Search results

From XMS Wiki
Jump to navigationJump to search

Page title matches

Page text matches

  • SMS:TUFLOW 2D Geometry Modification Coverage Properties Dialog
    ...ified in the coverage properties dialog apply to any geometry modification arcs and polygons within the coverage. If you want to use multiple settings with # All Zpts (default) - The z values from all of the arcs/polygons are used.
    1 KB (212 words) - 17:17, 5 May 2008
  • SMS:BOUSS2D Right-Click Menu
    ...The arcs must be straight lines, because bouss only supports straight line arcs.
    375 bytes (56 words) - 16:11, 28 March 2013
  • GMS:Clean Command
    ...a node is created at the intersection and the arcs are split into smaller arcs. ...' – This option is the same as the previous option but only selected arcs are checked for intersections.
    1 KB (231 words) - 20:40, 7 February 2024
  • WMS:Define Flood Inundation Polygon
    ...undation boundary. Normally, use the roadway as one of the arcs and build arcs for the rest of the inundation boundary. Select flood inundation polygon – This button allows selecting arcs that represent the flood inundation boundary.
    2 KB (233 words) - 19:31, 4 May 2020
  • SMS:Align Arc with Contour
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 15:55, 3 June 2013
  • SMS:Arc Attributes Dialog
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 15:56, 3 June 2013
  • SMS:Align Arcs with Contour
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 16:04, 3 June 2013
  • SMS:Filter Arc
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 15:08, 3 June 2013
  • SMS:Filter Arcs
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 15:09, 3 June 2013
  • SMS:Filter Arc Segments
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 15:09, 3 June 2013
  • SMS:Split Feature Arcs
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 15:10, 3 June 2013
  • SMS:Arc Redistribution options
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 16:44, 1 October 2013
  • SMS:Offset Arc
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 15:10, 3 June 2013
  • SMS:Offset Arcs
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 15:10, 3 June 2013
  • SMS:Create Arc Group
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 15:54, 3 June 2013
  • SMS:Create Contour Arcs
    #REDIRECT [[SMS:Arcs]]
    22 bytes (3 words) - 15:55, 3 June 2013
  • WMS:Define and Smooth Streams
    ...elevation + the channel depth elevation entered in the [[WMS:GSSHA Feature Arcs|''GSSHA Feature Arc Type'' dialog]]). ...or more stream arcs and edit the attributes or smooth the selected stream arcs.
    2 KB (348 words) - 19:55, 4 May 2020
  • IDD CGRID ARC OPTS
    #redirect [[SMS:Arcs#Arc_Attributes_Dialog]]
    44 bytes (6 words) - 17:02, 22 September 2016
  • SMS:Source Arc
    #redirect [[SMS:Arcs#Source_Arc]]
    33 bytes (5 words) - 17:05, 23 January 2018
  • SMS:Recompute All Stations
    #redirect [[SMS:Arcs#Recompute_All_Stations]]
    45 bytes (6 words) - 18:20, 13 July 2016
  • SMS:Source/Target Arc Redistribution
    #redirect [[SMS:Arcs#Source_Arc]]
    33 bytes (5 words) - 16:21, 24 January 2018
  • SMS:Source Arc Redistribution
    #redirect [[SMS:Arcs#Source_Arc]]
    33 bytes (5 words) - 16:21, 24 January 2018
  • SMS:Redistribute Vertices
    #redirect [[SMS:Arcs#Redistribute_Vertices]]
    44 bytes (5 words) - 15:20, 8 September 2015
  • SMS:Source Arc Vertices Redistribution
    #redirect [[SMS:Arcs#Source_Arc]]
    33 bytes (5 words) - 16:21, 24 January 2018
  • QDlgCreateContourArcs
    #redirect [[SMS:Arcs#Create_Contour_Arcs]]
    42 bytes (6 words) - 21:08, 4 September 2015
  • SMS:Redistribute Vertices Dialog
    #redirect [[SMS:Arcs#Redistribute_Vertices]]
    44 bytes (5 words) - 15:37, 8 September 2015
  • WMS:Travel Times from Map Data
    ...pe (providing there is a background TIN or DEM) are easily determined from arcs, the time computation coverage provides a simple and powerful method for co ...de→Flow Arcs''']] and [[WMS:Time Computation Arcs|'''Stream→Flow Arcs''']] commands.
    2 KB (306 words) - 16:06, 7 December 2016
  • WMS:GSSHA Generic Arc
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:24, 3 September 2013
  • WMS:GSSHA Pipe Arc
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:24, 3 September 2013
  • WMS:GSSHA Pipe Arcs
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:24, 3 September 2013
  • WMS:GSSHA Embankment Arc
    #REDIRECT [[WMS:GSSHA Embankment Arcs]]
    39 bytes (5 words) - 18:46, 3 September 2013
  • WMS:GSSHA Sub-surface Losses/Gains
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:42, 3 September 2013
  • WMS:Embankment Arcs
    #REDIRECT [[WMS:GSSHA Embankment Arcs]]
    39 bytes (5 words) - 18:46, 3 September 2013
  • WMS:GSSHA Sub-surface Losses
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:42, 3 September 2013
  • WMS:GSSHA Generic Arcs
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:24, 3 September 2013
  • WMS:GSSHA Sub-surface Gains
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:42, 3 September 2013
  • WMS:GSSHA General Stream Arcs
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:24, 3 September 2013
  • WMS:GSSHA Arc Groundwater BC
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:45, 3 September 2013
  • WMS:GSSHA General Stream Arc
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:24, 3 September 2013
  • WMS:GSSHA Feature Arc
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:12, 3 September 2013
  • WMS:GSSHA Trapezoidal Channel Arc
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:24, 3 September 2013
  • WMS:GSSHA Feature Arcs Properties
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:12, 3 September 2013
  • WMS:GSSHA Trapezoidal Channel Arcs
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:24, 3 September 2013
  • WMS:GSSHA Arc Properties
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:12, 3 September 2013
  • WMS:GSSHA Cross Section Channel Arcs
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:24, 3 September 2013
  • WMS:GSSHA Arc Types
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:12, 3 September 2013
  • WMS:GSSHA Cross Section Channel Arc
    #REDIRECT [[WMS:GSSHA Feature Arcs]]
    36 bytes (5 words) - 20:24, 3 September 2013
  • SMS:Arc
    #redirect [[SMS:Feature Objects Types#Arcs]]
    44 bytes (6 words) - 17:21, 7 August 2015
  • SMS:Feature Arcs
    #redirect [[SMS:Feature Objects Types#Arcs]]
    44 bytes (6 words) - 17:21, 7 August 2015
  • SMS:Feature Arc
    #redirect [[SMS:Feature Objects Types#Arcs]]
    44 bytes (6 words) - 17:21, 7 August 2015
  • WMS:Define Culvert Roadway Data
    ...Roadway Data step is used to define the culvert and roadway centerlines as arcs and the data associated with these structures. ...xist for roadway arcs, upstream arcs, downstream (tailwater) arcs, culvert arcs and flood inundation polygons.
    2 KB (348 words) - 15:15, 20 October 2017
  • WMS:Stream offset
    #REDIRECT [[WMS:GSSHA Embankment Arcs#Stream Offset]]
    53 bytes (7 words) - 19:35, 22 May 2019
  • WMS:Stream offset Dialog
    #REDIRECT [[WMS:GSSHA Embankment Arcs#Stream Offset]]
    53 bytes (7 words) - 19:34, 22 May 2019
  • Arcs from UGrid Points Tool
    {{Arcs from UGrid Points}}
    76 bytes (9 words) - 22:51, 14 May 2024
  • Reorient Stream Arcs Tool
    {{Reorient Stream Arcs Tool}}
    79 bytes (9 words) - 18:25, 29 March 2024
  • WMS:Setup Tailwater Channel
    ...nterline arcs in the HY8 coverage. When creating the tailwater centerline arcs, start at the downstream end of the culvert crossing arc and create an arc ...Y8 coverage and brings up the arc attributes for these arcs. If tailwater arcs are selected, only the selected tailwater arc attributes are shown. These
    2 KB (300 words) - 15:23, 20 October 2017
  • GMS:Exporting Pathlines
    ==Capture Zones to Arcs== ...ill convert the capture zone outline to [[GMS:Feature_Objects#Arcs|feature arcs]], creating a separate [[GMS:Feature_Objects#Coverages|coverage]] for each
    2 KB (361 words) - 15:31, 29 November 2017
  • Arcs to Polygons Tool
    {{Arcs to Polygons}}
    66 bytes (9 words) - 21:31, 1 May 2024
  • WMS:Embankment Arcs Profile Editor Dialog
    #REDIRECT [[WMS:GSSHA Embankment Arcs#Embankment Arc Profile Editor Dialog]]
    76 bytes (10 words) - 23:48, 17 April 2019
  • WMS:Embankment Arcs Profile Editor
    #REDIRECT [[WMS:GSSHA Embankment Arcs#Embankment Arc Profile Editor Dialog]]
    76 bytes (10 words) - 23:48, 17 April 2019
  • WMS:Embankment Arcs Profile
    #REDIRECT [[WMS:GSSHA Embankment Arcs#Embankment Arc Profile Editor Dialog]]
    76 bytes (10 words) - 23:47, 17 April 2019
  • WMS:Define Upstream Channel
    ...step in which the tailwater channel was defined. When an arc is defined (arcs must be created from upstream to downstream) from this step in the wizard, Define upstream centerline – This button allows creating arcs that represent the upstream centerline.
    1 KB (157 words) - 19:52, 4 May 2020
  • WMS:DEM to Stream Arcs
    ...reshold entered. Consecutive stream DEM points are then joined together as arcs with nodes created at junction points where the stream splits. ...s→Feature Arcs''' command can also be very useful for defining stream arcs which are later used for creating a TIN surface.
    2 KB (313 words) - 23:28, 16 December 2019
  • SMS:TUFLOW Combining 1D and 2D Domains
    ...1D Flow/2D Water Level Connection (HX) or Flow source from a 1D model (SX) arcs define the interface between the 1D and 2D domains. ...1 connection arc is needed where the 1D Flow/2D Water Level arcs require 2 arcs (one to each end of the arc).
    2 KB (343 words) - 15:54, 9 October 2017
  • WMS:Quick Tour -Travel Time Computation
    ...s) used to define different equations. The sum of the travel times for the arcs within the basin is then used for time of concentration or lag time.
    684 bytes (108 words) - 15:58, 11 April 2017
  • WMS:Combining Arc Travel Times
    ...sin time of concentration (or lag time) is to sum the travel times of all arcs within a basin or between outlets. This is done by selecting the basin or o ...[[WMS:Time Computation#Assigning Equation to Arcs|''Assigning Equation to Arcs'']] dialog where time computation types and methods can be selected. This d
    3 KB (489 words) - 16:43, 2 October 2017
  • SMS:Coastline Files *.cst
    ...SMS:Coverages|coverages]]. When a Coastline file is read into SMS, feature arcs are created. If a coastline closes, the final point is not repeated. If no
    2 KB (230 words) - 16:05, 26 September 2017
  • SMS:Feature Object Modification: All
    ...lean.jpg|thumb|300 px|Figure C: (A) snapping (B) intersecting (C) dangling arcs]] * ''Intersect arcs'' – Places a node where two arcs intersect. All intersections are fixed with this command (see Figure B).
    2 KB (352 words) - 20:39, 7 February 2024
  • WMS:GSSHA Streamflow Workflow
    :#Create the stream arcs. :#Set the stream arcs to a [[WMS:GSSHA Feature Arcs|GSSHA stream arc]] type.
    2 KB (264 words) - 20:08, 3 May 2023
  • SMS:Patch
    ...directional coons patching method is used to interpolate from the boundary arcs to interior nodes. Typical applications of this method include river channe ...es is shown below. Note that Side 1 and Side 2 are both made from multiple arcs. Hollow squares represent the beginning and ending points of an arc ([[SMS:
    3 KB (519 words) - 19:17, 8 April 2020
  • SMS:Extract Cross Section
    The '''Extract Cross Sections''' command uses the cross section arcs and a digital terrain model (TINs are the only source that can currently b Cross sections for individual arcs may be extracted by selecting the arc(s) before choosing the '''Extract Cro
    2 KB (245 words) - 16:45, 29 December 2015
  • GMS:MODAEM Commands
    ; Pathlines → Arcs : This command will create a new coverage. ; Contours → Arcs : This command will create a new coverage.
