cross-section views of raster data.
    11 KB (1,736 words) - 21:14, 9 January 2023
  • GMS:Global Options/Basic Package
    ...et of flags defining which of the other packages are to be used. The input data for this package should be entered before editing any of the other packages ...and bottom layer elevations must be entered regardless of the which layer data package (BCF, LPF, HUF) is chosen even though these values may not be used
    11 KB (1,736 words) - 18:07, 11 January 2024
  • SMS:Grid Nesting
    ...al must be set so each snap will hit a WAM output time. For example if WAM data was being output every hour, the interval may be 1 hour, 2 hours, or 3 hour ...boundary. However, more nesting cells require more disk space and time to read and write the files.
    5 KB (876 words) - 22:12, 9 July 2018
  • User/Jcreer/Changes Online Maps and Import from Web
    ...m a variety of different sources. Once online maps has been selected, the data resolution will be automatically adjusted based on the zoom parameters. On ...es are on external servers that the XMS software has no control over. The data may draw/export very slowly or become unavailable at any time. The XMS sof
    33 KB (5,374 words) - 18:42, 23 March 2023
  • WMS:WMS Dialog Help
    * [[WMS:File Menu#Edit File|View Data File]] | 204 | IDD_CHOOSETEXTEDITOR * [[Data Calculator|Data Calculator]] | 471 | IDD_DATA_CALCULATOR
    24 KB (2,949 words) - 22:22, 27 January 2020
  • SMS:AdH Model Control
    ...Run Model|running ADH]], set and review model control parameters. Entered data will be used to write the files employed in the ADH model run. * ''Model Control Output'' &ndash; Set parameters for how often solution data will be written.
    15 KB (2,372 words) - 19:56, 11 September 2023
  • GMS:MF6 CNC Package
    ...xiliary variables that can be provided, but subsequent blocks will require data for each of the auxiliary variables that are defined. Turning this on will ...ormation input will be printed to the listing file immediately after it is read.
    6 KB (973 words) - 20:38, 15 March 2022
  • WMS:WMS 11.0 Dialog Help
    * [[WMS:File Menu#Edit File|View Data File]] | 204 | IDD_CHOOSETEXTEDITOR * [[Data Calculator|Data Calculator]] | 471 | IDD_DATA_CALCULATOR
    25 KB (3,064 words) - 22:24, 27 January 2020
  • WMS:WMS 11.1 Dialog Help
    * [[WMS:File Menu#Edit File|View Data File]] | 204 | IDD_CHOOSETEXTEDITOR * [[Data Calculator|Data Calculator]] | 471 | IDD_DATA_CALCULATOR
    25 KB (3,075 words) - 19:58, 1 September 2022
  • WMS:WMS 11.2 Dialog Help
    * [[WMS:File Menu#Edit File|View Data File]] | 204 | IDD_CHOOSETEXTEDITOR * [[Data Calculator|Data Calculator]] | 471 | IDD_DATA_CALCULATOR
    25 KB (3,079 words) - 18:13, 16 May 2023
  • WMS:Drainage Module Menus
    ; Compute Basin Data : Computes basin attributes such as basin areas and slopes or stream length ; Drainage Data &rarr; Feature Objects :
    14 KB (2,293 words) - 22:25, 5 May 2020
  • SMS:CMS-Flow Model Control 11.2
    ===Wind Data=== **Import from File...: Button allowing the user to import wind data from a file. The file must be in an "m2w" wind format.
    14 KB (2,115 words) - 15:35, 13 October 2017
  • WMS:Routing HEC-1 Cards
    ==''HEC-1 Routing Data'' Dialog== ...ns are generated automatically when writing a HEC-1 file. However, routing data must be entered in order to simulate the movement of a flood wave through t
    22 KB (3,367 words) - 22:44, 13 July 2020
  • WMS:WMS 99.99 Dialog Help
    * [[WMS:File Menu#Edit File|View Data File]] | 204 | IDD_CHOOSETEXTEDITOR * [[Data Calculator|Data Calculator]] | 471 | IDD_DATA_CALCULATOR
    26 KB (3,205 words) - 18:12, 16 May 2023
  • GMS:Variogram Editor
    ...he unit lag separation distance; the tolerance can be smaller to allow for data on a pseudo-regular grid. A pair will be included in multiple lags if the t ...the semivariogram computed using equation 9.38 by the squared mean of the data values in each lag:
    15 KB (2,371 words) - 19:35, 24 February 2023
  • WMS:Basin HEC-1 Cards
    ==''HEC-1 Basin Data'' Dialog== ...ing ''HEC-1'' | '''Edit Parameters...''' in WMS and then choosing '''Basin Data...''' from the ''Edit HEC-1 Parameters'' dialog.
    23 KB (3,573 words) - 16:06, 14 July 2020
  • WMS:January2009Webinar
    '''How can we use gridded radar precipitation data?''' ...or81_Vol_VI.pdf WMS Tutorials: Volume 6, Chapter 4 - Using NEXRAD Rainfall Data in GSSHA]
    16 KB (2,559 words) - 19:37, 23 March 2020
  • GMS:MF6 SRC Package
    ...xiliary variables that can be provided, but subsequent blocks will require data for each of the auxiliary variables that are defined. Turning this on will ...ormation input will be printed to the listing file immediately after it is read.