    743 bytes (100 words) - 18:18, 22 August 2016
  • Polygons from Arcs Tool
    {{Polygons from Arcs}}
    106 bytes (12 words) - 16:37, 3 May 2024
  • SMS:Map Feature Objects Menu
    ...g the ''DELETE'' key. Deleting an arc group does not delete the underlying arcs. ...ate the arcs forming the boundary of the polygon. After forming loops with arcs, choose ''Feature Objects'' | '''Build Polygons''' from the menu. The build
    6 KB (976 words) - 16:35, 17 March 2022
  • WMS:Feature Objects
    ...er Geographic Information Systems (GIS) objects and include points, nodes, arcs, and polygons. Feature objects can be grouped together into coverages, each ...supports vector data. The basic object types are points, nodes, vertices, arcs, and polygons. The relationship between these objects is illustrated in the
    5 KB (734 words) - 15:36, 28 September 2017
  • SMS:Map Module Selection
    ; Length : Opens a dialog that asks to specify a range. All arcs whose length lies inside that range are selected. This enables all entities ...W_Coverages#Boundary_Conditions_Coverage|TUFLOW]], etc.). Allows selecting arcs by assigned boundary condition type.
    4 KB (660 words) - 14:33, 17 September 2019
  • GMS:MODPATH Commands
    ...ne → Arcs : This command converts the capture zone outline to feature arcs. To learn more, see [[GMS:Exporting Pathlines|Exporting Pathlines]]. ...es → Arcs : Converts the all pathlines in the capture zone to feature arcs. For more information, see [[GMS:Exporting Pathlines|Exporting Pathlines]].
    2 KB (259 words) - 20:43, 1 April 2022
  • SMS:Build Polygons
    ...defined by arcs, the first step in constructing a polygon is to create the arcs forming the boundary of the polygon. All closed loops will be formed into p ...cannot be selected with the '''Select Polygon''' tool, check to see if the arcs in the polygon are making a closed loop by removing any gaps, then use the
    1 KB (241 words) - 18:33, 15 July 2016
  • SMS:Digitize
    ...Create Feature Arc''' [[File:SMS Create Arc Tool.svg|16 px]] tool to make arcs. Click once to start an arc. Single click along the arc to create vertices. ...will start the new arc on the existing node. Nodes can belong to multiple arcs.
    4 KB (642 words) - 14:57, 26 June 2017
  • WMS:Extract Cross Sections
    ...oss Sections''' command in the ''River Tools'' menu uses the cross section arcs and a digital terrain model (TINs are the only source that can currently be Cross sections for individual arcs may be extracted by selecting the arc(s) before choosing the '''Extract Cro
    2 KB (292 words) - 16:57, 13 June 2018
  • SMS:Feature Objects Types
    ...r Geographic Information Systems (GIS) objects and include points, nodes, arcs, and polygons. Feature objects can be grouped together into [[SMS:Coverage ...parameters such as flow and head values can also be assigned to points or arcs. Depending on the numerical model to be used, SMS either passes this concep
    6 KB (942 words) - 16:26, 19 September 2017
  • WMS:MODRAT Tc Coverage Type
    Use this type of coverage to define time of concentration arcs for a MODRAT simulation. ...''' from the ''Feature Objects'' menu, or double-click on the arc. Feature arcs created in the Modrat Tc coverage can have the following conveyance types.
    2 KB (252 words) - 14:56, 17 May 2017
  • WMS:Drainage
    ...and assigned the drainage coverage type. When starting to creating points, arcs, and polygons, by default they will belong to this drainage coverage. Most ...logic model directly from feature objects, or GIS vector data. The points, arcs, and polygons in the drainage coverage are tied directly to the hydrologic
    7 KB (1,099 words) - 15:31, 29 September 2017
  • WMS:MODRAT (Q&A)
    ...arameters and the other is based on tc arcs. The MODRAT Tc wizard uses tc arcs. There is a regression equation that requires some input parameters like l
    1,005 bytes (178 words) - 16:12, 11 December 2017
  • GMS:Feature Object Commands
    ; {{Anchor|Build Poyglons}} Build Polygons : Creates polygons out of closed arcs. ...oup : Creates the select multiple arcs as one. All arcs are still separate arcs, but one group.
    4 KB (673 words) - 19:25, 5 January 2024
  • SMS:CMS-Flow Coverages 11.2
    ...ain (origin, orientation and extents) and optional feature points, feature arcs and feature polygons. ...hen multiple arcs are used in a CMS-Flow coverage, it is possible for two arcs to classify a cell differently (the cell may be on the land side of one arc
    4 KB (605 words) - 15:40, 13 October 2017
  • SMS:Feature Object Commands
    ...ne arcs. The ocean arc starts and ends at the extreme ends of the chain of arcs. ...more information, see [[SMS:Arcs#Create Contour Arcs|Arcs: Create Contour Arcs]]. This command is available if the current [[SMS:Coverages|coverage]] type
    4 KB (617 words) - 15:12, 11 October 2017
  • SMS:GenCade Arc Attributes
    ...s that can be associated with for [[SMS:Feature Objects Types#Arcs|feature arcs]] in a GenCade coverage are specified through the ''GenCade Arc Attributes' ...nd defines dredging events that occur during the simulation. Several other arcs can define other components of the inlet.
    3 KB (418 words) - 16:57, 10 July 2019
  • WMS:Map Tools
    ...is a generic selection tool that can be used to select any feature object (arcs, polygons, points, etc.) without having to change the tool. This tool can b ...Feature Arc''' [[File:WMS SelectArcTool.svg|16 px]] tool is used to select arcs for operations such as deletion, redistribution of vertices, or building po
    5 KB (846 words) - 20:45, 17 December 2019
  • SMS:Scatter Project Explorer Items
    ...sh; The outer boundary of the scatter set is converted to Map module arcs. Arcs are created where scatter triangles do not border another triangle. ...– Existing breaklines in the scatter set is converted to Map module arcs.
    4 KB (547 words) - 20:57, 21 March 2022
  • SMS:Generic Model Coverage
    ..., a dialog will appear to assign node or element boundary conditions. For arcs, the process is similar to nodes but the attributes will be assigned on the
    2 KB (281 words) - 16:14, 17 November 2017
  • SMS:Importing Shapefiles
    ...a simple display list and does not try to "build" topology by connecting arcs at nodes and eliminating shared edges of polygons as required when creatin ...p nodes within a certain distance, intersect arcs, and eliminate dangling arcs.
    3 KB (416 words) - 19:22, 24 August 2017
  • WMS:River Tools
    ...interpolated (copied since it will be the same value) along cross section arcs, or along a centerline. ...ge, this command recomputes the length and stationing along any centerline arcs. In the 1D Hydraulic Cross Section coverage, this command recomputes the cr
    5 KB (810 words) - 22:55, 4 May 2020
  • GMS:UGrid Module
    ...efinement attribute and refinement size. The cells surrounding the points, arcs, and polygons are also refined to smooth change from coarse cells to refine ...d to honor all arc geometry. If refinement is specified as an attribute on arcs or polygons it is ignored.
    2 KB (325 words) - 22:20, 10 February 2022
  • GMS:Viewing Computed Fluxes
    ==Summation of Fluxes on Arcs and Polygons==
    2 KB (301 words) - 16:19, 25 August 2017
  • WMS:Convert TINs
    ...e elevation of the contour is stored in this attribute. When exporting the arcs as a shapefile the elevation attribute field will be saved automatically.
    2 KB (362 words) - 23:02, 30 December 2019
  • WMS:Feature Objects Menu
    ...are the polygons. Other coverages, like cross sections or time computation arcs only have attributes for the lines. When selecting the '''Attributes''' com ...o arcs attached to the node are merged into a single arc (if more than two arcs are attached to a node it cannot be converted to a vertex).
    10 KB (1,698 words) - 21:18, 17 December 2019
  • WMS:Overview of Map Data Equations
    * [[WMS:Time Computation#Assigning Equation to Arcs|Assigning Equation to Arcs]]
    1 KB (199 words) - 15:36, 7 December 2016
  • GMS:What's New in GMS 8.2
    ....3E_Arcs|Pathlines]] to Arcs command converts MODPATH pathlines to feature arcs
    1 KB (217 words) - 14:26, 12 September 2016
  • SMS:Quick Tour - Feature Objects
    ...models are constructed using feature objects. Feature objects are points, arcs, and polygons. Feature objects can be created entirely within SMS or impor
    515 bytes (73 words) - 18:44, 10 April 2017
  • GMS:Feature Objects
    ...er Geographic Information Systems (GIS) objects and include points, nodes, arcs, and polygons. Feature objects can be grouped together into coverages, each ...l, items such as rivers, drains, wells, lakes are represented with points, arcs, and polygons. Attributes such as conductance, pumping rates, and elevation
    10 KB (1,739 words) - 17:44, 15 June 2022
  • Coverages Tools
    {{Polygons from Arcs}}
    471 bytes (58 words) - 19:51, 25 October 2023
  • WMS:Time Computation
    The Time Computation coverage type allows users to define equations along arcs for computing flow path travel times within a basin. In this way times of c ...define them from “downstream” to “upstream” in the same way that drainage arcs are defined.
    13 KB (2,122 words) - 21:44, 14 October 2022
  • WMS:GSSHA Channel Routing
    ...e underlying grid cells. In order to define GSSHA channel parameters using arcs, the current coverage type must be set to "GSSHA". GSSHA is a two-dimension The '''Smooth Stream Arcs''' command is used to adjust the elevation of the stream bed for GSSHA:
    4 KB (533 words) - 16:50, 1 May 2019
  • WMS:Converting DEMs
    ...lude using a [[WMS:Creating TINs|bounding polygon]] and interior breakline arcs (i.e. streams and/or ridges), or filtering out less important elevation poi ...e elevation of the contour is stored in this attribute. When exporting the arcs as a shapefile the elevation attribute field will be saved automatically.
    3 KB (450 words) - 22:42, 17 December 2019
  • GMS:Converting 2D Grids
    ...→ Arcs : Creates a new feature [[GMS:Coverages|coverage]] containing arcs derived from the linear contours on the 2D grid. The command only works if
    2 KB (274 words) - 15:31, 24 October 2017
  • SMS:TUFLOW Linking 2D Domains
    ...spacing on the arcs that join multiple 2D domains. The spacing along these arcs determines how flows move between the domains. The rule of thumb to start w
    2 KB (274 words) - 19:06, 8 March 2018
  • SMS:Scatter Data Menu
    ...s. For more information, see [[SMS:Arcs#Create Contour Arcs|Create Contour Arcs]]. ...' : The outer boundary of the scatter set is converted to Map module arcs. Arcs are created where scatter triangles do not border another triangle.
    5 KB (765 words) - 15:47, 24 April 2020
  • SMS:Visualization for 3D Solutions
    ...s without any vertices. This defines where the fences will be located. The arcs cannot have vertices since only planar surfaces can be represented.
    1 KB (246 words) - 16:37, 26 January 2016
  • SMS:Map Project Explorer
    ...g each arc. If no arcs are selected when this command is invoked, all the arcs in the selected coverage are forced into the mesh. This operation requires ...s mesh nodes to match arc nodes and vertices. Brings up the ''Snap Mesh to Arcs'' dialog. Note that elevation values must be re-interpolated to the mesh af
    4 KB (708 words) - 19:13, 31 August 2020
  • SMS:1D Module
    ...D-Hydraulic Centerline coverage including the centerline and optional bank arcs. # Creating the cross section arcs at important/required locations along the section of river being modeled.
    3 KB (483 words) - 22:16, 24 March 2022
  • WMS:General Coverage
    ...and attributes. For examples WMS requires that stream and time computation arcs be defined from downstream to upstream, with the general coverage the direc
    2 KB (270 words) - 15:33, 29 September 2017
  • SMS:Observation Profile Plot
    ...e or more scalar datasets associated with a mesh or grid along observation arcs in the [[SMS:Observation Coverage|Observation coverage]]. Profile plots are ...ot may contain multiple plots for multiple locations. However, locations (arcs or lines) defined in separate observations coverages cannot be combined int
    7 KB (1,199 words) - 20:39, 18 April 2022
  • GMS:Feature Object Tool Palette
    ...on tool that selects existing feature objects, including: nodes, vertices, arcs, and polygons. A selected object can be deleted, moved to a new location, o ...lect Vertex}} || Selection tool that will only select existing vertices on arcs. Once selected, a vertex can be deleted, moved to a new location, or operat
    6 KB (948 words) - 20:51, 18 July 2022
  • WMS:GSSHA Storm Drain
    {{TOC right}}The "GSSHA Storm Drain" coverage in WMS is used to hold feature arcs, nodes, and polygons related to subsurface drainage networks or agricultura ...be imported, edited, and run in GSSHA from the WMS interface. The generic arcs that were pipes and were left in the "GSSHA" coverage can be deleted if des
    4 KB (566 words) - 21:47, 21 May 2019
  • SMS:Bridge Scour Methodology
    ...approach and contracted section. It will also intersect the abutment toe arcs with the contracted arc to determine the stationing of the abutment toes. ...water surface elevations, and velocities along the approach and contracted arcs. It then analyzes this data to determine the hydraulic parameters for the
    5 KB (880 words) - 17:10, 17 January 2023
  • WMS:Conceptual Model
    ...cFromStormDrainConceptualModel.jpg|thumb|right|A SWMM hydraulic model with arcs representing links and nodes in a SWMM model and the symbols corresponding ...model using [[WMS:Feature Objects|feature objects]] such as points, nodes, arcs, and polygons. A conceptual model is built in the Map module. In many cases
    2 KB (262 words) - 20:32, 20 December 2019
  • WMS:Pipe and Node Parameters
    ...d for building and editing the pipes and nodes associated with superlinks (arcs) and superjunctions (nodes) when running a GSSHA storm and tile drain simul ...(two nodes) between superjunctions. In WMS, superlinks are represented as arcs and superjunctions are represented by the two nodes at the end of each arc.
    7 KB (1,189 words) - 23:12, 17 May 2019
  • SMS:TABS Attribute Dialog
    TABS models have attribute dialogs for both points and arcs. ...alog is used to set the attributes for [[SMS:Feature Objects Types|feature arcs]]. Attributes that can be specified for each feature arc include:
    2 KB (248 words) - 16:36, 11 May 2020
  • WMS:Interpolating Hydraulic Model Results
    ...arcs (centerline or cross sections) or at a specified distance along the arcs.
    2 KB (283 words) - 20:49, 28 November 2022
  • WMS:GSSHA Feature Arcs
    ...ied, depending on the type of feature arc. There are five types of feature arcs in GSSHA for standard GSSHA coverages: ...''Properties'' dialog is where the attributes are associated with feature arcs.|}}
    15 KB (2,242 words) - 21:51, 7 July 2020
  • SMS:2D Mesh Options Dialog
    ...ributes vertices along the feature arcs defining meshing polygons. Feature arcs are only redistributed when using the [[SMS:Paving#Scalar Paving Density|sc
    2 KB (297 words) - 14:06, 12 June 2019
  • GMS:Feature Object Display Options
    ...They are edited using the fields on the right side of the dialog in the ''Arcs'' column. ...of the vertices. The color of the vertices is the same as the color of the arcs.
    7 KB (1,092 words) - 19:32, 26 April 2022
  • SMS:BOUSS Runup / Overtopping Input Files
    .... This file defines the porosity values along the 1-d grid. If no porosity arcs are defined, the model uses a default value of 1.0 along the entire grid. ...rc. This file defines the damping values along the 1-d grid. If no damping arcs are defined, the model uses a default value of 0.0 along the entire grid.
    2 KB (268 words) - 14:34, 7 September 2016
  • SMS:Floodway Delineation
    ...''Floodway'' tool in SMS is used to delineate approximate floodway extent arcs based on the geometry of the mesh, scatter set, or Cartesian grid used in t [[File:Flow trace example for Floodway.png|thumb|right|The smoother arcs were created using the smoothing options.]]
    6 KB (1,021 words) - 20:49, 17 August 2022
  • GMS:Converting TINS to Other Data Types
    ;Vertex Strings → Arcs : The '''Vertex Strings → Arcs''' command creates an arc in the active coverage of the [[GMS:Map Module|Ma
    2 KB (306 words) - 14:53, 24 October 2017
  • GMS:Borehole Cross Sections
    ...rmine the most likely connections between boreholes. The top and/or bottom arcs of the new cross sections can be warped to match the elevation of [[GMS:TIN ...efault lines. The figure below shows a default cross section. Notice that "arcs" (polylines) have been created defining the top and bottom of the cross sec
    10 KB (1,510 words) - 20:29, 20 February 2023
  • SMS:3D Bridge
    ...of simulating pressure flow in SRH-2D is not compatible with pressure zone arcs in the simulation boundary conditions coverage. Only one of these approache * 3D bridge coverage containing two arcs. These arcs define the upstream and downstream sides of the bridge
    7 KB (1,067 words) - 19:47, 6 October 2023
  • WMS:How to convert a floodplain boundary to a CAD drawing
    # Remove any unwanted arcs from your floodplain boundary
    535 bytes (86 words) - 19:54, 6 March 2013
  • SMS:Model Specific Coverages
    ...g_the_Model#Damping_.2F_Porosity_coverage|Damping]] – Used to create arcs with damping attributes. ..._the_Model#Damping_.2F_Porosity_coverage|Porosity]] – Used to create arcs with porosity attributes.
    7 KB (1,053 words) - 20:07, 10 August 2021
  • WMS:Quick Tour -HEC-RAS
    ...ools in WMS can be used to set up a HEC-RAS GIS Import file. Using feature arcs and polygons, users create a River schematic that consists of a river cente
    637 bytes (96 words) - 16:03, 11 April 2017
  • SMS:GenCade Modeling Process
    ...:GenCade Structures|structures]] in the domain. Assign attributes to these arcs. ...[SMS:GenCade Events|events]] in the simulation. Assign attributes to these arcs.
    4 KB (582 words) - 16:42, 22 September 2017
  • GMS:Including Borehole Cross Sections
    ...cross section data. If this option is selected, the material boundaries (arcs) on the cross sections inherit the horizon ID assigned to the adjacent bore ...on, and second the triangle density of the primary TIN. As mentioned, the arcs on the cross sections inherit the horizon ID from the borehole contact as s
    2 KB (332 words) - 17:49, 15 March 2022
  • WMS:Creating TINs
    ...ed from the background elevation map for TIN vertices created from feature arcs vertices.
    4 KB (617 words) - 15:24, 19 April 2016
  • WMS:Quick Tour - Conceptual Model
    ...eated using a bounding polygon to define the limits of the area and stream arcs to identify the important channel data. The bounding polygon does not need
    691 bytes (111 words) - 15:49, 11 April 2017
  • GMS:Conductance
    === Arcs === ...ons. Therefore, when a conductance is entered for an [[GMS:Feature Objects#Arcs|arc]], it should be entered in terms of '''conductance per unit length'''.
    5 KB (795 words) - 21:17, 24 October 2019
  • SMS:Map Module Tools
    ...r Node''' tool is used to select stand alone feature points or the ends of arcs. A single point is selected by left-clicking directly on it. Multiple point ...essing the ''DELETE'' or ''BACKSPACE'' keys, or from the right-click menu. Arcs attached to the deleted points are deleted.
    15 KB (2,481 words) - 22:00, 30 August 2023
  • SMS:PTM Arc Attributes Dialog
    Feature arcs created in a PTM type coverage can be used to create either [[SMS:PTM_Sourc *''Source ID'' – Used to give multiple source arcs differing IDs so that multiple sources can be tracked.
    3 KB (463 words) - 15:23, 13 January 2020
  • MODAEM Project Workflow
    !style="text-align:left;"|4. Create specified head arcs. {{MODAEM Head Arcs Workflow}}
    3 KB (320 words) - 18:40, 26 October 2016
  • SMS:FESWMS Attributes Dialog
    The FESWMS map coverage allows attributes to be set for arcs and points. ...alog is used to set the attributes for [[SMS:Feature Objects Types|feature arcs]]. Attributes that can be specified for each feature arc include:
    2 KB (294 words) - 14:19, 10 June 2019
  • WMS:DEM Guidelines
    ...nd sub-basin boundaries which can subsequently be converted to a series of arcs and polygons. DEMs can also be converted to TINs and used to develop hydrau ===3. Identify the Watershed Outlet and Convert DEM Streams to Arcs===
    6 KB (976 words) - 22:52, 12 May 2020
  • GMS:2D Grid Commands
    ...ids#Contours_->_Arcs|Contours → Arcs]] : Converts layer contours into arcs that can be manipulated as drawing objects.
    2 KB (354 words) - 17:58, 2 October 2017
  • WMS:GSSHA Embankment Arcs
    ...are placed along the centerline of the actual embankment. These embankment arcs often represent roads that cross a drainage. The embankment arc can interse These feature arcs are then mapped to the nearest cell edge. The embankment acts as a wall all
    5 KB (725 words) - 19:38, 22 May 2019
  • SMS:PTM Create Grid Datasets - Fence Diagrams
    ...s without any vertices. This defines where the fences will be located. The arcs cannot have vertices since only planar surfaces can be represented.
    2 KB (341 words) - 23:25, 13 December 2017
  • WMS:GSSHA Groundwater
    ...n groundwater boundary conditions conceptually to feature points/nodes and arcs on the GSSHA coverage. ...ses/gains'' in the [[WMS:GSSHA Feature Arcs#Arcs Spreadsheet|GSSHA feature arcs ''Properties'' dialog]] in order to model groundwater interaction with the
    6 KB (926 words) - 19:42, 26 April 2019
  • WMS:TR-55 Basin Data
    ...led description of the TR-55 travel time equations that can be assigned to arcs in a time computation coverage.
    3 KB (514 words) - 14:06, 19 October 2017
  • WMS:Smooth GSSHA Streams
    ...ches without branches and then selecting ''GSSHA'' | '''Smooth Stream/Pipe Arcs...''' while in the '''Map Module''' [[File:Map Module Icon.svg|14px]]. This ...ding GSSHA simulations that allows for the use of GIS data objects. Stream arcs are used to define both the spatial extent as well as the hydraulic charact
    7 KB (1,152 words) - 18:02, 21 May 2021
  • SMS:Help or Status Window
    ...hown. When multiple arcs are selected, the combined length of all selected arcs along with the combined number of segments is displayed. For polygons, the
    2 KB (353 words) - 14:12, 24 June 2019
  • WMS:Project Explorer Contents for Map Module
    *'''Build Polygon''': This command builds a polygon with arcs that create a closed loop. *'''Redistribute''': With this command vertices along arcs can be redistributed at either a higher or lower density.
    4 KB (520 words) - 23:45, 17 December 2019
  • GMS:What's New in GMS 10.5 Text
    #Improved snapping to existing objects when creating feature arcs
    805 bytes (112 words) - 21:28, 5 April 2023
  • SMS:Bridge Scour 13.0
    ...ridge Scour Arc Attributes]] below for more information on the order these arcs should be created. # Define arcs
    19 KB (3,127 words) - 21:38, 28 August 2020
  • SMS:Cartesian Grid Data Menu
    ====Land/Water Boundary → Arcs==== ...tributes, this options functions identically to the ''Grid Boundary → Arcs'' option.
    7 KB (1,160 words) - 20:10, 22 March 2022
  • SMS:Interpolate Cross Sections
    New feature arcs are created for the interpolated cross sections.
    778 bytes (110 words) - 14:07, 12 June 2019
  • GMS:Map to Modules
    ...tedly generate a cross section at the same location. In such cases, the '''Arcs → Cross Sections''' command can be used to precisely control the locat ...e the cross sections. Either all of the arcs are used or only the selected arcs. Since cross sections can be cut through any 3D object, the items in the lo
    9 KB (1,620 words) - 15:03, 15 August 2017
  • SMS:PTM Graphical Interface
    === Feature Arcs ===
    3 KB (534 words) - 15:48, 13 September 2017
  • SMS:ADH Vessel Coverage
    ...ath per vessel coverage. The path can be made up of multiple arcs, but the arcs should not split into multiple paths. The one exception to the rule of "one Nodes on arcs change the speed of the boat or, in the case of the first node of the path,
    4 KB (585 words) - 21:23, 4 August 2017
  • SMS:What's New in SMS 13.3
    **Polygons from Arcs (Total refactor for automation) ...ion Information]]. The full list of selected items for mesh nodes, feature arcs and feature polygons are now displayed. When the selection information is b
    2 KB (319 words) - 18:22, 3 October 2023
  • SMS:GenCade Graphical Interface
    ===Feature Arcs=== The [[SMS:GenCade Arc Attributes|arcs]] in a GenCade coverage can be assigned a variety of attributes including:
    5 KB (785 words) - 15:13, 9 April 2019
  • SMS:Map Module Display Options
    * ''Arcs'' – Display of feature arcs in the Graphics Window. The button next to this option allows opening a [[S * ''Vertices'' – Display the vertices along the arcs. The button next to this option allows opening a [[SMS:Display_Options#Sym
    8 KB (1,303 words) - 22:01, 26 March 2024
  • WMS:Map Module
    [[File:MapModuleExample.png|thumb|250 px|Examples of arcs drawn over DEM data in the Map module]] ...ning watershed data using [[WMS:Feature Objects|feature objects]]: points, arcs, and polygons. It is accessed by clicking the [[File:Map Module Icon.svg|16
    2 KB (387 words) - 22:09, 18 December 2019
  • SMS:SRH-2D Summary Report
    *** Number of arcs *** Table of Inlet-Q arcs. Columns include:
    7 KB (972 words) - 18:15, 20 January 2023
  • WMS:Rational Method Basin Data
    ...>'' – Map Data''']] button accesses the dialog that allows combining arcs within the currently selected basin to compute a time of concentration.
    3 KB (433 words) - 17:25, 17 October 2017
  • SMS:TUFLOW Boundary Conditions
    TUFLOW Boundary conditions may be defined at nodes, arcs, or polygons in a [[SMS:TUFLOW Coverages#Boundary Conditions Coverage|bound ===2D Boundary Conditions at Arcs===
    7 KB (1,177 words) - 21:13, 23 September 2019
  • WMS:Hydrologic Modeling Wizard Overview
    ...elevation + the channel depth elevation entered in the [[WMS:GSSHA Feature Arcs|GSSHA Feature Arc Type dialog]]). ...or more stream arcs and edit the attributes or smooth the selected stream arcs.