    7 KB (1,170 words) - 21:16, 15 March 2022
  • GMS:T-PROGS
    |model_type= transition probability geostatistics on borehole data ...itions between the boreholes following the trends observed in the borehole data. These material sets can be used for [[GMS:Stochastic Modeling#Stochastic
    20 KB (3,125 words) - 17:17, 29 May 2020
  • GMS:MF6 DISV Package
    ** ''Define'' &ndash; This allows data within the ''GRIDDATA'' section to be defined. When this is inactive, all o ...ll does not exist in the simulation. Input and output values will still be read and written for it, but internal to the program, it is excluded from the so
    8 KB (1,267 words) - 20:42, 15 March 2022
  • SMS:PTM Control File
    The PCF file is read until the instruction : |Gives the internal data structure path in the XMDF format flow file. The default is 'Datasets/Water
    24 KB (3,923 words) - 19:22, 4 February 2014
  • GMS:MF6 CSUB Package
    **''DATA'' &ndash; Turn on to make the ''DATA'' section visible. This section is on by default. ...of CSUB input will be printed to the listing file immediately after it is read.
    17 KB (2,662 words) - 20:38, 15 March 2022
  • SMS:SRH-2D Errors
    | Time series data used to define inflows/outflows, time varying water surface elevations, or ...ue per defined time. Review the ''XY Series Editor'' where the time series data is defined for the boundary conditions and remove any duplicate time entrie
    25 KB (4,119 words) - 23:15, 22 February 2024
  • SMS:TUFLOW Coverages
    ...arcs, and polygons. Unlike some models used in SMS, TUFLOW uses coverage data as model inputs. ...ltiple simulations or geometry components to share coverage data. Sharing data between simulations reduces required disk space for the simulation and make
    21 KB (3,419 words) - 16:59, 23 September 2019
  • SMS:ADCIRC Model Control 13.0
    ...Constant" is selected. Constant Coriolis coefficient. This value is always read in, but is only used in the computations when "NCOR = 0". ...'Start'' (TOUTSGE) &ndash; The number of days after which global elevation data is recorded to the "fort.63" file.
    159 KB (22,570 words) - 18:42, 5 April 2021
  • SMS:BOUSS-2D
    * Data Visualization ...oefficient and width and reflection]]In the absence of laboratory or field data to calibrate damping and porous layers for an application, consider multipl
    11 KB (1,563 words) - 19:20, 2 May 2023
  • SMS:ADCIRC Model Control
    ...Constant" is selected. Constant Coriolis coefficient. This value is always read in, but is only used in the computations when "NCOR = 0". *''Start (days)'' &ndash; The number of simulation days after which data is recorded the output files.
    155 KB (21,982 words) - 19:50, 17 March 2021
  • SMS:CGWAVE
    * Data Visualization ...has already been created for a CGWAVE simulation or an existing simulation read, the mesh object will exist in the [[SMS:Project Explorer|Project Explorer]
    22 KB (3,392 words) - 22:20, 25 April 2023
  • SMS:SRH-2D
    * Data Visualization ...(Manning's n value), coordinate system corresponding to the data, and flow data.
    28 KB (4,242 words) - 22:07, 1 May 2023
  • SMS:BOUSS-2D Graphical Interface
    ...s the status messages. When the run is complete, the spatial solutions are read in for analysis and visualization. * '''Calculate Min Period''' &ndash; Opens a data selection window where a dataset can be specified.
    14 KB (2,143 words) - 20:46, 19 July 2019
  • GMS:FEMWATER Model Input
    The ''FEMWATER Time Control'' dialog is used to enter the data used by FEMWATER to compute the computational time intervals. It is also us ...ution files should be specified, since they take up less memory and can be read more quickly by GMS.
    10 KB (1,604 words) - 16:02, 17 August 2017
  • SMS:Version History
    *****2D Data from 3D Data **** Support for download of [https://www.usgs.gov/3d-elevation-program 3DEP data].
    79 KB (12,273 words) - 21:15, 3 October 2023
  • License Agreement
    "Licensed patents" are a contributor's patent claims that read directly on its contribution. A "library" means a collection of software functions and/or data
    102 KB (16,180 words) - 19:23, 2 November 2017
  • SMS:Dynamic Model Interface Schema
    ...n the left side of the dialog and contains groups and items that represent data. Clicking on a group or item will result in the widget view being updated t | example = Column1 is read only, Column 2 isn't read only and is also optional.<br/> This means the column can have empty fields
    163 KB (21,788 words) - 16:04, 4 March 2019
  • GMS:Release Notes GMS
    *14994 DRT Data Can't Be Added to USG, Even Though USG Does Support DRT Now *15049 DRN package Map from Coverage gives bad CELL2D data
    67 KB (9,729 words) - 17:28, 27 March 2024
  • SMS:SRH-2D Files
    |XYS||Input files for XY Series of data including: ...culvert is part of the simulation, then this file is generated. It reports data columns of computed flow rates, headwater, and tailwater throughout the sim
    21 KB (2,926 words) - 23:28, 11 January 2024
  • GMS:Older Release Notes GMS
    *08462 - MODLOW HUF Data Visualization **8417 - GMS Transient Obs. Head data not importing
    69 KB (10,607 words) - 23:45, 9 January 2023
  • SMS:2D Mesh Files *.2dm
    ...a nodestring may extend multiple NS cards. Each sequential line should be read until the negative tail node ID is found, ending the nodestring definition. |Colspan="4"|'''''Note:''''' TD data is written as an integer when possible or written as a real number if decim
    45 KB (6,007 words) - 16:00, 26 September 2017
  • SMS:Release Notes SMS
    *15034 GUI Test: Spectral data appears at a weird time after opening DWS file *14703 GUI Test: Data to Select changes when it shouldn't when selecting a CGrid
    133 KB (18,887 words) - 19:58, 27 March 2024
  • WMS:Release Notes WMS
    *14968 NEXRAD Data is Taking Unreasonably Long to Import '''Hydrologic Data'''
    160 KB (20,896 words) - 17:17, 27 March 2024
Retrieved from "https://www.xmswiki.com/wiki/Special:Search"