    11 KB (1,687 words) - 18:07, 15 January 2024
  • GMS:3D Grid Commands
    ; Layer Contours → Arcs : Converts layer contours into arcs that can be manipulated as drawing objects.
    3 KB (471 words) - 20:26, 11 April 2022
  • WMS:GSSHA Feature Nodes
    ...operties'' dialog allows modification of the various attributes of feature arcs. ..., link break, or junction) to each point/node based on the type of feature arcs connected to the node, although the point/node type is not displayed in the
    6 KB (1,029 words) - 22:06, 7 July 2020
  • SMS:Snapping
    ...t_Modification:_All#Clean|''Clean'']] tool can be used to connect nodes of arcs together. This can fix cases where the nodes are not quite touching and thu ...be applied to the linked mesh. Parameters specified for boundary condition arcs or arc defining polygon boundaries are always applied (snapped) to the near
    4 KB (714 words) - 22:56, 4 December 2020
  • SMS:BOUSS-2D Simulations
    ...rating Arcs along land boundary''' – Opens a dialog that will create arcs in a damping or porosity coverage from an existing grid or scatterset. ...rating Arcs along open boundary''' – Opens a dialog that will create arcs in a damping or porosity coverage from an existing grid or scatterset.
    5 KB (830 words) - 21:24, 16 June 2020
  • SMS:Unstructured Grid Generation from a Conceptual Model
    ...y offsetting from the boundaries. The distribution of the vertices on the arcs comprising the polygon control the mesh density. ...ents using the paving approach, but the distribution of vertices along the arcs, and throughout the interior, will be controlled by a scalar dataset specif
    4 KB (683 words) - 21:36, 30 November 2017
  • SMS:TUFLOW ZShape
    The TUFLOW ZShape coverage allows modifying terrain with arcs and setting up triggers to change those modifications, such as at a specifi Arcs in a 2D Z Lines/Polygons (Advanced) coverage store ZShape data only if they
    7 KB (1,082 words) - 21:30, 14 July 2020
  • GMS:2D Mesh Commands
    ; Contours → Arcs : Creates a new coverage containing feature arcs derived from the linear contours displayed on the 2D mesh.
    3 KB (513 words) - 19:18, 11 April 2022
  • SMS:Paving
    ...to match a [[SMS:Arc Size Function|size function]] was moved to the [[SMS:Arcs#Redistribute_Vertices|feature arc redistribution]] command. If the target s
    3 KB (425 words) - 23:47, 6 March 2019
  • SMS:2D Mesh Module Tools Right-Click Menus
    ...eature Arcs''' – Converts all selected elements to feature nodes and arcs on map coverage.
    3 KB (398 words) - 19:12, 18 March 2022
  • WMS:XPSWMM
    # Create and draw arcs representing pipes or channels in a storm drain coverage. # Convert the storm drain coverage arcs to a hydraulic schematic in the river module.
    3 KB (421 words) - 17:59, 17 October 2017
  • WMS:What's new in WMS version 8.2
    ==== [[WMS:GSSHA_Embankment_Arcs|Improved ability for defining embankment arcs]] ==== ...2 has improved ability for defining [[WMS:GSSHA_Embankment_Arcs|embankment arcs]] and running GSSHA embankment routines that was not available in previous
    4 KB (642 words) - 22:04, 15 May 2019
  • SMS:Bridge Scour
    ...Bridge Scour Arc Attributes below for more information on the order these arcs should be created. # Define arcs
    23 KB (3,766 words) - 16:45, 14 October 2022
  • SMS:BOUSS Runup / Overtopping
    Transects are made by creating arcs in the transects coverage. Each transect represents the 1-d grid used for a Wave makers are made by creating arcs in this coverage. The wave maker properties can be edited by double-clickin
    10 KB (1,519 words) - 15:41, 16 July 2019
  • SMS:Observation Coverage
    ...how computed values change with time at a particular location. Observation arcs are used to view the results at a cross section or along the river profile. ...rcs compute fluxes across the arc. Therefore, measurements for observation arcs are called ''Flux Measurements''. Each obseration arc is used to compare th
    12 KB (1,910 words) - 22:14, 16 August 2021
  • GMS:TIN Commands
    ; TIN Contours → Arcs : Creates a new coverage containing feature arcs derived from the linear contours displayed on the TIN. ; Vertex Strings → Arcs : Creates a new coverage containing a feature arc derived from the vertex s
    5 KB (799 words) - 20:15, 13 April 2022
  • WMS:Map Flood
    ...tterset to the ground elevation scatterset and creates a map coverage with arcs delineating the floodplain extents for the base flood (if the option to ''R ...tes it to the ground elevation scatterset, and creates a map coverage with arcs delineating the floodplain extents for floodwater elevations equivalent to
    10 KB (1,627 words) - 18:05, 28 May 2021
  • SMS:Object Info
    **Number of arcs :*Number of arcs
    4 KB (524 words) - 16:47, 19 September 2019
  • SMS:2D Mesh Polygon Properties
    ** Split – The mesh generation algorithm will treat the two arcs meeting at the feature point as separate sides. ** Merge – The mesh generation algorithm will treat the two arcs meeting at the feature point as a single side.
    5 KB (765 words) - 16:45, 8 September 2021
  • SMS:Map Flood
    ...tterset to the ground elevation scatterset and creates a map coverage with arcs delineating the floodplain extents for the base flood (if the option to ''R ...tes it to the ground elevation scatterset, and creates a map coverage with arcs delineating the floodplain extents for floodwater elevations equivalent to
    10 KB (1,672 words) - 19:22, 21 December 2022
  • GMS:2D Mesh Polygon Attributes
    ...the polygons to determine the element sizes on the interior. Any interior arcs and refine points are forced into the new mesh. If the input polygon has va ...' dialog includes a preview window on the left side. This window shows the arcs and nodes of the selected polygon and allows interacting with that definiti
    7 KB (1,103 words) - 21:16, 28 September 2017
  • SMS:Film Loop General Options
    ...icles are initially placed at feature points and at each vertex of feature arcs in the selected coverage.
    3 KB (489 words) - 20:40, 26 September 2019
  • WMS:DEM Basins
    ...ersected by the stream arcs are assigned the basin ID already given to the arcs. The Define Basins procedure then continues by tracing the flow paths of th ...ned stream arcs (independent of those created using the '''DEM→Stream Arcs''' command) that "intercept" flow along a line that might not be represente
    10 KB (1,729 words) - 20:51, 20 May 2020
  • WMS:Drainage Data to Feature Objects
    ...boundary and stream network are converted to feature polygons and feature arcs. The '''Export''' command from the ''File'' menu can then be used to save t
    1 KB (180 words) - 16:02, 21 January 2015
  • SMS:What's New in SMS 13.0
    ...neration process, SMS will no longer redistribute vertices on the boundary arcs based on a size function. This process is available in the ''Redistribute * New '''Snap Mesh to Arcs''' command which changes mesh nodes to match arc nodes and vertices.
    4 KB (618 words) - 22:46, 27 April 2020
  • GMS:HFB Package
    ...ers are defined in one of two ways: (1) they can be defined using a set of arcs in the [[GMS:Map Module|Map module]] or (2) they can be defined one cell bo ...ases, the simplest method is to create one or more Horizontal Flow Barrier arcs in the Map module corresponding to the barriers and let GMS automatically f
    4 KB (560 words) - 17:43, 11 May 2022
  • WMS:Introduction to TINs
    ...or a scanned image inside of WMS), by generated automatically from feature arcs and polygons, or by using DEMs or existing TINs as background elevation map
    1 KB (194 words) - 18:03, 31 July 2013
  • SMS:TUFLOW Coverages
    ...are used in SMS to represent geometry and associated attributes as points, arcs, and polygons. Unlike some models used in SMS, TUFLOW uses coverage data a Boundary conditions (BC) are defined in TUFLOW with points, arcs, or polygons in a 1D–2D BCs and Links coverage. Boundary condition co
    21 KB (3,419 words) - 16:59, 23 September 2019
  • SMS:CMS-Flow Menu
    ...e menu. After creating feature arcs in the coverage, the '''Select Feature Arcs''' [[File:SMS Select Arc Tool.svg|16 px]] tool can be used to bring up a ri
    4 KB (554 words) - 22:20, 18 January 2022
  • GMS:UTEXAS
    ...e Objects#Points|feature point]] coordinates, then connect the points with arcs **Create [[GMS:Feature Objects#Arcs|feature arcs]] with the mouse
    11 KB (1,742 words) - 15:12, 7 June 2019
  • GMS:DRT Package
    Drains can be modeled using points, arcs and/or polygons in a [[GMS:MODFLOW Conceptual Model Approach|conceptual mod ! Parameter !! Points !! Nodes !! Arcs !! Polygons
    4 KB (548 words) - 19:47, 6 March 2023
  • WMS:Storm Drain
    #Define any pipes, ditches, and streams as arcs going from upstream to downstream in the storm drain coverage. ...menu item creates a hydraulic schematic based on the configuration of the arcs and nodes in a Storm Drain or 1D Hydraulic Centerline coverage. If a schem
    5 KB (866 words) - 16:25, 3 January 2019
  • SMS:ADCIRC Coverage 12.3 and earlier
    ...terpreted as open sections of coastline. Closed polylines are converted to arcs and are assigned the attributes of islands.
    3 KB (494 words) - 14:25, 17 June 2019
  • SMS:1D Hyd Cross Section Coverage
    ...rom the centerline arc) and the left and right bank points (from the bank arcs). ; Add Arcs to Mesh : Adds all cross section arcs to an existing mesh.
    17 KB (2,668 words) - 22:31, 15 August 2022
  • WMS:CAD Data
    ...on data types are not supported in the conversion from WMS to CAD, however arcs that make up polygons, or triangles that make up color-filled contours are # Make sure that only the ''Generic'' (under ''Arcs'') box is checked in the ''Map'' tab of the ''Display Options'' dialog.
    7 KB (1,118 words) - 22:21, 2 April 2021
  • SMS:3D Structure
    ...of simulating pressure flow in SRH-2D is not compatible with pressure zone arcs in the simulation boundary conditions coverage. Only one of these approache * 3D structure coverage containing arcs. These arcs define the centerline, abutments, and/or piers of the structure.
    9 KB (1,336 words) - 15:13, 4 March 2024
  • WMS:TIN Breaklines
    ...ate the z values from the existing TIN or to get the z values from feature arcs. The elevations of the new vertices are based on a linear interpolation of
    1 KB (207 words) - 21:54, 23 December 2019
  • GMS:FEMWATER Point / Arc Properties
    ...e used to define the model boundary and the boundaries of recharge zones. Arcs on the outside boundary of the model can also be used to specify boundary ...lineated using arcs. In order to use the coverage to build a 3D mesh, the arcs should be used to build one or more polygons defining the model domain usi
    9 KB (1,520 words) - 17:08, 11 August 2017
  • WMS:Drainage Module Menus
    ; Arcs→Outlets : The '''Arcs→Outlets''' command in the ''DEM'' menu of the Drainage module will aut :[[Image:ArcToOutlet.png|thumb|none|500 px|Outlets created with the '''Arcs⇒Outlets''' command]]
    14 KB (2,293 words) - 22:25, 5 May 2020
  • WMS:GSSHA Solution Data
    ...6px]] button in the ''Solution Results'' column in the [[WMS:GSSHA Feature Arcs#Solution Data|GSSHA feature arc ''Properties'']] dialog. It displays the ou
    1 KB (214 words) - 21:00, 21 May 2019
  • SMS:Shapefiles
    ...are imported into SMS, the data is converted to feature objects, points, arcs, or polygons. Shapefiles are opened through ''File'' | '''Open'''. Only ma * '''Points / Arcs / Polygons''' – Under each of these sections, the file browser butto
    4 KB (625 words) - 22:09, 9 June 2022
  • WMS:Properties Window
    #Feature Arcs ##Cross Section Attributes (for cross section arcs)
    4 KB (534 words) - 17:14, 17 January 2024
  • SMS:Cross Section Notes
    ...n be created by [[SMS:Extract Features Tool|extracting data]] from feature arcs, manually entering cross section data within a project, importing the cross ...e]] must exist, and it should have feature points identified (such as bank arcs).
    7 KB (1,044 words) - 15:25, 1 March 2021
  • WMS:Hydraulic Modeling
    ...Type|1D-Hydraulic Centerline coverage]] including the centerline and bank arcs. #Create the [[WMS:1D-HYD Cross Section Coverage Type|cross section arcs]] at important/required locations along the section of river being modeled.
    4 KB (684 words) - 16:56, 13 June 2018
  • WMS:TIN Guidelines
    ...r a scanned image inside of WMS), by generating automatically from feature arcs and polygons, or by using DEMs or existing TINs as background elevation map ...tour display of a DEM and on-screen digitize the rough boundary and stream arcs.
    8 KB (1,304 words) - 16:44, 20 March 2023
  • GMS:GIS to Feature Objects
    ...data can be converted to [[GMS:Feature Objects|feature objects]] (points, arcs, polygons in coverages) for use in a [[GMS:Conceptual Model|conceptual mode
    1 KB (239 words) - 14:48, 9 April 2018
  • SMS:Quick Tour - Conceptual Models
    ...proach, a conceptual model is created using GIS objects, including points, arcs, and polygons. The conceptual model is constructed independently of a mesh
    1 KB (239 words) - 15:52, 31 March 2017
  • WMS:Creating Watershed Models
    ...ferent features of the map module: polygons representing basin boundaries, arcs representing a stream network, and nodes representing watershed and sub-bas
    1 KB (223 words) - 16:14, 24 February 2016
  • SMS:1D River Module
    ...D-Hydraulic Centerline coverage including the centerline and optional bank arcs. # Creating the cross section arcs at important/required locations along the section of river being modeled.
    8 KB (1,328 words) - 21:48, 24 March 2022
  • SMS:CMS-Flow Coverages 13.0
    ...ry condition data. In CMS-Flow, boundary conditions are defined on feature arcs in a boundary conditions coverage. ...ns for the model or arcs can be converted from other coverages or modules. Arcs can also be imported.
    7 KB (1,147 words) - 17:16, 5 April 2021
  • SMS:Importing Dredge Tracks from ASCII Files
    ..."include paths when dredge not operating" is checked then this will create arcs that do not contain dredging attributes. Otherwise, these portions of the p
    1 KB (226 words) - 15:14, 7 June 2019
  • WMS:Deleting Data
    *[[WMS:Edit Menu#Delete|Deleting selected items]] (vertices, triangles, arcs, etc.) with the '''Delete''' command in the ''Edit'' menu.
    1 KB (249 words) - 22:12, 6 January 2020
  • SMS:Arcs
    ...arcs. Most of these can be accessed by selecting and right-clicking on the arcs that are to be operated on. This command deletes the selected arcs. SMS will prompt to confirm that the deletion is desired if the ''Confirm
    29 KB (5,004 words) - 19:19, 23 February 2024
  • GMS:Building a FEMWATER Model
    ...is defined with [[GMS:Feature Objects|feature objects]], including points, arcs, and polygons, and is constructed independently of a numerical grid. Once ...tain points, arcs, and polygons. The points are used to define wells, the arcs are used to define boundary conditions, and the polygons are used to defin
    9 KB (1,467 words) - 21:15, 5 October 2017
  • SMS:ADCIRC Interface Changes for SMS 13.1
    ...nd earlier. Instead, boundary condition attributes are assigned to feature arcs on an ADCIRC boundary condition coverage which is then mapped to the ADCIRC After the boundary conditions arcs have been created and defined on the ADCIRC boundary condition coverage, th
    5 KB (680 words) - 23:00, 17 March 2021
  • GMS:STR/SFR Packages
    ...fic fashion, a stream network can only be created using a series of Stream Arcs in the [[GMS:Map Module|Map module]]. The cell-by-cell values are automatic *STR and SFR stream arcs cannot both exist in the same coverage because of the stream numbering issu
    9 KB (1,544 words) - 19:34, 23 May 2022
  • SMS:BOUSS-2D Using the Model
    conditions are defined along arcs for porosity/damping, and on nodes for wave makers. Damping and porosity coverages contain arcs that represent damping/porosity. The
    9 KB (1,449 words) - 20:17, 19 December 2017
  • SMS:What's New in SMS 13.1
    ...Extract Features Tool|Extract Features]] tool for generating streams, bank arcs, and cross sections from raster data. *New [[SMS:Arcs#Blend Arcs|create blended arc tool]]
    7 KB (1,034 words) - 21:08, 13 October 2022
  • WMS:WMS User Manual vol. 3
    :[[WMS:GSSHA Embankment Arcs|GSSHA Embankment Arcs]] :[[WMS:GSSHA Feature Arcs|GSSHA Feature Arcs]]
    9 KB (1,250 words) - 19:04, 5 May 2022
  • SMS:CMS-Flow Coverages
    ...ry condition data. In CMS-Flow, boundary conditions are defined on feature arcs in a boundary conditions coverage. ...ns for the model or arcs can be converted from other coverages or modules. Arcs can also be imported.
    8 KB (1,278 words) - 19:49, 17 March 2021
  • WMS:1D-Hyd Cross Section Coverage Type WMS 10.1 and Older
    ...from the centerline arc) and the left and right bank points (from the bank arcs).
    2 KB (251 words) - 14:52, 30 October 2018
  • SMS:ADCIRC Weirs and Island Barriers
    ...ed crest elevations for the weir/barrier. This can also determine if these arcs should be added to a new or existing coverage. If the coverage option is used, SMS will create arcs that represent the weirs or barriers on the specified coverage. The compute
    7 KB (1,095 words) - 14:42, 5 May 2020
  • SMS:What's New in SMS 13.2
    *** Arcs to Polygons * [[SMS:Arcs|CAD type operations]]
    4 KB (498 words) - 16:35, 7 April 2023
  • WMS:Delineation with DEMs
    #Identify the watershed outlet and covert DEM streams to arcs.
    2 KB (251 words) - 21:52, 17 December 2019
  • GMS:Map Module
    ...ide some GIS-like capabilities within GMS. Feature objects include points, arcs, and polygons. Feature objects can be grouped into layers or [[GMS:Coverage
    2 KB (284 words) - 15:43, 17 November 2016
  • SMS:Edit Menu
    ; '''Length''' : Opens a dialog that asks to specify a range. All arcs whose length lies inside that range are selected. This enables all entities ...W_Coverages#Boundary_Conditions_Coverage|TUFLOW]], etc.). Allows selecting arcs by assigned boundary condition type.-->
    7 KB (1,079 words) - 22:28, 26 March 2024
  • GMS:Creating and Editing UGrids
    ...efinement attribute and refinement size. The cells surrounding the points, arcs, and polygons are also refined to smooth change from coarse cells to refine ...d to honor all arc geometry. If refinement is specified as an attribute on arcs or polygons it is ignored.
    12 KB (1,970 words) - 21:40, 18 July 2022
  • Toolbox Dialog Help
    # [[Arcs to Polygons Tool|Arcs to Polygons]] | xms.tool.coverages.arcs_to_polygons_tool
    7 KB (1,085 words) - 21:44, 13 November 2023
  • WMS:WMS Non-native Files
    ...tal Line Graph'' file to be imported and points connected into a series of arcs. USGS DLG files, like DEMs, can be downloaded via the Internet (see the int |Feature Object Arcs Shapefile||*.shp||
    6 KB (1,032 words) - 15:42, 24 February 2016
  • SMS:TUFLOW Flow Constriction Shapes
    ...ea (due to submodel scale features). Flow constrictions can be created for arcs or polygons. Flow constrictions can be specified as polygons or arcs (along a line). For a flow constriction defined by a polygon, some values m
    16 KB (2,570 words) - 22:10, 25 June 2020
  • WMS:1D-HYD Centerline Coverage Type
    ...d may not actually be centered between the two defined left and right bank arcs of the floodplain or channel. Its direction should be from upstream to down
    2 KB (271 words) - 18:47, 4 January 2024
  • GMS:Map to MODFLOW
    ...Second, the flux in/out of the cell will be partitioned to the 2 different arcs in the map module.
    9 KB (1,558 words) - 23:03, 17 October 2023
  • SMS:Activity Classification Coverage
    In the coverage, polygons can be created by creating enclosed arcs and using the [[SMS:Map_Feature_Objects_Menu#General_Commands|''Feature Obj
    2 KB (265 words) - 16:01, 17 November 2016
  • SMS:GIS Conversion and Editing
    #Select the '''Create Feature Arc''' tool and draw a closed set of arcs. #:[[File:TrimmedRaster1.jpg|thumb|none|450 px|Closed set of arcs drawn over a raster.]]
    11 KB (1,698 words) - 19:45, 28 September 2023
  • SMS:ADCIRC Boundary Conditions 12.3 and earlier
    ...e assigned by setting attributes to ''Feature Arcs'' representing boundary arcs in the map coverage domain used to generate the 2D mesh. Boundary types are assigned to feature arcs in the conceptual mode or nodestrings on the ADCIRC mesh. Correct boundary
    8 KB (1,156 words) - 15:58, 11 December 2018
  • SMS:Mesh Data Menu
    *''Mesh Contours → Arcs'' *''Mesh Nodestrings → Arcs''
    6 KB (861 words) - 16:24, 17 March 2022
  • SMS:SRH-2D Errors
    ...the unassigned material polygon to disable the area between the structure arcs because SRH-2D has been modified to do this internally. If encountering thi | Review the arcs for the culverts. Verify that the arcs are correctly paired and drawn in the same direction.
    25 KB (4,119 words) - 23:15, 22 February 2024
  • GIS Conversion and Editing
    #Select the '''Create Feature Arc''' tool and draw a closed set of arcs. #:[[File:TrimmedRaster1.jpg|thumb|none|450 px|Closed set of arcs drawn over a raster.]]
    11 KB (1,728 words) - 18:41, 28 September 2023
  • SMS:Floodway Tools
    ...ydraulic Evaluation Lines'' tool creates a new Area Property coverage with arcs (pseudo cross sections) spaced along the floodplain with the intended purpo The generated arcs are derived to follow water level contours (isolines) at a user specified i
    9 KB (1,372 words) - 18:15, 20 January 2023
  • GMS:Importing/Exporting Shapefiles
    ...example, if the GMS coverage contains arcs, points and nodes, export the arcs to one shapefile and the points and nodes to a separate point shapefile. It
    8 KB (1,243 words) - 15:32, 29 November 2017
  • SMS:SRH-2D Advanced Simulation
    ...n the project. For example, if the type were "Intlet Q" and there were two arcs assigned to an "Inlet Q" boundary condition, then this section would list t ...n the project. For example, if the type were "Intlet Q" and there were two arcs assigned to an "Inlet Q" boundary condition, then this section would list t
    6 KB (918 words) - 19:57, 9 July 2021
  • SMS:Mapping Coverage
    ...alog is used to set the attributes for [[SMS:Feature Objects Types|feature arcs]] in a Mapping type coverage. These attributes will set parameters for the
    2 KB (284 words) - 15:56, 31 August 2017
  • WMS:Project Explorer Contents for River Module
    If making a change to the map data (arcs) used to generate the hydraulic schematic, just re-generate the schematic f
    2 KB (298 words) - 19:56, 26 December 2019
  • SMS:GENESIS Graphical Interface
    ...alog is used to set the attributes for [[SMS:Feature Objects Types|feature arcs]]. Attributes that can be specified for each arc include:
    2 KB (322 words) - 14:44, 4 June 2019
  • SMS:SRH-2D Boundary Conditions 13.0
    ...ulic computation. The boundary conditions for the model are defined on the arcs in an [[SMS:SRH-2D_Coverages#Boundary_Conditions_Coverage|SRH-2D boundary c ...simulations. If the run type is "Mobile", all inflow boundary conditions arcs require sediment inflow specification.
    11 KB (1,743 words) - 18:43, 5 April 2021
  • GMS:HydroGeoSphere Coverages
    ...ns on a HydroGeoSphere boundary conditions coverage. This includes points, arcs, and polygons. Each of these feature objects type have their own unique pro
    2 KB (357 words) - 20:31, 3 May 2024
  • GMS:Calibration Targets
    ...value can be assigned to [[GMS:Feature_Objects|feature objects]]: points, arcs, arc groups and polygons in a coverage. Observation properties are edited i
    2 KB (357 words) - 14:36, 26 October 2017
  • GMS:MODFLOW Post-Processing Viewing Options
    =====Summation of Fluxes on Arcs and Polygons===== This cannot be done for SFR stream arcs since the SFR package does not participate in the Observation Process.
    9 KB (1,502 words) - 21:54, 17 October 2017
  • GMS:Observations
    .... When a MODFLOW solution is imported, the computed flows are read for the arcs and polygons and compared with observed values. ...timation]], a set of head and flow observations are defined using points, arcs, and polygons in the Map module. When entering the point and flow observat
    8 KB (1,287 words) - 18:09, 1 September 2023
  • SMS:Attributes in the Feature Objects Menu
    The following coverages can apply attributes to arcs. * [[SMS:Arcs#Arc Attributes Dialog|BOUSS-2D]] – Uses the ''Cartesian Grid Arc Opti
    10 KB (1,307 words) - 15:41, 11 December 2018
  • WMS:File Extension
    ...gital Line Graph file to be imported and points connected into a series of arcs. USGS DLG files, like DEMs, can be downloaded via the Internet and are avai
    5 KB (815 words) - 15:44, 29 November 2017
  • SMS:Adaptive Tesselation
    ...the polygons to determine the element sizes on the interior. Any interior arcs and refine points are forced into the new mesh. If the input polygon has v
    2 KB (346 words) - 16:04, 26 August 2016
  • WMS:Importing Shapefiles
    ...o a simple display list and does not try to "build" topology by connecting arcs at nodes, and eliminating shared edges of polygons as required when creatin ...ap nodes within a certain distance, intersect arcs, and eliminate dangling arcs.
    14 KB (2,156 words) - 15:26, 29 August 2016
  • SMS:Select/Delete Data...
    <!--*''Feature objects'' selects or deletes points, vertices, arcs, or polygons-->
    2 KB (365 words) - 15:34, 17 March 2022
  • SMS:SMS User Manual vol. 2
    :[[SMS:Arcs|Arcs]]
    7 KB (981 words) - 18:36, 5 May 2022
  • SMS:Converting Feature Objects
    The '''Extract Cross Sections''' command uses the cross section arcs and a digital terrain model (TINs are the only source that can currently b Cross Sections for individual arcs may be extracted by selecting the arc(s) before choosing the '''Extract Cro
    15 KB (2,526 words) - 18:21, 28 August 2020
  • SMS:Feature Stamping
    ...tamping" coverage has attributes to create a stamped feature. For stamping arcs, the direction of the arc is important since attributes are assigned along ...ld be the "toe", but the reference in SMS is the shoulder point. When the arcs representing the shoulder are created, the option is available to create an
    19 KB (2,987 words) - 21:11, 19 November 2018
  • SMS:What's New in SMS 11.2
    * When assigning polygon attributes, internal arcs are now displayed similar to internal feature points. These are incorporat * A new command to allow the creation of offset arcs was added to the arc right-click menu.
    11 KB (1,683 words) - 20:55, 9 January 2023
  • SMS:Generic Model Graphical Interface
    [[File:Feature Arc Attributes.jpg|thumb|200 px|Generic ''Feature Arcs Atributes'' dialog]] ...alog is used to set the attributes for [[SMS:Feature Objects Types|feature arcs]]. Attributes that can be specified for each feature arc include:
    10 KB (1,602 words) - 14:49, 17 June 2020
  • SMS:Summary Table Workflow
    ...determine is the summary table will use a cross section database and which arcs on the centerline coverage to use.
    2 KB (357 words) - 14:52, 24 April 2018
  • SMS:SRH-2D Coverages
    ...protrusions and boulder clusters. Obstructions can be assigned to feature arcs or points. *SMS will separate the monitoring lines from other arcs in the boundary conditions coverage. The monitoring lines will be placed in
    16 KB (2,550 words) - 20:39, 25 February 2022
  • SMS:SRH-2D Coverages 13.0
    The boundary condition coverage consists of a collection of arcs with specified boundary conditions that control the inflow and outflow in a ...protrusions and boulder clusters. Obstructions can be assigned to feature arcs or points.
    18 KB (2,795 words) - 17:25, 5 April 2021
  • SMS:Map Module
    * Extracting feature arcs from the contours of a scatter set. See [[SMS:Scatter Data Menu#Data Conver In the map module, nodes, vertices and arcs all have an elevation attribute. That it's possible to assign an elevation
    7 KB (1,106 words) - 21:38, 17 March 2022
  • SMS:TUFLOW FV
    ...dary conditions coverage allows assigning boundary condition attributes to arcs drawn in the coverage. These attributes will then be assigned, or snapped, Attributes are assigned to arcs by right-clicking a selected arc and selecting the Assign BC command. This
    7 KB (1,012 words) - 17:14, 28 March 2023
  • SMS:CGWAVE Graphical Interface
    ...idered a boundary condition during the mesh generation process. Remove any arcs outside of the domain to prevent disjointed nodes and nodestring numbering
    8 KB (1,328 words) - 15:03, 23 March 2022
  • SMS:Release Notes SMS 10.0
    # Fixed a problem where Shapefile->Map created additional arcs ...roblem with observation attribute names for arcs when using both nodes and arcs
    14 KB (2,218 words) - 23:45, 9 January 2023
  • WMS:Extract Features Tool
    ...te features arcs on a map coverage. Currently, the extract feature feature arcs can be centerlines of channels, centerlines of ridges, cross sections of ch File:ExtractFeatures-BanksfromCenterlines.png|Bank arcs generated from centerline and user-defined bank location
    14 KB (2,139 words) - 19:26, 27 May 2021
  • SMS:Error Summary Plot
    ...dash; Sets which feature object is utilized in the current plot, points or arcs. If there is only one, it simply displays the name of the feature object.
    3 KB (432 words) - 20:07, 14 April 2022
  • SMS:Extract Features Tool
    ...te features arcs on a map coverage. Currently, the extract feature feature arcs can be centerlines of channels, centerlines of ridges, cross sections of ch File:ExtractFeatures-BanksfromCenterlines.png|Bank arcs generated from centerline and user-defined bank location
    14 KB (2,152 words) - 19:57, 1 November 2021
  • SMS:SRH-2D Boundary Conditions
    ...in a simulation. The boundary conditions for the model are defined on the arcs in an [[SMS:SRH-2D_Coverages#Boundary_Conditions_Coverage|SRH-2D boundary c In general, two arcs must be selected before assigning arcs a structure boundary condition.
    11 KB (1,715 words) - 20:30, 10 May 2024
  • SMS:BOUSS-2D Graphical Interface
    [[File:BOUSS GenerateArcs.png|thumb|250 px|Example of the BOUSS-2D ''Generate Arcs'' dialog.]] ; '''Generating Arcs along land boundary''' : Opens a dialog that will create arcs in a damping or porosity coverage from an existing grid or scatterset.
    14 KB (2,143 words) - 20:46, 19 July 2019
  • WMS:GSSHA Maps
    **"All" &ndash; Show all stream arcs. **"Selected" &ndash; Show only selected stream arcs.
    8 KB (1,291 words) - 22:05, 9 May 2019
  • SMS:FESWMS BC Nodestrings
    Generic 2D mesh boundary conditions are generally defined on feature arcs in the conceptual model or nodestrings on the 2D mesh. Boundary conditions
    3 KB (411 words) - 14:19, 10 June 2019
  • GMS:Map to Models
    ...he wells, boundary conditions, and recharge zones assigned to the points, arcs, and polygons in the conceptual model to the nodes and element faces of th
    3 KB (463 words) - 14:53, 15 August 2017
  • SMS:Computed vs. Observed Data Plot
    ...dash; Sets which feature object is utilized in the current plot, points or arcs. If there is only one, it simply displays the name of the feature object.
    3 KB (506 words) - 20:01, 14 April 2022
  • GMS:MODFLOW Conceptual Model Approach
    ...ap module]] using [[GMS:Feature Objects|feature objects]], such as points, arcs, and polygons. The conceptual model is constructed ''<u>independently</u>'' ...and polygons that represent hydrologic features at the site. These points, arcs and polygons are assigned types that correspond to the feature they represe
    11 KB (1,752 words) - 16:54, 28 November 2017
  • SMS:GIS Module
    This command uses the selected arcs or nodes in the active coverage to edit the elevation of cells in the DEM. * Create arcs/nodes at the locations where an edit to the DEM is desired.
    7 KB (1,104 words) - 14:37, 9 April 2018
  • SMS:Residual vs. Observed Data Plot
    ...dash; Sets which feature object is utilized in the current plot, points or arcs. If there is only one, it simply displays the name of the feature object.
    3 KB (519 words) - 20:01, 14 April 2022
  • WMS:1D-HYD Cross Section Coverage Type
    ...eExample.png|thumb|right|Example cross sections with a centerline and bank arcs.]] ...rom the centerline arc), and the left and right bank points (from the bank arcs).
    27 KB (4,269 words) - 18:56, 4 January 2024
  • GMS:Model Calibration
    ..._Module|Map module]] and are associated with [[GMS:Feature_Objects|points, arcs, and polygons]]. Point observations represent locations in the field where
    3 KB (505 words) - 21:49, 4 January 2023
  • WMS:WMS User Manual vol. 2
    :[[WMS:DEM to Stream Arcs|DEM to Stream Arcs]]
    8 KB (1,104 words) - 22:12, 18 December 2019
  • GMS:RIV Package
    ...he [[GMS:Map Module|Map module]]. River attributes are typically used with arcs but may also be associated with polygons and points. The river parameters i
    3 KB (499 words) - 19:51, 6 March 2023
  • SMS:What's New in SMS 11.1
    ...a conceptual model. For more information, see [[SMS:Arcs|Select Connected Arcs]]. ...er specified criterion. For more information, see [[SMS:Arcs|Split Feature Arcs Utility]].
    13 KB (1,958 words) - 21:06, 9 January 2023
  • SMS:AdH Simulations
    * Boundary Conditions coverage &ndash; Contains arcs defining the boundary condition attributes for the model run.
    3 KB (532 words) - 19:55, 11 September 2023
  • SMS:Mesh Tools Coverage
    Do not include arcs that are connected as those will cause overlapping polygons, which will giv
    3 KB (524 words) - 19:51, 10 August 2021
  • WMS:What's new in WMS version 8.4
    ...ttom is available in the model, display the following in the Smooth stream arcs dialog and allow user to edit all of these .... Turning the Storm/Tile Drain option on Job control and then creating the arcs seemed
    6 KB (892 words) - 14:28, 12 September 2016
  • SMS:Select Intersecting Objects
    ***"Arcs" &ndash; Enables the selection of an arc within the selected polygon.
    4 KB (617 words) - 20:14, 17 March 2021
  • SMS:SRH-2D Structures
    * Each structure is specified by selecting two arcs which represent the upstream and downstream faces of the structure. * The two arcs '''''must be ordered in the same direction''''' (i.e. left to right as look
    35 KB (5,402 words) - 16:46, 25 January 2024
  • GMS:Error Summary Plot
    ...: Displays which feature object is utilized in the current plot, points or arcs.
    3 KB (577 words) - 16:14, 25 August 2017
  • SMS:What's New in SMS 10.0
    ...This allows the creation of a single curve in a profile plot from several arcs. Since each arc can have its own color it makes it easy to identify specifi
    7 KB (996 words) - 21:32, 9 January 2023
  • WMS:Icon Gallery
    File:GIS Stream Data Shapefile.svg|Shapefile Arcs File:GIS Stream Data Shapefile.svg|Shapefile Arcs
    13 KB (2,003 words) - 14:12, 2 November 2021
  • WMS:Lag Time and Time of Concentration
    ...le and then define the "representative" flow paths within each basin using arcs that are used to determine lag or time of concentration. A travel time equa
    4 KB (579 words) - 16:07, 7 December 2016
  • WMS:January2009Webinar
    ...are conceptualized by using stream arcs on the Drainage coverage. Stream arcs are created by: ...ce, but it may be possible using the combination of [[WMS:GSSHA Embankment Arcs|embankments]] and a culvert hydraulic structure. The channel routing formu
    16 KB (2,559 words) - 19:37, 23 March 2020
  • SMS:Error vs. Time Step Plot
    ...dash; Sets which feature object is utilized in the current plot, points or arcs. If there is only one, it simply displays the name of the feature object.
    3 KB (540 words) - 21:46, 14 April 2022
  • GMS:CAD Options
    ...CAD points are turned into points, CAD lines and polylines are turned into arcs, and CAD polygons are turned into polygons. The feature objects are added t
    4 KB (642 words) - 14:24, 13 June 2022
  • Tool Dialog Help
    # [[Polygons from Arcs Tool|Polygons from Arcs]] | e6d13536-805c-4e66-b770-4d969ce1bf24 # [[Reorient Stream Arcs Tool | Reorient Stream Arcs]] | 1c17772e-8ff0-4a1e-88a7-cc4db0bcede8
    14 KB (2,433 words) - 19:30, 30 April 2024
  • SMS:Define TUFLOW domain
    ...es/Polygons (Simple) coverage]] can also be used to force elevations using arcs or polygons.
    3 KB (569 words) - 16:06, 6 October 2017
  • WMS:WMS User Manual 10.1
    :[[WMS:DEM to Stream Arcs|DEM to Stream Arcs]] :[[WMS:Arcs to Outlets|Arcs to Outlets]]
    22 KB (2,974 words) - 23:02, 9 January 2023
  • SMS:2D Mesh Module Menus
    * '''Snap Mesh to Arc''' &ndash; Snaps the Mesh to the arcs created.
    4 KB (549 words) - 20:16, 15 April 2022
  • WMS:What's new in WMS version 10.0
    ...the GSSHA arc properties dialog. If this option is defined for one of the arcs, the global option is turned off.
    8 KB (1,190 words) - 23:36, 9 January 2023
  • WMS:DEM Point Attributes
    .... If desired, [[WMS:Editing DEM Elevations|edit elevations]] using feature arcs if wanting to make changes along a river, ridge, levee, or some other featu
    4 KB (605 words) - 22:10, 17 December 2019
  • WMS:WMS User Manual 10.0
    :[[WMS:DEM to Stream Arcs|DEM to Stream Arcs]] :[[WMS:Arcs to Outlets|Arcs to Outlets]]
    23 KB (3,071 words) - 22:58, 9 January 2023
  • SMS:PTM
    ...MS:Feature Objects Types#Points|points]], [[SMS:Feature Objects Types#Arcs|arcs]], and [[SMS:Feature Objects Types#Polygons|polygons]]
    9 KB (1,300 words) - 21:21, 27 April 2023
  • SMS:Release Notes SMS 12.0
    *8117 BOUSS-2D Generating arcs along land boundaries not using elevation scalar set. *8157 Delete key unresponsive when deleting arcs and other map objects.
    10 KB (1,383 words) - 23:46, 9 January 2023
  • SMS:GIS Module Menus
    ...a GIS coverage a sub-menu appears with the options to convert GIS points, arcs and polygons to geometric objects of another type along with any appropriat ...t step of the wizard brings up the attribute mapping dialog (for polygons, arcs, or points depending on the type of GIS coverage(s) specified as the source
    15 KB (2,341 words) - 20:55, 22 March 2022
  • SMS:What's New in SMS 12.1
    * Mesh elements can be selected and converted into feature arcs. The arcs have the default attributes of the coverage they are assigned to.
    7 KB (1,168 words) - 18:15, 20 January 2023
  • SMS:What's New in SMS 12.0
    ...d to the arc. This can be thought of as the corollary to intersecting two arcs that just barely overlap and deleting the resulting dangling end. * SMS can now select arcs/nodes by attribute type.
    11 KB (1,691 words) - 20:38, 9 January 2023
  • WMS:TIN Options
    When [[WMS:TIN Breaklines|enforcing breaklines]] with feature arcs, elevations can be linearly interpolated from the TIN, or derived from the
    4 KB (624 words) - 19:15, 13 May 2020
  • SMS:SRH-2D
    ...thymetry data, an SRH-2D Boundary Conditions coverage which holds boundary arcs and flow data, an SRH-2D Materials coverage which maps material types defin ...tics. Keep in mind that SMS has a variety of tools available to adjust the arcs to meet the modeling needs of the project.
    28 KB (4,242 words) - 22:07, 1 May 2023
  • SMS:Synthetic Storm Coverage
    The coverage must contain a single track made up of multiple arcs. The locations of starting minimum central pressure, ending minimum central
    4 KB (592 words) - 16:15, 19 September 2017
  • GMS:DRN Package
    The drain attribute may be associated with points, arcs, or polygons. There are two parameters that are associated with a drain: el
    4 KB (656 words) - 19:46, 6 March 2023
  • WMS:Streams
    ...consecutive channel edges together. They appear similar to stream feature arcs, but are not. On a TIN the streams are defined simply as connected vertice
    4 KB (662 words) - 21:56, 30 December 2019
  • SMS:GenCade Structures
    ...et and its left and right bypass. These can be set by creating attachment arcs by the inlet before mapping to a 1D grid. If there are two inlets with one
    4 KB (620 words) - 16:29, 12 July 2019
  • GMS:Borehole Commands
    ...ns to TIN...]] : Opens a dialog that allows snapping the top and/or bottom arcs of the cross sections to TINs.
    5 KB (697 words) - 18:52, 29 March 2022
  • SMS:CAD Data
    ...CAD points are turned into points, CAD lines and polylines are turned into arcs, and CAD polygons are turned into polygons. The ''Clean Option'' dialog wil
    4 KB (687 words) - 21:40, 2 April 2021
  • WMS:WMS User Manual 9.1
    :[[WMS:DEM to Stream Arcs|DEM to Stream Arcs]] :[[WMS:Arcs to Outlets|Arcs to Outlets]]
    25 KB (3,355 words) - 22:56, 9 January 2023
  • GMS:MODAEM
    ...e input data to MODAEM is consistent with the GIS feature objects (points, arcs, and polygons) used to define a GMS conceptual model. In other words, once
    4 KB (659 words) - 15:45, 28 June 2018
  • SMS:Icon Gallery
    File:GIS Stream Data Shapefile.svg|Shapefile Arcs File:GIS Stream Data Shapefile.svg|Shapefile Arcs
    19 KB (3,142 words) - 23:18, 5 December 2023
  • SMS:ADCIRC Tutorial
    ...terpreted as open sections of coastline. Closed polylines are converted to arcs and are assigned the attributes of islands. ...Map module. Boundary types are prescribed by setting attributes to Feature Arcs. To set the boundary types:
    27 KB (4,422 words) - 22:34, 10 April 2013
  • XMS:What's New in SMS 11.1
    *Select all arcs connected sequentially to define a polygon. Can be used to detect poor con *Split arcs based on user specified criterion. Click here to learn more.
    9 KB (1,399 words) - 15:35, 24 September 2018
  • SMS:Native SMS Files
    |Export node and vertice x, y locations of coastline arcs
    4 KB (683 words) - 22:18, 27 June 2018
  • GMS:Parameters
    ...e or by assigning the values to a set of [[GMS:Feature_Objects|polygons or arcs]] in the [[GMS:Feature_Objects#Conceptual_Models|conceptual model]] and sel
    5 KB (775 words) - 20:52, 26 April 2022
  • SMS:ADCIRC Graphical Interface 13.0
    * Boundary Conditions coverage &ndash; Contains arcs defining the boundary condition attributes for the model run.
    5 KB (772 words) - 18:42, 5 April 2021
  • SMS:Editing Cross Sections
    ...models from within WMS) locations. When using a centerline and bank line arcs from a 1D Hydraulic Centerline coverage during extraction these points are
    5 KB (846 words) - 20:48, 18 April 2022
  • WMS:Editing Cross Sections
    ...c models from within WMS) locations. When using a centerline and bank line arcs from a 1D Hydraulic Centerline coverage during extraction these points are
    5 KB (849 words) - 22:48, 4 May 2020
  • Blog Post Directory
    | srh, structures, arc error, arc direction, drawing arcs | modpath, pathlines to arcs, reports
    58 KB (6,637 words) - 20:07, 7 May 2024
  • SMS:ADCIRC Coverages 13.0
    ...e assigned by setting attributes to ''Feature Arcs'' representing boundary arcs in the domain used in the sifmulation. Boundary types are assigned to feature arcs in the conceptual mode or nodestrings on the ADCIRC mesh. Correct boundary
    20 KB (3,055 words) - 17:17, 5 April 2021
  • WMS:WMS User Manual 11.0
    :[[WMS:GSSHA Embankment Arcs|GSSHA Embankment Arcs]] :[[WMS:GSSHA Feature Arcs|GSSHA Feature Arcs]]
    22 KB (2,908 words) - 23:03, 9 January 2023
  • SMS:Arc Size Function
    *[[SMS:Arcs#Redistribute Vertices|Redistribute Vertices]]
    7 KB (972 words) - 14:26, 17 September 2019
  • WMS:WMS User Manual 11.1
    :[[WMS:GSSHA Embankment Arcs|GSSHA Embankment Arcs]] :[[WMS:GSSHA Feature Arcs|GSSHA Feature Arcs]]
    22 KB (2,917 words) - 21:07, 6 February 2023
  • WMS:WMS User Manual 11.2
    :[[WMS:GSSHA Embankment Arcs|GSSHA Embankment Arcs]] :[[WMS:GSSHA Feature Arcs|GSSHA Feature Arcs]]
    22 KB (2,928 words) - 21:31, 21 November 2023
  • SMS:SMS User Manual vol. 1
    :[[SMS:Arcs|Arcs]]
    13 KB (1,678 words) - 18:36, 5 May 2022
  • GMS:File Import Wizard Supported File Formats
    ...ta|transient point data]] but for [[GMS:Feature Objects#Arcs|arcs]]. Since arcs don't have a single XY location they must be matched by ID or name.
    24 KB (3,306 words) - 14:08, 14 May 2019
  • SMS:STWAVE Graphical Interface
    * Spectral coverage &ndash; Contains arcs defining the boundary condition attributes for the model run.
    6 KB (887 words) - 21:47, 6 September 2022
  • SMS:ADCIRC Coverages
    ...e assigned by setting attributes to ''Feature Arcs'' representing boundary arcs in the domain used in the simulation. Boundary types are assigned to feature arcs in the conceptual mode or nodestrings on the ADCIRC mesh. Correct boundary
    22 KB (3,341 words) - 15:48, 28 March 2023
  • SMS:SRH-2D Plots
    ...RH-2D structure, in the boundary conditions coverage, select the structure arcs then right-click and select the '''Structure Output Plots''' command to ope
    6 KB (987 words) - 20:19, 10 January 2024
  • WMS:Customization Dialog
    **''Grid in front of data'' &ndash; The grid lines are shown in front of arcs, labels, and anything else in the plot.
    7 KB (991 words) - 15:04, 18 April 2019
  • SMS:Coverages
    ...g to a list of attributes associated with a type of coverage. For example, arcs in mesh coverages have boundary conditions compatible with the specific fin
    6 KB (962 words) - 19:26, 20 December 2022
  • SMS:ADCIRC Graphical Interface
    * Boundary Conditions coverage &ndash; Contains arcs defining the boundary condition attributes for the model run.
    7 KB (975 words) - 21:15, 9 February 2023
  • GMS:Cross Sections
    ...age''' command. The outer boundary of each material zone is converted into arcs and polygons are automatically built.
    6 KB (1,049 words) - 15:47, 3 May 2022
  • GMS:Icon Gallery
    File:GIS Stream Data Shapefile.svg|Shapefile Arcs File:GIS Stream Data Shapefile.svg|Shapefile Arcs
    26 KB (4,335 words) - 23:47, 5 December 2023
  • WMS:GSSHA Menu
    ; Smooth Stream/Pipe Arcs...
    6 KB (964 words) - 17:57, 21 May 2021
  • GMS:CLN Process
    ...utes of such a linear network. Attributes can optionally be applied to the arcs of the shapefile.
    5 KB (844 words) - 19:36, 26 April 2017
  • WMS:GSSHA Feature Polygons
    ..." and that the elevations of the arc are set in the [[WMS:GSSHA Embankment Arcs#Embankment Arc Profile Editor Dialog|''Embankment Arc Profile Editor'' dial
    6 KB (891 words) - 20:17, 24 April 2019
  • GMS:Automated Parameter Estimation
    ...bservations#Flow Observations|Flow observations]] are assigned directly to arcs and polygons in source/sink coverages. Each of the observations is assigned
    7 KB (1,016 words) - 14:20, 26 October 2017
  • GMS:MT3DMS Source/Sink Mixing Package
    .... Concentrations can be assigned directly to [[GMS:Feature Objects|points, arcs, and polygons]]; points representing point sources/sinks and polygons repre
    6 KB (1,039 words) - 22:47, 12 February 2024
  • SMS:2D Mesh Nodestrings Menu
    ...trings to assign boundary conditions is transitioning to the assignment on arcs in a boundary condition coverage.
    7 KB (1,069 words) - 21:53, 17 March 2022
  • SMS:File Import Wizard Supported File Formats
    ...d either arc ID's or tags (same as how SMS reads in breaklines) and create arcs from the points.
    9 KB (1,187 words) - 16:55, 21 February 2019
  • WMS:GSSHA
    ...ream flow/routing models. Parameters for stream channels are defined using arcs and then mapped to the appropriate underlying grid cells.
    6 KB (999 words) - 23:05, 13 May 2021
  • SMS:Release Notes SMS 11.0
    #Fixed an issue of editing BC curves associated with arcs in a TUFOW coverage. Changing the curve used to change it for other copies #Corrected an issue first seen in SMS 11.0.4 where internal arcs were not handled correctly when creating a 2D mesh.
    24 KB (3,926 words) - 23:46, 9 January 2023
  • SMS:Vector Display Options
    ...n a coverage" &ndash; Display vectors on the vertices and nodes of feature arcs in the specified coverage (active or specified).
    7 KB (1,157 words) - 19:46, 23 April 2024
  • WMS:WMS 8.1 Dialog Help
    * [[WMS:GSSHA Feature Arcs|Feature Arc Type]] | 4707 | IDD_FEATUREARC_TYPE * [[WMS:GSSHA Embankment Arcs|Embankment Arc Profile Editor]] | 3413 | IDD_GSSHAARCEMBANKMENTATTS
    22 KB (2,627 words) - 22:23, 27 January 2020
  • SMS:Release Notes SMS 10.1
    ...esh generation that occurred when degenerate loops (made out of degenerate arcs) exist in the conceptual model. #Fixed a problem that profile plots with multiple arcs were not being displayed correctly.
    12 KB (1,983 words) - 23:45, 9 January 2023
  • WMS:TIN Menu
    ...: Converts the current linear contours from the TIN to a series of feature arcs which could then be exported as a shapefile.
    7 KB (1,157 words) - 19:57, 13 May 2020
  • SMS:HEC-RAS
    *1D Hyd Cross Sections coverage with defined cross section arcs.
    7 KB (975 words) - 18:55, 20 August 2020
  • GMS:Coverages
    ...y selected cells as river cells. River attributes are typically used with arcs but may also be associated with polygons and points. The river parameters i ...ers are defined in one of two ways: (1) they can be defined using a set of arcs in the Map module or (2) they can be defined one cell boundary at a time.
    16 KB (2,620 words) - 19:19, 10 November 2023
  • WMS:Project Explorer Contents for Terrain Data Module
    ...: Converts the current linear contours from the TIN to a series of feature arcs which could then be exported as a shapefile.
    8 KB (1,218 words) - 17:37, 17 December 2019
  • SMS:SMS 11.2 Dialog Help
    # [[SMS:Arcs#Redistribute Vertices|Redistribute Vertices]] | 129 | IDD_REDISTVERT # [[SMS:Arcs#Arc Attributes Dialog|Arc Attributes Dialog]] | 219 | IDD_MAPPING_ARCATTS
    56 KB (7,016 words) - 18:35, 5 May 2022
  • SMS:LTEA 12.3 and earlier
    ...perform the basic conversion. The conceptual model must be defined on the arcs created in this way. ...sity at the coastline was controlled by redistributing the vertices on the arcs representing the coastline and the density varied to a larger ocean boundar
    10 KB (1,579 words) - 19:17, 20 November 2018
  • WMS:GSSHA Hydraulic Structures
    Link-break type nodes on GSSHA stream arcs (trapezoidal or cross-section) are used for defining known points of contro
    9 KB (1,404 words) - 20:30, 24 April 2019
  • SMS:SMS 12.0 Dialog Help
    # [[SMS:Arcs#Redistribute Vertices|Redistribute Vertices]] | 129 | IDD_REDISTVERT # [[SMS:Arcs#Arc Attributes Dialog|Arc Attributes Dialog]] | 219 | IDD_MAPPING_ARCATTS
    57 KB (7,049 words) - 18:36, 5 May 2022
  • SMS:SMS 12.1 Dialog Help
    # [[SMS:Arcs#Redistribute Vertices|Redistribute Vertices]] | 129 | IDD_REDISTVERT # [[SMS:Arcs#Arc Attributes Dialog|Arc Attributes Dialog]] | 219 | IDD_MAPPING_ARCATTS
    55 KB (6,908 words) - 18:40, 5 May 2022
  • SMS:SMS 12.2 Dialog Help
    # [[SMS:Arcs#Redistribute Vertices|Redistribute Vertices]] | 129 | IDD_REDISTVERT # [[SMS:Arcs#Arc Attributes Dialog|Arc Attributes Dialog]] | 219 | IDD_MAPPING_ARCATTS
    56 KB (6,974 words) - 18:44, 5 May 2022
  • SMS:Release Notes SMS 11.2
    *8159 Creating Arcs changes feature point numbering *7741 Merging coverages does not maintain elevation of arcs
    20 KB (2,895 words) - 23:45, 9 January 2023
  • SMS:SMS 12.3 Dialog Help
    # [[SMS:Arcs#Redistribute Vertices|Redistribute Vertices]] | 129 | IDD_REDISTVERT # [[SMS:Arcs#Arc Attributes Dialog|Arc Attributes Dialog]] | 219 | IDD_MAPPING_ARCATTS
    56 KB (6,992 words) - 18:45, 5 May 2022
  • SMS:SMS 13.0 Dialog Help
    # [[SMS:Arcs#Redistribute Vertices|Redistribute Vertices]] | 129 | IDD_REDISTVERT # [[SMS:Arcs#Arc Attributes Dialog|Arc Attributes Dialog]] | 219 | IDD_MAPPING_ARCATTS
    57 KB (7,053 words) - 18:45, 5 May 2022
  • SMS:SMS 13.1 Dialog Help
    # [[SMS:Arcs#Redistribute Vertices|Redistribute Vertices]] | 129 | IDD_REDISTVERT # [[SMS:Arcs#Arc Attributes Dialog|Arc Attributes Dialog]] | 219 | IDD_MAPPING_ARCATTS
    57 KB (7,152 words) - 18:46, 5 May 2022
  • GMS:Preferences
    ...) to displayed nodes and vertices from other displayed coverages while the arcs are being drawn. When using the '''Create Arc''' tool, getting close to nod
    20 KB (3,142 words) - 18:50, 5 May 2022
  • WMS:What's new in WMS version 9.1
    If the correct attributes have been assigned to arcs in a shapefile, WMS now imports storm drain attributes such as names, shape
    9 KB (1,412 words) - 23:36, 9 January 2023
  • SMS:SMS 13.2 Dialog Help
    # [[SMS:Arcs#Redistribute Vertices|Redistribute Vertices]] | 129 | IDD_REDISTVERT # [[SMS:Arcs#Arc Attributes Dialog|Arc Attributes Dialog]] | 219 | IDD_MAPPING_ARCATTS
    58 KB (7,218 words) - 17:35, 28 November 2022
  • SMS:SMS 13.3 Dialog Help
    # [[SMS:Arcs#Redistribute Vertices|Redistribute Vertices]] | 129 | IDD_REDISTVERT # [[SMS:Arcs#Arc Attributes Dialog|Arc Attributes Dialog]] | 219 | IDD_MAPPING_ARCATTS
    58 KB (7,253 words) - 20:33, 8 March 2024
  • SMS:SMS 99.99 Dialog Help
    # [[SMS:Arcs#Redistribute Vertices|Redistribute Vertices]] | 129 | IDD_REDISTVERT # [[SMS:Arcs#Arc Attributes Dialog|Arc Attributes Dialog]] | 219 | IDD_MAPPING_ARCATTS
    58 KB (7,253 words) - 20:36, 8 March 2024
  • GMS:MODFLOW-USG Observations
    ...vations'' and ''FlowSample.'' Flow observations may be assigned to points, arcs, arc groups, and polygons that are associated with a MODFLOW boundary condi
    11 KB (1,745 words) - 14:31, 26 October 2017
  • SMS:Dynamic Model Interface Schema
    | info = Used to specify what attributes should be used for the arcs of a coverage. ...that opens a canvas window that allows users to select one or more points, arcs or polygons that are in the main window.
    163 KB (21,788 words) - 16:04, 4 March 2019
  • SMS:Version History
    ****Polygons from Arcs (Total refactor for automation) ##*** Arcs to Polygons
    79 KB (12,273 words) - 21:15, 3 October 2023
  • SMS:ADCIRC Wind Coverage
    ...storm, such as a tropical depression or hurricane, as an arc or series of arcs that follow the storm track and define the storm attributes at the nodes al
    9 KB (1,465 words) - 15:47, 28 April 2023
  • SMS:CMS-Flow
    * Define arcs where forced water levels or flows are to be applied to the simulation. De
    10 KB (1,500 words) - 22:36, 26 April 2023
  • WMS:Version History
    ...the GSSHA arc properties dialog. If this option is defined for one of the arcs, the global option is turned off. #*If the correct attributes have been assigned to arcs in a shapefile, WMS now imports storm drain attributes such as names, shape
    47 KB (7,606 words) - 21:01, 26 May 2023
  • GMS:Toolbars
    ...le:Build Polygons Macro.svg|16 px]] &ndash; Creates polygons out of closed arcs.
    12 KB (1,934 words) - 14:22, 23 October 2017
  • GMS:Version History
    * MODPATH pathline to arcs command
    10 KB (1,228 words) - 23:20, 11 January 2024
  • SMS:SMS User Manual 12.1
    :[[SMS:Arcs|Arcs]]
    26 KB (3,579 words) - 20:26, 9 January 2023
  • SMS:SMS User Manual 13.0
    :[[SMS:Arcs|Arcs]]
    26 KB (3,568 words) - 19:29, 9 January 2023
  • SMS:SMS User Manual 12.3
    :[[SMS:Arcs|Arcs]]
    26 KB (3,598 words) - 20:20, 9 January 2023
  • SMS:LTEA
    ...sity at the coastline was controlled by redistributing the vertices on the arcs representing the coastline and the density varied to a larger ocean boundar
    12 KB (1,790 words) - 18:50, 24 March 2023
  • SMS:SMS User Manual 12.2
    :[[SMS:Arcs|Arcs]]
    27 KB (3,630 words) - 20:30, 9 January 2023
  • SMS:SMS User Manual 13.1
    :[[SMS:Arcs|Arcs]]
    27 KB (3,677 words) - 19:26, 9 January 2023
  • SMS:SMS User Manual 13.2
    :[[SMS:Arcs|Arcs]]
    27 KB (3,714 words) - 17:11, 28 March 2023
  • SMS:AdH Boundary Conditions
    ...s coverage for AdH allows assigning boundary condition attributes for both arcs and points.
    17 KB (2,438 words) - 19:55, 11 September 2023
  • SMS:SMS User Manual 13.3
    :[[SMS:Arcs|Arcs]]
    28 KB (3,788 words) - 20:24, 16 November 2023
  • SMS:SMS User Manual 12.0
    :[[SMS:Arcs|Arcs]]
    29 KB (3,960 words) - 20:35, 9 January 2023
  • SMS:SMS User Manual 11.2
    :[[SMS:Arcs|Arcs]]
    29 KB (3,953 words) - 20:48, 9 January 2023
  • WMS:Tutorials History
    !''DEM Delineation &ndash; Stream Arcs'' ...s.pdf|https://s3.amazonaws.com/wmstutorials-11.2.aquaveo.com/demdel-stream-arcs.zip|1}}
    105 KB (11,733 words) - 18:22, 11 September 2023
  • SMS:SMS User Manual 11.1
    :[[SMS:Arcs|Arcs]]
    33 KB (4,655 words) - 20:51, 9 January 2023
  • SMS:What's New in SMS 11.0
    *Find/select map points, arcs, and polygons by id (use zoom to selection to find in busy coverages)
    11 KB (1,736 words) - 21:14, 9 January 2023
  • GMS:Release Notes GMS
    *14274 Feature Request: allow the cross section editor to interpolate to arcs using rasters the same way as TINs. *14038 "Float division by zero" error when running Arcs to Polygons tool.
    68 KB (9,854 words) - 16:58, 15 May 2024
  • GMS:Older Release Notes GMS
    *6811 01-09-2014 01-14-2014 Layer Contours -> Arcs says "No linear contours exist. Aborting." *5885 2-1-13 2-5-13 Pathline to Arcs does not create Arcs
    69 KB (10,607 words) - 23:45, 9 January 2023
  • WMS:MWBM Wizard
    ......'' &ndash; Click '''Define...''' to bring up the [[WMS:GSSHA Embankment Arcs|''Embankment Arc Profile Editor'' dialog]].
    23 KB (3,644 words) - 20:28, 22 March 2019
  • SMS:Release Notes SMS
    *14916 GUI Test: Inserting EWN feature arcs creates a huge hole in the new mesh *14975 Issues with inserting arcs into a mesh
    134 KB (19,043 words) - 16:49, 15 May 2024
  • SMS:Release Notes SMS 11.1
    #Fixed a crash caused by editing multiple TUFLOW BC coverage arcs at the same time.
    23 KB (3,874 words) - 23:46, 9 January 2023
  • WMS:Release Notes WMS
    *14947 WMS Crash with Ridge arcs *14605 Arcs to Breaklines tool crashes WMS when selecting a flood barrier arc.
    160 KB (20,922 words) - 16:37, 15 May 2024
  • WMS:WMS Dialog Help
    * [[WMS:GSSHA Embankment Arcs|Embankment Arc Profile Editor]] | 3413 | IDD_GSSHAARCEMBANKMENTATTS
    24 KB (2,949 words) - 22:22, 27 January 2020
  • WMS:WMS 11.0 Dialog Help
    * [[WMS:GSSHA Embankment Arcs|Embankment Arc Profile Editor]] | 3413 | IDD_GSSHAARCEMBANKMENTATTS
    25 KB (3,064 words) - 22:24, 27 January 2020
  • WMS:WMS 11.1 Dialog Help
    * [[WMS:GSSHA Embankment Arcs|Embankment Arc Profile Editor]] | 3413 | IDD_GSSHAARCEMBANKMENTATTS
    25 KB (3,075 words) - 19:58, 1 September 2022
  • WMS:WMS 11.2 Dialog Help
    * [[WMS:GSSHA Embankment Arcs|Embankment Arc Profile Editor]] | 3413 | IDD_GSSHAARCEMBANKMENTATTS
    25 KB (3,079 words) - 18:13, 16 May 2023
  • WMS:WMS 99.99 Dialog Help
    * [[WMS:GSSHA Embankment Arcs|Embankment Arc Profile Editor]] | 3413 | IDD_GSSHAARCEMBANKMENTATTS
    26 KB (3,205 words) - 18:12, 16 May 2023
  • SMS:SRH-2D Files
    |MAP||Mesh Arcs Information
    21 KB (2,926 words) - 23:28, 11 January 2024
Retrieved from "https://www.xmswiki.com/wiki/Special:Search"